SEI MS834100TX User manual

For assistan
ce with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[email protected]
www.seidal.com
Dandridge TV/Media Stand
MS8 4100TX-Black
Assembly Instructions
PO:11740

A
Dandridge TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below.You may receive extra hardware with your unit
B C
Quantity
of 1
Quantity
of 1
Quantity
of 1
Drawer Face Panel
Drawer Left Side
Panel
Lower Middle Back Panel
Upper Middle Back Panel
Drawer Right Side
Panel
Adjustable Shelf
F
G
H
Quantity
of 1
Quantity
of 1
Qua
ntity
of 6
K
L
M
Quantity
of 1
Quantity
of 1
Quantity
of 1
S T U
Quantity
of 1
Quantity
of 1
Bottom Panel Left Middle Panel Right Middle Panel
Left Door
Right Door
Top Panel
O P Q
Quantity
of 1
Left Fixed Shelf
Right Fixed Shelf
Left Support
E
J
N
R
Quantity
of 1
Quantity
of 1
Qu
antity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 2
Quantity
of 1
Side Back Panel
Drawer Bottom
Panel
Middle Fixed Shelf
Right Support
D
I
Quan
tity
of 1
Quantity
of 1
Drawer Back
Panel
Foot

Dandridge TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
Assembly Tool Required
No. 2 Phillips Screwdriver
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 28
1/4” x 1” Allen Bolt
(2)
Quantity
of 4
.5mm x 12 mm
Screw For Back
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-6 -5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Quantity
of 6
Magnet
( )
(5)
(6)
(7)
(9)
(10)
Quantity
of 12
Quantity
of 4
Quant
ity
of 8
Quantity
of 4
Quantity
of 4
Allen Wrench
.5mm x 15 mm
Screw For Magnet
Metal Knob
(11)
5/ 2” x 18mm
Bolt For Metal Knob
Quantity
of 4
Bracket
Plastic Anchor
Quantity
of 4
(17)
(18)
Quantity
of 2
7mm x 8mm
Screw For Wall
Plastic Chain
Quantity
of 4
Quantity
of 2
Quantit
y
of 8
(4)
(8)
(12)
Metal Nut
/16” x 2mm
Bolt For Drawer
.5mm x 15 mm
Screw For Bracket
(1 ) (14) (15) (16)
Metal Pin
Quantity
of 1
Quantity
of 4
Quantity
of 4
Quantity
of 4
Cam Lock Bolt
Cam Lock

Dandridge TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page.
Step 2. Insert the Wood Dowels(1) into
predrilled holes in Left Middle
Panel(G) and Middle Fixed Shelf(I).
Step . Attach Left Middle Panel(G) to
the Bottom Panel(F) with Allen Bolt(2).
Then attach Middle Fixed Shelf(I) to
Left Middle Panel(G) with Allen Bolt(2)
Step 1. Insert the Wood Dowels(1)
into predrilled holes in Middle
Fixed Shelf(I) and Right Middle
Panel(H).
Step 2. Attach Right Middle Panel(H)
to Middle Fixed Shelf(I) with
Allen Bolt(2).
Figure
Figure
2
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 4
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 4
(2)
1/4” x 1” Allen Bolt
Quantity
of 4
(1 )
Allen Wrench
Quantity
of 1
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 4
(2)
1/4” x 1” Allen Bolt
Quantity
of 4
( )
Cam Lock Bolt
Quantity
of 2
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Left Fixed
Shelf(K) and Right Fixed Shelf(L).
Step 2. Attach Fixed Shelf(K,L) to
Middle Panel(G,H).
Step . Attach the Cam Lock Bolt( ) to
Bottom Panel(F).
Figure 1

Dandridge TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Left Support(M)
and Right Support(N).
Step 2. Attach Left Support(M) and
Right Support(N) to the Bottom
Panel(F) with Cam Lock(4), then
fasten them.
Figure
4
Figure
6
Step 1. Attach the Left Door(O) to the
Left Support(M) and Right
Door(P) to the Right Support(N).
Step 2. Attach Handle(5) to Doors(O,P)
with Bolt For Handle(6).
.5mm x 15mm
Screw For Magnet
(8)
Quantity
of 4
(1)
(
4
)
Cam Lock
8mm x 0 mm
Wood Dowel
Quantity
of 6
Quantity
of 2
Step 1. Attach the Cam Lock Bolt( ) to
Top Panel(Q).
Step 2. Attach the Magnet(7) to the
Top Panel(Q) with Screw For
Magnet(8), then fasten them.
Figure
5
(7)
Magnet
Quantity
of 2
(5)
(6)
Metal Knob
5/ 2” x 18mm
Bolt For Handle
Quantity
of 2
Quantity
of 2
( )
Cam Lock Bolt
Quantity
of 2

Dandridge TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Side
Supports(M,N) and Middle
Panels(G,H).
Step 2. Attach Top Panel(Q) to the Side
Supports(M,N) and Middle
Panels(G,H) with Allen Bolt(2)
and Cam Lock(4), then fasten them.
Figure
9
(
2
)
1/4” x 1” Allen Bolt
Quantity
of 4
(
9
)
.5mm x 12mm
Screw For Back
Quatity
of 6
Figure
8
Step 1. Attach the Back Panels(R,S,T)
as picture with Screw For Back(9).
(
1
)
Quantity
of 8
Step 4. Insert the Metal Pins(12) into
desirous holes of inner Middle
Panels(G,H).
Step 5. Put the Adjustable Shelf(U) on the
Metal Pins(12) in each section.
Figure
7
(12)
Metal Pin
Quantity
of 4
Cam Lock
8mm x 0 mm
Wood Dowel
(4)
Quantity
of 2

(
6
)
Metal Nut
Quantity
of 2
(
5
)
/16” x 2mm
Bolt For Drawer
Quantity
of 2
5/ 2” x 18 mm
Bolt For Metal Knob
Met
al Knob
(
10
)
Quantity
of 8
(
11
)
Quantity
of 8
Step 1. Place Drawer on Middle Panel(G,H).
Step 2. Insert Wood Dowels(1) into
predrilled holes Drawer Side
Panel(B,C).
Step 1. Insert Nut(10) into predrilled holes
on Drawer Face Panel(A).
Step 2. Attach the Drawer Side Panels(B,C)
to Drawer Face Panel(A) with Bolt for
Drawer(11) through outer predrilled
holes in
Drawer Side Panels(B,C).
Step . Put the Drawer Bottom Panel(D)
into inner grooves of Drawer Side
Panels(B,C) and Drawer Face Panel(A).
Step 4. Insert Nut(10) into predrilled holes
on Drawer Back Panel(E), then be
attach Drawer Back Panel(E) to end
side of Drawer Side Panels(B,C),
fasten with Bolts for Drawer(11).
Step 5. Attach Handle(5) to Drawer Face
Panel(A) with Bolt For Handle(6).
Figure 1
1
Figure
10
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 2
Dandridge TV/Media Stand
Assembly Instructions

Dandridge TV/Media Stand
Assembly Instructions
Figure 1
Figure 1
2
Step 1. Move this item to the fastened
wall Bracket(14) and tie in
both Bracket(14) with Plastic
Chain(18) as shown in diagram.
Step 1. Attach Bracket(14) to the
Back Panel(R,S) with Screw
For Bracket(15).
Step 2. Drill 1/4 pilot holes in near
proximity of the Bracket(14)
attached to the Back Panel(R,S)
and tap the Plastic Anchor(16)
into wall.
Step . Fasten Bracket(14) using
Screw For Wall(17) into the
Plastic Anchor(16).
(15)
(14)
Quantity
of 4
(16)
Plastic Anchor
Quantity
of 4
7mm x 8 mm
Screw For Wall
Bracket
.5mm x 15 mm
Screw For Bracket
(17)
Quantity
of 4
(18)
Plastic Chain
Quantity
of 2
Quantity
of 4

Customer Service 1
-
800
-
6
-
5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-6 -5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Style No
Parts Letter
Parts Description
Quantity Needed
Parts Replacement Form

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width
of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS8 4100TX
Dandridge TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 04/26/2012