SEI TENNYSON FA8546AO User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
"TERRI"FIREPLACE
FA8546AO – PLANTATION OAK
FA8547AO - CLASSIC MAHOGANY
FA8548AO – ANTIQUE WHITE
FA8549AO - BLACK
Assembly Instructions

A Quantity
of 11
CAM BOLT
B Quantity
of 42
WOOD DOWEL
C Quantity
of11
CAM LOCK
D Quantity
of49
FLAT HEAD LONG SCREW
"TERRI"FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with
y
our unit.

(1) Quantity
of 1
TOP PANEL
(2) Quantity
of 1
BASE
(3) Quantity
of 1
LEFT FRONT PANEL
(4) Quantity
of 1
RIGHT FRONT PANEL
(5) Quantity
of 1
MIDDLE FRONT PANEL
(6) Quantity
of 1
LEFT SIDE PANEL
(7) Quantity
of 1
RIGHT SIDE PANEL
(8) Quantity
of 2
BACK PANEL(L&R)
(9) Quantity
of 1
UPPER CROSS BRACE
(10) Quantity
of 1
LOWER CROSS BRACE
(11) Quantity
of 1
FRONT RAIL
(12) Quantity
of 1
BACK RAIL
(13) Quantity
of 3
WOOD CONNECTER
(14) Quantity
of 2
WOOD HOLDER
Quantity
of 1
FIREBOX
SOLD IN A SEPARATE CARTON
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
"TERRI"FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with your unit.

Figure 1
USE GLUE TO FILL 1/4 HOLE OF FRONT/ BACK
RAIL & WOOD CONNECTOR (11,12 &13).
INSERT 3PCS CAM-BOLT (A), AND 12PCS
WOOD DOWEL (B) INTO PREDRILLED HOLES
ON FRONT AND BACK RAILS (11&12) , AND
FIT INTO CORRESPONDING HOLES ON ENDS
OF WOOD CONNECTER (13). INSERT 3PCS
CAM-LOCK (C) INTO BIG HOLES ON
UNDERSIDE OF WOOD CONNECTER (13)
WITH SLOT FOR SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCK (B)
CLOCKWISE TO SECURE CAM-BOLT (A). THEN
INSERT 3PCS FLAT HEAD LONG SCREW (D)
THROUGH PREDRILLED HOLES ON BACK RAIL
(12) AND TIGHTEN INTO END OF WOOD
CONNECTER (13). AS FIGURE 1 SHOWN.
Figure 2
INSERT 4PCS WOOD DOWELS (B) INTO
PREDRILLED HOLES ON LEFT AND RIGHT
SIDE PANELS (6& 7) AND FIT INTO
CORRESPONDING HOLES ON LEFT AND
RIGHT FRONT PANELS (3&4). INSERT 12PCS
FLAT HEAD LONG SCREW(D) THROUGH
PREDRILLED HOLES ON WOOD BARS ON
INSIDE OF LEFT AND RIGHT SIDE PANELS
(6.7) AND TIGHTEN INTO CORRESPONDING
HOLES ON BACK OF LEFT AND RIGHT FRONT
PANELS (3.4). AS FIGURE 2 SHOWN.
Figure 3
INSERT 2PCS CAM-BOLTS (A), 12PCS WOOD
DOWELS (B) INTO PREDRILLED HOLES ON
EDGES OF LEFT AND RIGHT FRONT PANELS
(3.4), LEFT AND RIGHT SIDE PANELS (6.7)
AND FIT INTO CORRESPONDING HOLES ON
ENDS OF PARTS (5,11.12). INSERT 2PCS
CAM-LOCKS (C) INTO BIG HOLES ON BACK OF
MIDDLE FRONT PANEL (5) WITH SLOT FOR
SCREWDRIVER FACING OUTWARD. ROTATE
CAM-LOCKS (C) CLOCKWISE TO SECURE
CAM-BOLTS (A). INSERT 4PCS FLAT HEAD
LONG SCREW(D) THROUGH PREDRILLED
HOLES ON END OF BACK RAIL (12) AND
TIGHTEN INTO CORRESPONDING HOLES ON
INSIDE OF LEFT AND RIGHT SIDE PANELS
(6&7). AS FIGURE 3 SHOW
"TERRI"FIREPLACE
Assembly Instructions

Figure 4
INSERT 2PCS CAM-BOLTS (A) AND 6PCS
WOOD DOWELS (B) INTO PREDRILLED HOLES
ON UPSIDE OF BASE (2) AND FIT INTO
CORRESPONDING HOLES ON BOTTOM EDGES
OF THE ASSEMBLED UNIT. INSERT 2PCS
CAM-LOCKS (C) INTO BIG HOLES ON INSIDE
OF LEFT AND RIGHT SIDE PANELS (6&7)
WITH SLOT FOR SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCKS (C)
CLOCKWISE TO SECURE CAM-BOLTS (A). AS
FIGURE 4 SHOWN.
Figure 5
INSERT 4PCS CAM-BOLTS (A) AND 8PCS
WOOD DOWELS (B) INTO PREDRILLED HOLES
ON EDGES OF LEFT AND RIGHT BACK PANELS
(8) AND FIT INTO CORRESPONDING HOLES
ON ENDS OF UPPER AND LOWER CROSS
BRACE (9&10). INSERT 4PCS CAM-LOCKS (C)
INTO BIG HOLES ON BACK OF UPPER AND
LOWER CROSS BRACE (9&10) WITH SLOT
FOR SCREWDRIVER FACING OUTWARD.
ROTATE CAM-LOCKS (C) CLOCKWISE TO
SECURE CAM-BOLTS (A). AS FIGURE 5
SHOWN.
Figure 6
INSERT THE FRAME ON BACK OF ABOVE UNIT
ONTO CORRESPONDING FRAME UPRIGHTLY.
"TERRI"FIREPLACE
Assembly Instructions

Figure 7
INSERT 17PCS WOOD SCREWS
(D) THROUGH PREDRILLED
HOLES ON PARTS (8,9,10) AND
TIGHTEN IT CLOCKWISELY.
Figure 8
PLACE TOP PANEL (1) ONTO TOP
EDGES, ATTACH IT TO THE UNIT
BY USING 9PCS FLAT HEAD LONG
SCREW (D) AS FIGURE 8 SHOWN.
Figure 9
INSERT THE FIREBOX TO THE
UNIT. MAKE SURE THE FIREBOX
IS PRESSED TIGHTLY AGAINST
THE ASSEMBLED UNIT. ATTACH
THE WOOD HOLDERS (14) ON
THE SIDES OF FIREBOX (15).
INSERT 4PCS FLAT HEAD LONG
SCREW (D) THROUGH
PREDRILLED HOLES ON WOOD
HOLDER (14) AND TIGHTEN INTO
CORRESPONDING HOLES ON
BACK OF LEFT AND RIGHT BACK
PANELS (8). AS FIGURE 9
SHOWN.
"TERRI"FIREPLACE
Assembly Instructions
1
14
14
15

Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation
to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI.
The fireplace mantel will fit both gel fuel and electric firebox inserts. Depending on the insert ordered only
one insert will be included. Not recommended to put electronic equipment on or above a mantel due to the
heat.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
FA8546/47/48/49A0 -Parts Replacement Form