SEI FA928500TX-Mission Oak User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
ATTENTION:
The Extension panel not be loaded with more than 6 LBS
"CARTWRIGHT"CONVERTIBLE FIREPLACE
FA928500TX-Mission Oak
FA928600TX-IVORY
FA928700TX-ESPRESSO
ASSEMBLY INSTRUCTION

A B
C D
E F
G H
I J
"CARTWRIGHT"CONVERTIBLE FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
Quantity
Of 8
CAM BOLT
Quantity
Of 14
WOOD DOWEL
Quantity
of 8
CAM LOCK
Quantity
of 6
SOCKET HEXAGON BOLT
Quantity
of 1
ALLEN WRENCH
Quantity
of 6
CROSS SOCKET NUT
Quantity
of 6
SPRING WASHER
Quantity
of 6
FLAT WASHER
Quantity
of 2
Quantity
of 6
WOOD SCREW WOOD SCREW

(1) (2)
(3) (4)
(5) (6)
(7) (8)
(9) (10)
(11) (12)
Care and Cleaning In truction :
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
A embly Tool Required
No.2 Phillip Screwdriver (Not Included)
"CARTWRIGHT"CONVERTIBLE FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
Quantity
of 1
TOP PANEL
Quantity
of 1
RIGHT SIDE PANEL
Quantity
of 1
LEFT FRONT PANEL
Quantity
of 1
RIGHT FRONT PANEL
Quantity
of 1
MIDDLE FRONT PANEL
LEFT SIDE PANEL
Quantity
of 1
LEFT MIDDLE SIDE PANEL RIGHT MIDDLE SIDE PANEL
BASE CORNER TOP PANEL
INSERT FIXED BAR INSERT (sold in a separate box)
Quantity
of 1
Quantity
of 1
Quantity
of 2
Quantity
of 1
Quantity
of 1
Quantity
of 1

INSERT（A）CAM BOLT &（B）WOOD DOWEL
TO THE RELATED HOLES OF (2) LEFT SIDE
PANEL& (4) )RIGHT SIDE PANEL,THEN USE
（C）CAM LOCK TO CONNECT (2)LEFT SIDE
PANEL&(4)LEFT FRONT PANEL , ( )&(5)
CONNECT PLS DO THE SAME STEP AS
(2)&(4).
AFTER ASSEMBLED FIGURE 1,INSERT（B）
WOOD DOWEL & (H) CROSS SOCKET NUT
TO THE RELATED HOLES ,THEN USE (D)
SOCKET HEXAGON SCREW CROSS (E)
SPRING WASHER &(F) FLAT WASHER TO
CONNECT (7) BASE.
INSERT LEFT MIDDLE SIDE PANEL(7) &
RIGHT MIDDLE SIDE PANEL(8) INTO
ASSEMBLED UNIT IN THE FIGURE 2 BY
WOOD DOWEL(B)
"CARTWRIGHT"CONVERTIBLE FIREPLACE
Assembly Instructions
Figure 1
Figure 2
Figure 3
7
8

ATTACH MIDDLE FRONT PANEL(6) TO
LEFT
MIDDLE SIDE PANEL(7) & RIGHT MIDDLE
SIDE PANEL(8) BY SLIPPING WOOD
DOWEL(B) & CAM BOLT(A) UNTIL MIDDLE
FRONT PANEL(6) & LEFT MIDDLE SIDE
PANEL (7) & RIGHT MIDDLE SIDE PANEL
(8)MEET.SECURE BY ROTATING CAM LOCK
(C) COUNTERCLOCKWISE WITH PHILLIPS
SCREWDRIVER
AFTER FINISHED FIGURE 4 ,INSERT (I)
WOOD SCREW INTO BACK SIDE OF 6,7,8
AND HALFWAY FASTEN THESE SCREWS.
FIT TOP PANEL (1) ONTO FIGURE 5 THEN
FASTEN ALL 6,7,8 WITH SCREWS (I).
ALSO INSERT (I) WOOD SCREW INTO
UPPER HOLES OF 2, ,4,5,6 PANELS TO
CONNECT WITH TOP PANEL.
"CARTWRIGHT"CONVERTIBLE FIREPLACE
Assembly Instructions
Figure 4
Figure 5
Figure 6
1

PUSH SUPPORT WOOD SLIDE TO LET THE
CORNER PANEL PARALLEL WITH THE TOP
PANEL. USING 6 SMALL WOOD SCREWS
(J) FASTEN PRE-INSTALLED HINGES WITH
CORNER PANEL (10).
PUSH (12) INSERT TO THE RELATED
PLACE OF MAIN BODY ,THEN INSERT
(I)WOOD SCREW THROUGH (11)INSERT
FIXED BAR TO LOCK TIGHTLY.
"CARTWRIGHT"CONVERTIBLE FIREPLACE
Assembly Instructions
Figure 7
Figure 9
Figure 8
10

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If damages
or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019