SEI HZ625400TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
HZ625400TX
EASEL/WALL MOUNT CRAFT
STORAGE RACK-MATT BLACK
Assembly Instructions

A．BackPanel Quantity
of 1
B. Left side Panel Quantity
of 1
C. Right Side Panel Quantity
of 1
D. Tube Quantity
of 4
E. Back left tube Quantity
of 1
F. Back right Tube Quantity
of 1
G. Cross bar Quantity
of 6
1．Bolt Quantity
of 18
1/4”*1”L
2.ShortBolt Quantity
of 4
1/4”*1/2”L
3.Spherical Regulator Quantity
of 2
4. Wood screw Quantity
of 4
4.0*32mm
5. Wallanchor Quantity
of 4
6.Allen Wrench Quantity
of 1
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Tool List: 1/4" drill bit, drill, tape measure and pencil.
EASEL/WALL MOUNT CRAFT STORAGE RACK-MATT BLACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra hardware with your unit.

Figure 1
Assembly Instructions: Unpack
and lay parts on clean, padded
surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Please insert 8pcs Bolts (1)
through holes on both side Panel
(B & C) to tighten 1pc Back panels
(A) & 3pcs Tube(D) by Allen
Wrench (6).
Figure 2
Please insert 2pcs Short Bolts (2)
through holes on Iron of both side
panel (B & C) to tighten both Back
Tube (E & F) by Allen Wrench (6).
Please insert 2pcs Bolts (1)
through holes on both Back Tube
(E & F) to tighten 1pc Tube(D) by
Allen Wrench (6).
EASEL/WALL MOUNT CRAFT STORAGE RACK-MATT BLACK
Assembly Instructions

Figure 3
Please insert 12pcs Spherical
Regulator (3) through holes on side
of both Side Panels (B & C) to
tighten 6pcs Cross bars (G) by
hands
Please mount at least one screw
into a wall stud.
Now your Craft rack is ready to
use
Figure 4
If you would like to handing on the
wall
Drill 2pcs 1/4” holes in wall 33”
apart and drill 2pcs 1/4” holes in
wall 13.75” apart.
Insert 4pcs wall anchors(5) into
holes in wall. Insert 4pcs wood
Screws(4) into Wall anchors(5).
Put the complete metal rack onto
Wood Screws(4)
Now your wall mount Craft rack
is ready to use
EASEL/WALL MOUNT CRAFT STORAGE RACK-MATT BLACK
Assembly Instructions

Customer Service 1-800-633-5096
[email protected]
Southern Enterprises Inc.
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation
to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI
Please contact Southern Enterprises at 800-633-5096 or in Dallas [phone]/ 9am – 4pm Mon-Fri
Central time if you have product issues with your purchase. Please ask for a customer service
representative for issues involving damages or replacement parts. Please ask for a technical assistance
representative for any issues with product assembly and product construction.
Please contact the retailer that you purchased from for returns.
We'd love to hear from you! Email us photos of our products in your home at [e-mail] and
we might feature it on our site or use it to model one of our inspirational photos.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No PartsLetter Parts Description Quantity Needed
HZ625400TX - Parts Replacement Form