SEI FA515500 Operation instructions

ELECTRIC
ELECTRIC
ELECTRIC
ELECTRIC FIREBOX
FIREBOX
FIREBOX
FIREBOX INSERT
INSERT
INSERT
INSERT
USER
USER
USER
USER ’
’
’
’ S
S
S
S OPERATING
OPERATING
OPERATING
OPERATING MANUAL
MANUAL
MANUAL
MANUAL
CONSUMER
CONSUMER
CONSUMER
CONSUMER SAFETY
SAFETY
SAFETY
SAFETY INFORMATION
INFORMATION
INFORMATION
INFORMATION
PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING
THIS APPLIANCE
WARNING!!!
WARNING!!!
WARNING!!!
WARNING!!!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN
ELECTRIC SHOCK OR FIRE MAY RESULT IN PROPERTY
DAMAGE,PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.
Thank you very much for purchasing our electric fire box insert . Please read
this instruction carefully before connecting your device to an electrical source.
In order to avoid damage due to incorrect use, please pay particular attention
to the safety information. If you pass the device on to a third party users, thi s
instruction must also be handed over
STYLE NO . : FA515500TX
FA515500TX
FA515500TX
FA515500TX
SOUTHERN
SOUTHERN
SOUTHERN
SOUTHERN ENTERPRISES
ENTERPRISES
ENTERPRISES
ENTERPRISES INC.
INC.
INC.
INC.
RELAX … If you can follow a few easy, step-by-step directions
In or der .YOU CAN ASSEMBLE THIS ITEM.
Safety Feature :
A thermal overload protector is build in to the heater to prevent overheating.
When an overheat temperature is reached, the heater will automatically shut
off. It can only resume operation when the unit reset (See the instructions
below)
To Reset Heater:
Unplug the heater and wait about 10 minutes for the unit to cool down.
After about 10 minutes, plug the heater in again and follow the Operations
Instructions described in the beginning of this manual.

IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:
1. Read all instructions before using this heater.
2. Extreme caution is necessary when any heater is used by or near children or
whenever the heater is left operating and unattended.
3. Always unplug heater when not in use.
4. Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater to
authorized service facility for examination, electrical or mechanical adjustment, or
repair.
5. Do not use outdoors.
6. This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations. Never locate heater where it may fall into a bathtub or other water
containers.
7. Do not run cord under the carpet. Do not cover cord with throw rugs, runners, or
similar items. Place cord away from traffic area and where it will not be tripped over.
8. To disconnect heater, turn controls to off, then remove plug from outlet.
9. Connect to properly grounded outlets only.
10 . Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or damage to the heater
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where openings may be blocked.
12. A heater has hot and sparking parts inside. Do not use it in areas where gasoline,
paint, or flammable liquids are near, used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury to persons.
14. Avoid the use of an extension cord since the extension cord may overheat and cause
a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16
AWG minimum size and rated not less than 1875 watts. A three-wire cord with
grounding type plug and cord connector is needed.
15. “ SAVE
SAVE
SAVE
SAVE THESE
THESE
THESE
THESE INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS ”
”
”
” .
.
.
.

SAFETY
SAFETY
SAFETY
SAFETY INFORMATION
INFORMATION
INFORMATION
INFORMATION
1. Before connecting the appliance to the electrical source, check that the current and
power match those given on the rating plate.
2.
2.
2.
2. Do not put the appliance or the plug in water or any other liquid. However, should the
appliance accidentally fall into water, unplug the appliance immediately and have it
checked by a qualified person before using it again. Non-observance
Non-observance
Non-observance
Non-observance could
could
could
could cause
cause
cause
cause a
a
a
a
fatal
fatal
fatal
fatal electric
electric
electric
electric shock!
shock!
shock!
shock!
3. Never attempt to open the housing by yourself.
4. Do not use the appliance with wet hands, on a damp floor or when the appliance itself is
wet.
5. Do not touch the plug with wet or damp hands.
6. Never attempt to repair the appliance yourself. This could cause an electric shock.
7. Do not allow the cord to hang over sharp edges and keep it away from hot objects and
naked flames. Remove the plug form the socket only by holding the plug.
8. For extra protection it is possible to fit the electric household installation with a fault
current breaker with a rated breaking current of not more than 30mA. Ask your
electrician for advice.
9. Never leave the appliance unattended while it is in use.
10. Children cannot recognize the dangers involved in incorrect use of electrical appliances.
Therefore, never allow children to use household appliances without supervision.
11. Always remove the plug from the socket when the appliance is not in use and each time
before it is cleaned.
12. Danger!
Danger!
Danger!
Danger! Nominal voltage is still present in the appliance as long as the appliance is
connected to the electrical source.
13. Never use the cord to carry the appliance.

14. The appliance must not be used if the glass is damaged.
15. This heater is for use on 120 volts electrical outlet. The cord has a plug as shown in
figure A. An adapter as shown as in figure C is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The green grounding plug extending fr om
the adapter must be connected to a permanent ground such as a properly grounded
outlet box. The adapter should not be used if a three-slot grounded receptacle is
available.
SPECIAL
SPECIAL
SPECIAL
SPECIAL SECURITY
SECURITY
SECURITY
SECURITY ADVICE
ADVICE
ADVICE
ADVICE
1. Only use on an even and stable surface to avoid the appliance from tipping over.
2. Keep a minimum distance of 1 m to furnitures, curtains and other flammable materials.
Do not place the appliance underneath a power socket.
3. Do not use the appliance in rooms in which highly flammable materials such as gas,
paints, gasoline, solvents, etc. are stored.
4. To avoid overheating and fire, never cover the appliance and its vents.
5. Do not use the appliance in bathrooms, laundry rooms or other equally moist places.
6. Do not place the power cord underneath carpets etc.
7. The warm air vent becomes very hot during operation. During operation, only touch the
appliance ’ s switches and handles.
8. The appliance must not be moved when hot. Never touch the hot parts with your bare
skin.

HELPFUL
HELPFUL
HELPFUL
HELPFUL ADVICE
ADVICE
ADVICE
ADVICE BEFORE
BEFORE
BEFORE
BEFORE FITTING
FITTING
FITTING
FITTING
1. These instructions are provided in an easy to follow style. Simply follow the instructions in
sequence to fit this product.
2. Please retain all packaging until you have checked and counted all the parts and the
contents of the fixing pack against the parts list.
3. The fixing pack contains small items, which should be kept away from young children. We
suggest that you open the fixing pack and place all the contents into a container, therefore
reducing the risk of losing any small pieces.
4. The area around the unit should be kept free of animal hair, lint and other extraneous
material that may be drawn into the workings of the appliance and could affect its
performance.
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
ATTENTION
ATTENTION
ATTENTION
ATTENTION : Mantels are not intended to accommodate electronic equipment on or above
them due to the heat being generated. Mantels are intended to be used for decorative
accessories only .

POSITIONING/LOCATING
POSITIONING/LOCATING
POSITIONING/LOCATING
POSITIONING/LOCATING YOUR
YOUR
YOUR
YOUR
CHARMGLOW
CHARMGLOW
CHARMGLOW
CHARMGLOW ELECTRIC
ELECTRIC
ELECTRIC
ELECTRIC FIREPLACE
FIREPLACE
FIREPLACE
FIREPLACE
When choosing a location for your new fireplace, ensure that the general instructions are
properly followed. For best result, install the fire place out of direct sunlight.
ATTENTION
ATTENTION
ATTENTION
ATTENTION ：Cold climate installation recommendation: When installing this unit against a
non-insulated exterior, it is mandatory that the outer walls be insulated to conform to
applicable insulation codes.
ELECTRICAL
ELECTRICAL
ELECTRICAL
ELECTRICAL CONNECTION
CONNECTION
CONNECTION
CONNECTION
A 15 AMP,120 Volts,60 Hz circuit with a properly grounded outlet is required. It ’ s
recommended that the fire place will be on a dedicated circuit as other appliances on the
same circuit may cause the circuit breaker to trip or blow the fuse to blow when the heater is
in operation.
CLEANING
CLEANING
CLEANING
CLEANING TRIM
TRIM
TRIM
TRIM
Clean the metal trim using a soft cloth dampened with a citrus oil based product and buff
with a clean soft cloth. DO NOT use brass polish or household cleaners as these products
may damage the metal trim. Citrus oil based products can be obtained at supe rmarkets or
hardware stores.
ELECTRICAL
ELECTRICAL
ELECTRICAL
ELECTRICAL SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Voltage:
120VAC, 60 Hz
Amps:
Amps:
Amps:
Amps:
12.5
12.5
12.5
12.5 Amps
Amps
Amps
Amps
Watts:
1 5 00 Watts
Lighting:
LED

OPERATING
OPERATING
OPERATING
OPERATING INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
CONTROL
CONTROL
CONTROL
CONTROL PANEL
PANEL
PANEL
PANEL OPERATING
OPERATING
OPERATING
OPERATING PROCEDURES
PROCEDURES
PROCEDURES
PROCEDURES
Control panel on the front unit
Thermostat Instructions (LOW, MED & HIGH)
1. Allow the Heater to warm up the room before setting the thermostat.
2. When the desired temperature is reached, lower the thermostat until the unit shuts
off. This is done by turning the Thermostat Knob towards (LOW)
3. The heater will now automatically maintain the set temperature by cycling on and
off. To prevent the Heater from cycling, adjust the thermostat.
4. To adjust the thermostat, turn the thermostat knobs towards (HIGH) to increase the
desired temperature and towards (LOW) to decrease the desired temperature.
NOTE: It is normal for the Heater to cycle ON and OFF as it maintains the desired
temperature.

MATENANCE
1 CLEANING YOUR FIREPLACE
2 CLEANING THE FRONT GLASS

TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING

C
C
C
C ONSERVATION
ONSERVATION
ONSERVATION
ONSERVATION TERMS
TERMS
TERMS
TERMS
1. Keep the electric fire box insert in the dry environment between -25 ℃and 40 ℃.
2. For the best effect, place the electric fir ebox insert is out of direct sunlight, rain, etc.
PARTS
PARTS
PARTS
PARTS REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT FORM
FORM
FORM
FORM
ITEM
ITEM
ITEM
ITEM NO
NO
NO
NO :
:
:
:FA515500TX
FA515500TX
FA515500TX
FA515500TX
Customer Name
PARTS
LETTER
PART
DESCRIPTION
QUANTITY
NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
Please indicate color/size/style number
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229
/ /