3
“BIJOU”WALL SCULPTURE
Assembly Instructions
NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR
REQUIRED WHEN MOUNTING TO WOOD WALL USE
SCREW ONLY WE DO NOT SUPPLY HARDWARE FOR
MOUNTING ON CONCRETE WALLS
Step 1:
Drill two 1/4" oles
on wall.
One screw must be attac ed
directly into a wall stud. Wall
anc or is not needed w en
mounting to wall stud.
Insert plastic anc ors ( A )
into t e oles of wall as
s own.
(W en doing t is, you will
need a ammer elp you).
Using t e p illips ead
screwdriver, install screw (B)
into eac of t e anc ors (A).
Turn t e screw (B ) in until
t ere is a gap of 3mm
between t e ead of t e
screw and t e wall as s own.
Install t e unit onto t e
screw (B) and secure t e
bracket is resting securely
on t e mounting screw (B)
.
"the holes measurement on wall must match with
the holes measurement on back of the unit"