SEI HE4009 User manual

Max Load:
Assembly Instructions
Console Table With Baskets
SEI ITEM NO HE4009
www.seidal.com
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[e-mail]
For assistance with assembly contact:

DOWN BACK PANEL FEET
G
RIGHT FACING PANEL
DOWN STAND PANEL
J
RIGHT DOOR
M
DOWN CROSS - PANELUP CROSS - PANEL
Quantity
of 2of 4
Quantity ON
H I
UP STAND PANEL LEFT DOOR
K
UP BACK PANEL
L
MIDDLE BACK PANEL
Please review all parts and hardware before disposing of any packaging.
Before beginning assembly, separate each type of screw. Carefully study
Call Customer Service if missing hardware. Do not return to store/retailer.
TOP PANEL
A
D
Using a screw that is too long will cause damage.
Parts List
Console Table With Baskets
ELEFT FACING PANEL
C
hardware with your unit.
B
BOTTOM PANEL F
the screw diagrams below. You may receive extra

parts.
Assembly Tool Required
No.2 Phillips Screwdriver
Do not return product to store, please call
manufacturer for assistance, questions or
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
KNOBS (12)
COTTON MAT
of 8
Quantity
SCREWS
(8)
HINGE
Quantity
of 2
(11)
CAM-BOLTS CAM-LOCKS
(6) (7)
(10) of 2
FEMALE MAGNETS
Quantity
of 2
Quantity
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
surface with rough or abrasive objects.
the finish. Avoid rubbing or scratching the
SCREWS
Quantity
of 7
SCREWS
(13)
of 12
Quantity
CAM-TOOL
of 4
Quantity
SCREWS
Quantity
of 26
(9)
of 24
Quantity
of 40
Quantity
S
Q
of 2
Quantity
P
(3) Quantity
of 24 (4)
SCREWS
(1)
SMALL MAGNETS
R
(5) Quantity
of 1
of 2
Quantity
(2)

Figure 2
G
C
Figure 1
N
Place the cam-bolts (3) into holes in
H
F
E
(4) D
(3)
ARROW
(4) (3)
cam-locks (4).
panel (E/F/H/G) and attach using
cross - panel (E/F) and facing panel (C/D).
Rotate the 12 cam-bolts (3) into holes in
ARROW (5)
bottom panel (B).
B
Console Table With Baskets
Assembly Instructions
Assembly Instructions:
surface like carpet or blanket.
assembling.
Wood may scratch easily. Be careful when
Unpack and lay parts on clean, padded
Rotate the 4 feet (N) into holes in

cross - panel (F) using 4 screws (1).
Attach the 2 small magnets (2) to down
Place the cam-bolts (3) into holes in
panel (C/D) and attach using
cam-locks (4).
Rotate the 6 cam-bolts (3) into holes in
top panel (A).
Figure 4
Figure 3
D
A
Place the cam-bolts (3) into holes in
bottom panel (B).
Rotate the 6 cam-bolts (3) into holes in
cam-locks (4).
panel (C/D) and attach using
B
D

right short support (S) to down cross -
Cover cam-locks (4) with cotton mats (12)
cross - panel (E) using 3 screws (13).
Attach knobs (7) to doors (I/J) using
Attach female magnets (10) to doors (I/J)
Figure 6
Figure 5
provided.
I J
screws (6).
using screws (9).
facing panel (C/D) using screws (9).
Attach hinges (8) to doors (I/J) and
S
Q
panel (F) using 4 screws (13).
Attach the left short support (R) and
R
Attach the long support (Q) to up

Figure 9
O
Figure 8
Insert wicker baskets.
Figure 7
P
K
L
M
Attach the back panel(K/L/M) using
screws (1).
frame (O) using 4 screws (11).
Attach the wicker bottom (P) to wicker

Missing or damaged hardware and/or parts will be replaced free
of charge. We do not sell parts. Southern Enterprises Inc.
will provide replacement parts for only those items purchased
within the last 9 months. If this product has not been
purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacement
merchandise. Parts will not be available for items arriving
fully assembled. Parts will be sent if available from SEI
Please indicate where you purchased this item:Store/Website/Catalog
Quantity Needed
Please indicate color/size/style number:
Phone Number
Parts LetterStyle No Parts Description
600 Freeport Pkwy, Ste: 200
Customer Service 1-800-633-5096
Coppell, TX 75019
[email protected]
Name
Address
City/State/Zip Code
PARTS REPLACEMENT FORM
SEI ITEM NO HE4009
Customer Information