SEI CLAREMONT FA931000TX-CHERRY User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
“CLAREMONT” CONVERTIBLE MEDIA FIREPLACE
FA9 1000TX-CHERRY
FA9 1400TX-IVORY
FA9 1500TX-BLACK
FA9 1600TX-BROWN MAHOGANY
FA9 1700TX-GLAZED PINE
Assembly Instructions

A Quantity
of 22
CAM BOLT
B Quantity
of 2
WOOD DOWEL
C Quantity
of 22
CAM LOCK
D Quantity
of 4
SOCKET HEXAGON BOLT
E Quantity
of 4
SPRING WASHER
F Quantity
of 4
FLAT WASHER
G Quantity
of 1
ALEN WRENCH
H Quantity
of 4
CROSS SOCKET NUT
I Quantity
of 2
MAGNET LOCK
J Quantity
of 2
MAGNET PLATE
K Quantity
of 22
FLAT HEAD SHORT SCREW
L Quantity
of 8
FLAT HEAD LONG SCREW
M Quantity
of 16
ROUND HEAD SCREW
N Quantity
of 2
KNOB
O Quantity
of 2
LONG BOLT
P Quantity
of 16
SHELF HOLDER
Q Quantity
of 4
HINGE
R Quantity
of 22
COVER
“CLAREMONT” CONVERTIBLE MEDIA FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra
hardware with your unit.

(1) Quantity
of 1
TOP PANEL
(2) Quantity
of 1
CORNER TOP PANEL
(3) Quantity
of 2
FRONT SIDE PANEL (L/R)
(4) Quantity
of 2
SIDE PANEL (L/R)
(5) Quantity
of 2
MIDDLE PARTITION PANEL (L/R)
(6) Quantity
of 1
SHELF PANEL
(7) Quantity
of 1
BASE
(8) Quantity
of 1
BACK PANEL
(9) Quantity
of 4
ADJUSTABLE SHELF PANEL (L/R)
(10) Quantity
of 2
DOOR (L/R)
(11) Quantity
of 1
INSERT FIXED BAR
(12) Quantity
of 1
INSERT (sold in a separate carton)
C re nd Cle ning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
CLAREMONT CONVERTIBLE MEDIA FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra
hardware with your unit.

Figure 1
INSERT（A）CAM BOLT &（B）WOOD
DOWEL TO THE RELATED
HOLES,THEN USE（C）CAM LOCK
TO CONNECT (5) SUPPORT
PANELS&(6) SHELF PANEL.
FINALLY PLACE (R) COVER IN
CAM LOCK.
Figure 2
AFTER ASSEMBLED FIGURE
1,INSERT（A）CAM BOLT &（B）
WOOD DOWEL TO THE RELATED
HOLES,THEN USE（C）CAM LOCK
TO CONNECT ( )FRONT SIDE
PANEL
FINALLY PLACE (R) COVER IN THE
CAM LOCK.
Figure 3
AFTER ASSEMBLED FIGURE
2,INSERT（B）WOOD DOWEL TO
THE RELATED HOLES ,THEN USE
(L) WOOD SCREW TO CONNECT
(4) SIDE PANEL.
CLAREMONT CONVERTIBLE MEDIA FIREPLACE
Assembly Instructions

Figure 4
AFTER ASSEMBLED FIGURE
,INSERT（A）CAM BOLT &（B）
WOOD DOWEL TO THE RELATED
HOLES,THEN USE （C）CAM LOCK
TO (1) CONNECT TOP PANEL .
FINALLY PLACE (R) COVER IN
CAM LOCK.
Figure 5
AFTER ASSEMBLED FIGURE
4,INSERT（A）CAM BOLT &（B）
WOOD DOWEL TO THE RELATED
HOLES,THEN USE（C）CAM LOCK
TO CONNECT (7) BASE .
INSERT(D) SOCKET HEXAGON
BOLT TO THE RELATED HOLES
THROUGH(E) SPRING WASHER&
(F)FLAT WASHER,THEN PLACE (R)
COVER IN THE CAM LOCK .
Figure 6
AFTER ASSEMBLED FIGURE 5,
USE （M）WOOD SCREW TO
CONNECT (8) UPPER BACK
PNAEL .
CLAREMONTCONVERTIBLE MEDIA FIREPLACE
Assembly
Instructions

Figure 7
AFTER ASSEMBLED FIGURE 6,
USE（K）WOOD SCREW & (Q)
HINGE TO CONNECT (10)DOORS .
INSERT (P) SHELF HOLDER TO
THE RELATED HOLES,THEN PUT
(9) ADJUSTABLE SHELF PANELS
ON THE （P）SHELF HOLDERS.
THEN USE(M) WOOD SCREW AND
(I) MAGNET LOCK ON THE
RELATED HOLES; USE (K) WOOD
SCREW AND (J) MAGNET PLATE
ON THE RELATED PLACE.
PUT(10) DOOR TO THE RELATED
PLACE ASSEMBLED(N) KNOB TO
THE RELATED PLACE OF DOOR,
LOCK BY(O) LONG BOLT.
Figure 8
ATFER ASSEMBLED FIGURE 7,
USE （K） WOOD SCREW TO
CONNECT (2) CORNER TOP
PANEL .
Figure 9
PULL -OUT OF THE WOOD BAR
FORM THE SURPORT WOOD
SLIDE, SO THE CORNER TOP
PANEL WILL KEEP PARALLEL
WITH THE TOP PANEL.
CLAREMONT CONVERTIBLE MEDIA FIREPLACE
Assembly Instructions

Figure 10
PUSH (R) INSERT TO THE
RELATED PLACE OF MAIN BODY.
Figure 11
INSERT THE (L) WOOD SCREW
INTO THE RELATED HOLES OF
(11) INNER FIXED BAR ,THEN
USE SCREWDRIVER TO LOCK IT
TIGHTLY.
CLAREMONT CONVERTIBLE MEDIA FIREPLACE
Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

CAUTION
The top shelf of this cabinet is intended for plasma/LCD televisions having a
Max TV size is 42" flat screen and Max weight limit is 70 lb.
The top shelf is NOT INTENDED for tube televisions.
Each
centershelfshouldnotbeloadedwithmorethan20lb.Eachsideshelfshouldnotbeloadedwithmoretha10 lb
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside drawer.
Do not allow children under 16 years old to move the cart.
Model: FA9 2600TX/ FA9 2700TX
KINGSBURYMEDIA FIREPLACE
Southern Enterprises, Inc
1970 Crown Drive
Manufacture Date:
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 46” and
supports up to 85lb.
Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded
with more than 10 lb.The extension panel not be loaded with more than 6 LBS.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside drawer.
Do not allow children under 16 years old to move the cart.
Model: FA9 1000TX/FA9 1400TX
FA9 1500TX/FA9 1600TX
FA9 1700TX
“CLAREMONT” CONVERTIBLE MEDIA FIREPLACE
Southern Enterprises, Inc
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Manufacture Date: