SEI WS476300TX User manual

1
WS476300TX
Dryden 3pc Metallic Wall Mirror Set
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO#13744
Page 1

2
Tool List: Tape Measure, Drill, 3/16” Drill Bit, and Pencil.
Dryden 3pc Metallic Wall Mirror Set
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.
A
Quantity
of 2
Screw Dia 1/8”x1-1/4”L
1
3pc Metallic Wall Mirror Set
B
Quantity
of 3
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call customer service at 1-800-633-5096
for assistance, questions, or Parts.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 2

3
Dryden 3pc Metallic Wall Mirror Set
Assembly Instructions
Note: Drilled hole or plastic anchor not required when mounting to
stud, use screw only. We do not supply hardware for mounting on
concrete walls.
Check that you have all parts
indicated on the front page.
Find a desired location. Mark 3
location for screws on wall after
measuring the distances between
the 3 mirrors.
The large mirror’s screw must be
installed into a wall stud.
Drill two 3/16” holes in the
location on the wall. (Do not drill a
hole if you are hanging a mirror
on a wall stud.) Insert Wall
Anchors (A) where you drilled the
holes.
Using Phillips head screwdriver,
install Screw (B) into the wall stud
and Wall Anchors (A). Turn
Screws (B) until there is a gap of
3mm between the head of the
screw and the wall as shown.
Install the mirrors onto Screws
(B) and verify the 3pc Metallic
Wall Mirror Set is resting securely
on the mounting Screws (B).
Now your Dryden 3pc Metallic
Wall Mirror Set is ready to use.
Page 3
"
The hole
measurement
s
on the wall must match
with the hole
measurements on back of
the unit"

4
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90
days of your receipt of the product. Replacement, if available, will be honored within this time frame.Parts will not be available for
items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to
product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product
issues or email us at [email protected]. Please ask for customer service representative for issues involving damages or
replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4