Seeworld S119 User manual

1
SEEWORLD S119/B GPS Tracker
USER MANUAL
1. Product Features..................................................................................................................................2
2. Product Specification...........................................................................................................................2
3. Operation Guide............................................................................................................................... 3
3.1 Package ........................................................................................................................................ 3
3.2 Start to Use ................................................................................................................................. 3
3.3 Installation Guide ......................................................................................................................4
3.4 Status Indication ....................................................................................................................... 4
3.5 Message Instruction .................................................................................................................5
3.6 Query Instruction ...................................................................................................................... 7
4 Use the web service............................................................................................................................... 9

2
1. Product Features
S119 is a GPS+GSM data terminal, with easy installation and easy to use.
product main features :
No Function Descriptions S119B S119
1 GSM Quad band supported Yes Yes
2 Newest generation u-blox GPS chipset u-blox 7 Yes Yes
3 Wide range power input 8-45V DC Yes Yes
4 ACC(Ignition) detection N/a Yes
5 Fuel supply remote control N/a Yes
6 Internal battery for wire-cut alarm N/a Yes
7 Ultra-low power mode 1mA@12V Yes Yes
8
10000 points history trace can be saved without GSM
coverage
Yes Yes
9
Internal monitoring chip for automatic restore after
system crash or error detected.
Yes Yes
10
Quick GPS fixed with the u-blox Assist-GPS technology
Yes Yes
11 3 LEDs for status indication Yes Yes
12 Hardware design with surge protection Yes Yes
13 Protection for wrong wire connection Yes Yes
14 Managing GPS devices on the web Yes Yes

3
15
Managing GPS devices using apps for android phone or
iphone
Yes Yes
16 Query device information using SMS Yes Yes
17 Real time tracking support Yes Yes
18 History trace playback Yes Yes
19 Self-define GEO fence Yes Yes
20 Voice monitoring N/a Yes
2. Product Specification
-GSM Band: Quad Band GSM/GPRS supported
-GPRS: Class12/TCP/IP
-Working Voltage: 8-45vDC
-Working Current: 20mA@12vDC (ACC ON)
1mA @ 12vDC (ACC OFF)
-GPS Chipset: u-blox G7020
-GPS Channels: 56
-Tracking Sensitivity: -162dBm
-GPS Fixed Time Cold Start<29s(Open sky)
Warm Start<29s

4
Hot Start<1s
Aided Start 10s
-Battery 1000mAh (S119 only, S119B none)
-Working Temperature: -20℃~+60℃
-Humility: 20%~60%RH
-Size: 72mm x 47mm x 22mm
-Weight: 60g
-LED Indicators RED-GSM, YELLOWGREEN-GPRS, BLUE-GPS
3. Operation Guide
3.1 Package
Packing List:
-S119 Device 1PCS
-Power supply cable 1PCS
-User manual 1PCS
-RELAY (Optional)
3.2 Start to Use
Important notice:
-Insert SIM card then connect the power to the device.
-SIM card must support GPRS service.

5
-SIM card must be in service.
-If SIM card require PIN code, please use other GSM mobile handset to
remove the pin code.
-For oversea user, please check if the APN settings require or not.
-If you are an oversea user, please set the language(EN) by sending
SMS to the device with: LANG,0#
3.3 Installation Guide
Connection Diagram
PIN No Color Description

6
1 RED Power supply 8-45V DC
2 BLACK Ground
3 GREEN
ACC detection, when key-in and turn to ACC position,
ACC goes level high.
4 YELLOW Relay control driving signal
Please use 12V RELAY in 12V system, use 24V RELAY in 24V system like
bus and truck.
3.4 Status Indication
No LED Color Status Descriptions
1 RED Light GSM work normal
Blink No GSM signal
2 BLUE Light
GPRS connected to the
server.
Blink GPRS connection failed.
3 YELLOW-GRE
EN
Light GPS fixed.
Blink GPS searching.
Note
The LEDs will light up about 5 minutes, then turn off to save power, if
you want to check the status, just call the phone number of the device.

7
3.5 Message Instruction
1) APN Settings
Instruction Format example
APN Setting 1 APN,
APN-Name,user,psw#
APN,ac.vodafone.es,vodafone,vodaf
one#
APN Setting 2 APN, APN-Name# APN,cmnet#
Note:
APN settings are difference in difference country, if password
require please follow setting 1, otherwise setting 2.
Examples: Send “APN,cmnet#”
Return “Set APN OK! ”
Notice: do not include the colon in the message.
2) TIMER Settings
Instruction Format example
TIMER Setting TIMER,n# TIMER,20#
Note:
When n=0, stop data upload, device working in ultra low
power mode, only phone call or query SMS will active the GPS
work for a moment.
When 10≤n≤300, device upload data every n seconds.
When n≥300, GPS work for a moment after n seconds, then

8
shut down GPS when finish the data upload.
Examples:
Send “TIMER,20#”
Return “TIMER set ok. Now data upload period is 20
seconds. ”
3) CENTER Number Setting
Instruction Format example
Add Center Number CENTER,A,13811111
111#
CENTER,A,13811111111#
Delete Center Number CENTER,D # CENTER,D#
Note:
1) Only center number can send RELAY control message.
2) Only one center number can be set.
3) Center number will receive the wire-cut alarm message.
Examples: Send “CENTER,A,13811111111”
Return “SET CENTER TEL OK. TEL Number is 13811111111.”
4) RELAY Control
Instruction Format example
RELAY control enable RELAY,1# RELAY,1#
RELAY control disable RELAY,0# RELAY,0#
Note:
1) Send this message to make remote control like fuel

9
supplement.
2) Only work when the center number being set.
1) For safety reason, when device get this message, it will
stop the fuel supplement when speed < 20Km.
Examples: Send: “RELAY,1#”
Return “RELAY ON!”
5) WL (User Define Fence) Setting
Instruction Format example
User Define Fence WLn WL300
Note: When fence being set, device out of the defined area, sender
will get an alarm message.
Examples: Send “WL400”
Return “...”
6) Restore Factory Setting
Instruction Format example
Restore Factory default FACTORY # FACTORY #
Note:
Restore factory setting, part of settings will restore factory
default.
Examples: Send “FACTORY#”

10
Return“Factory Reset OK”
7) Device RESET
Instruction Format example
RESET RESET # RESET #
Note: Device will reboot.
Example: Send “RESET#”
Return none, system reboot when receive this SMS.
8) Language Setting
Instruction Format example
Chinese LANG,1# LANG,1#
English LANG,0# LANG,0#
Note:
If Chinese selected, device will return landmark description in
Chinese, if English set, it will return URL.
Example: Send “LANG,1#”
Return “SET LANGUE OK, New LANGUAGE is CHINESE”

11
9) GMT Time Zone
Instruction Format example
Time Zone Setting GMT,E/W,0~12,0/15/
30/45
GMT,E,8,0#
Note: Device use UTC+8 as default time zone.
E: Ease；W: West
0~12, UTC difference.
0/15/30/45, Half time zone.
Examples: Send “GMT,E,8,0#”
Return “Now Time Zone is UTC+8.”
10) SOS Settings
Instruction Format example
Set the SOS
numbers
SOS,A,1=?,2=?,3=
?#
SOS,D,?,?,?#
SOS,A,1=13811111111,2=13811111111,3=13
811111111#
Note:
You can set 3 SOS numbers, only the SOS number can make call
connected, and then start the voice monitoring.
Examples: Sent “SOS,A,1=13811111111,2=13811111111,3=13811111111#”
Return “Add SOS TEL

12
OK!1=13811111111,2=13811111111,3=13811111111”
Sent “SOS,D,2,3#”
Return “Delete SOS TEL2 And TEL3 OK!”
11) HB Call Back
Instruction Format example
Voice monitoring HB# HB#
Note:
When SOS number being set, send “HB” will get a call back,
you can answer to start voice monitoring.
Examples: n/a
3.6 Query Instruction
1) Query Parameters
Instruction Format example
Query Device
Information
PARAM# PARAM#
Note: Use this instruction to query device main parameters.
Examples: Send “PRARM#”

13
Return:
IMEI:68XXXXXXXXXXXXX;
APN:cmnet;
IP:gm901.szdatasource.com:8841;
TIMER:10S;
CENTER TEL:0;
LANGUAGE:CN;
TIME ZONE:8.00;
ATWL:300
2) Query Device Working Status
Instruction Format example
STATUS STATUS# STATUS#
Note:
Use this message to check the device working status, like
GSM, GPRS, GPS status.
Examples: Send “STATUS#”
Return:
BATTERY:100%,
GPRS:NORMAL, (Connect to server successfully)
GSM Signal:MIDDLE, (GSM signal level)
GPS: FIXED, (GPS status)

14
GPS Signal:MIDDLE, (GPS signal level)
ACC:OPEN,
RELAY:DISABLED,
CHARGER:NORMAL
3) URL
Instruction Format example
URL URL# URL#
Note: Use this SMS to query the position on Google map.
Example:
<UTCTime:10-11-18
18:41:04>http://maps.google.com/maps?q=N22.540885,E
113.951341
4) 123
Instruction Format example
Query address in Chinese
123 123
Note:
Use this SMS to query address in Chinese, if language is
English, it will return URL, the same as URL message.
Examples: Send “URL”
Return “...”

15
4 Use the web service
Visit web with the account and password that the distributor provided.
www.justrack.com demo 123456
5 Trouble shooting
When finish installation, please check the device work normal or not? If work
abnormal, please check with the following steps:
1) Call the phone number on the device, check if the SIM register to the GSM
network?
2) Is the APN being set for oversea user? Set the correct APN according the
manual.
3) Is the SIM with GPRS service? You can use a cell phone to browser a web site to
check.
4) Please make sure you test the GPS in open sky.
5) Call for technical support, if the problem can not fix.
SEEWORLD Technology Corp. Ltd.
Contact:Helen Li
Mob:[phone]
Skype:seeworldsales
Email: [e-mail]