Seeley MagIQtouch User manual

OWNER’S MANUAL
MagIQtouch Controller
Original English Instructions

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |1
Hello and congratulations on purchasing
a MagIQtouch Controller for your home!
The MagIQtouch Controller is a versatile and intelligent Controller
that can be used with a range of products from Seeley International.
Please refer to the relevant sections in this manual as well as
the owner’s manual provided with each of your products for
information on how to set-up and operate your system.

2 |
GENERAL TIPS 3
QUICK START 4
OPERATION 10
NAVIGATION 10
SIMPLE DISPLAY 13
MANUAL MODE 14
PROGRAM MODE 15
SETTINGS MENU 23
GENERAL MENU 25
COOLER & HEATER MENUS 26
About Appliance 26
Min / Max Set Temperature 27
Night Quiet Mode 28
Status Information Display 28
SERVICE MENU 29
WARNINGS & SERVICE MESSAGES 30
SLAVE CONTROLLERS 32
POWER OUTAGES 33
TROUBLE SHOOTING 33
TABLE OF CONTENTS

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |3
• Mount the MagIQtouch Controller in a room you want climate
controlled. Ideally it should be positioned 1.2m from the oor
and away from any other heating or cooling sources.
• Ensure the MagIQtouch Controller is not exposed to direct
sunlight as this will impact the temperature reading.
• Ensure any cable routing holes in the wall behind the
MagIQtouch Controller are blocked as drafts can impact the
temperature reading.
• Avoid blocking or restricting the vent holes located in the side
of the MagIQtouch Controller, as this is where the thermostat is
located.
• Ensure the plug is properly located into the socket located
in the rear of the MagIQtouch Controller before mounting it.
• Do not use harsh chemical cleaners to clean the touch screen.
For best results use distilled water or a touchscreen specic
cleaning agent with a microbre cloth.
GENERAL TIPS

4 |
Here’s a brief visual guide to get you started quickly!
Continue reading for detailed instructions.
STEP 1
Activate screen
QUICK START
ILL1521-B
ILL1522-B

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |5
STEP 2
Select mode from lower taskbar
QUICK START cont
ILL1523-B
ILL1524-B

6 |
STEP 3
Turn on cooler or heater
QUICK START cont
ILL1525-B
ILL1526-B

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |7
STEP 4
Set desired temperature
QUICK START cont
ILL1527-B
ILL1528-B

8 |
STEP 5
Access more advanced options by expanding the lower taskbar
QUICK START cont
ILL1529-B
ILL1530-B

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |9
STEP 6
Access wall control and system settings in the SETTINGS menu.
QUICK START cont
ILL1531-B
ILL1532-B

10 |
NAVIGATION
There are a few things you might need to know in order to navigate
your new MagIQtouch Controller.
If you are unfamiliar with touch screen technology, the following
section outlines some of the sliders and buttons you will need to
use throughout the interface.
Slide for quick temperature adjustment:
OPERATION
Tap for incremental adjustment or press and hold:
Slide on and off:
ILL1533-B
ILL1534-B
ILL1535-A

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |11
OPERATION cont
The lower taskbar is the section at the bottom of the screen. This
is where you’ll be able to select your primary mode (cool, heat or
fan only). Just be aware that you’ll only see icons that are relevant
to your installation as the MagIQtouch Controller knows what it’s
attached to.
NAVIGATION cont
Make your selection(s):
The header is the top section of your screen. This is where,
most importantly, you’ll nd the on/off button for your system.
Press mode option buttons:
ILL1541-B
ILL1537-A
ILL1538-B
ILL1539-A

12 |
OPERATION cont
NAVIGATION cont
The operating space in between will change depending
on what mode you have selected.
The lower taskbar can be expanded to reveal more advanced
control options. Here you can choose to operate manually or
with a 7 day program. You can also access the settings menu
for more options again.
ILL1540-A
ILL1541-B
ILL1542-A

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |13
SIMPLE DISPLAY
There is no need to display advanced functionality if it is
not required. In simple display you can set your mode and
temperature and let the MagIQtouch Controller do the rest.
OPERATION cont
ILL1543-B
ILL1527-B
Note! In the case of a heater, the temperature slider will change to
dark grey (fan running) to orange (gas and ame present).

14 |
MANUAL MODE
If you want full minute-to-minute control of your system, use
MANUAL mode.
An evaporative cooler running in Manual TEMP mode will try to
maintain the temperature you want by speeding up or slowing
down the fan.
OPERATION cont
Alternatively, using Manual SPEED mode, you can choose to
disregard the room temperature and keep the cooler running at a
constant fan speed.
Gas ducted heaters and add-on coolers, however, work differently.
In un-zoned installations you can control both the temperature and
the fan speed limit simultaneously.
ILL1544-B
ILL1895-A

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |15
Note! In zoned installations with more than one temperature
sensing device, fan speed is automated and so will not appear on
your screen.
PROGRAM MODE
If you like routine and want to “set and forget” a seven day
program that suits your lifestyle, activate PROGRAM mode.
PROGRAM mode divides each day into four time periods.
You decide when each of these periods begins and what
you want your system to be doing.
ILL1545-B
ILL1546-B
OPERATION cont

16 |
OPERATION cont
PROGRAM MODE cont
Program mode is exible.
If you leave or arrive home early, you can easily skip
forwards to the next period. The program will take over
again once the next time period begins.
ILL1547-B
ILL1548-B

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |17
OPERATION cont
PROGRAM MODE cont
Or perhaps you want to make the temperature higher without
permanently changing your program. The OVERRIDE button
will allow you to temporarily change what’s been set by the
program until the next time period begins.
ILL1549-B

18 |
OPERATION cont
PROGRAM MODE cont
To set up a program rst press the EDIT button on
the PROGRAM home screen.
This will take you to a program overview screen where
you can tap each day to see what’s been set.
ILL1550-B
ILL1551-A
ILL1552-A