SEI ST PIERRE BAKERS RACK KA076300TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
KA076 00TX
“ST PIERRE” BAKERS RACK
Assembly Instructions

A Upper Back Frame Quantity
of 1
B Bottom back Frame Quantity
of 1
C. Left Metal cross bar Quantity
of 2
D. Right Metal cross bar Quantity
of 2
E. Wire shelf Quantity
of 1
F. Bottom Frame Quantity
of 1
G．
．．
．Leg Quantity
of 2
H．Left side arm Quantity
of 1
J．
．．
．Right side arm Quantity
of 1
K．
．．
．Large wood panel Quantity
of 1
28”*15- /8”
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool equired
No.2 Phillips Screwdriver (Not Included)
“
ST PIERRE
”
BAKERS RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. crews shown in actual size. Using
a screw that is too long will cause damage. Before beginning assembly, separate each type of
screw. Carefully study the screw diagrams below .You may receive extra hardware with your
unit.

L. Middle wood panel Quantity
of 1
26” * 10”
M. Small wood panel Quantity
of 1
26.25”*6-7/8”
N. Wicker basket Quantity
of 2
O. Wicker bottom panel Quantity
of 2
1.Long Bolt Quantity
of 8
1/4” X 1-1/2”
2. Short Bolt Quantity
of 10
1/4” X 1/2”
3．
．．
．Wood screw Quantity
of 10
4．
．．
．Allen Wrench Quantity
of 1
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool equired
No.2 Phillips Screwdriver (Not Included)
“
ST PIERRE
”
BAKERS RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Screws shown in actual size.
Using a screw that is too long will cause damage. Before beginning assembly, separate each
type of screw. Carefully study the screw diagrams below. You may receive extra hardware
with your unit.

Figure 1
Assembly Instructions:
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page .
Insert 4pcs long bolt (1) through
holes on Bottom back frame (B) to
attach 4pcs Metal Cross bar
(C&D).
Insert 4pcs Short bolt (2) through
holes on Metal Cross bars (C&D)
to attach 2pcs Legs(G).
Insert 2pcs Short bolt (2) through
holes on Bottom Frame (F) to
attach 2pcs Legs(G)
Insert 2pcs Short bolt (2) through
holes on Wire shelf (E) to attach
2pcs Legs(G).
Figure 2
Please insert Upper back panel(A)
onto bottom back panel(B) and
then Insert 2pcs Short bolt (2)
through holes on back Frame(A)
to attach bottom back Frame(B).
Put the Large wood panel (K) onto
the Upper back Frame(A) &
Legs(G) and then insert 2pcs
wood screw( ) through holes on
back Frame(A) to attach Large
wood panel(K)
“
ST PIERRE
”
BAKERS RACK
Assembly Instructions

Figure 3
Insert 2pcs long bolt (1) through
holes on Upper Back Frame (A) to
attach the 2pcs Side arm (H & J)
by tightening the Long Bolt(1).
Then Insert 2pcs Long Bolt (1)
through holes on Legs (G) & Wood
panel (K) to attach the 2pcs Side
arm (H & J).
Figure 4
Put the Small wood panel(M) onto
the Upper back Frame(A) & Side
arms (H & J) and insert 4pcs wood
screw( ) through holes on back
Frame(A) & Side arms (H & J) to
attach small wood panel(M)
The same way to attach the
Middle wood panel(L) onto the
back Frame(A) & Side shelf(H & J)
“
ST PIERRE
”
BAKERS RACK
Assembly Instructions

Figure 5
Please put Basket Bottom Panels
(O) into Wicker Baskets (N) by
hands.
Figure 6
Then put the finished baskets
onto Bottom Frame(F).
“
ST PIERRE
”
BAKERS RACK
Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. eplacement, if available, will be honored within this
time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019