SELF Electronics FLEX2 Series User manual

FLEX2

www.self-electronics.com
1
Specifications：
Series: FLEX2
Instruction Manual
Read these instructions completely and carefully.
ATTENTION
• Read the instruction carefully before installation，non-observance of this instruction may cause damage to the fixture or
hurt to human body. The installation must be carried out by a qualified electrician in accordance with local or national codes.
• Cut off the power supply before installation, maintenance or cleaning.
• Regularly check the light source , the LED power supply, the cord and other accessories. If any part is damaged, the
product should not be used.
• Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation.
• Do not leave any other open holes in an enclosure of wiring or electrical components.
• Keep this instruction manual handy for future use.
• The light source of these product are non-changeable light diodes(LED).
• Do not disassemble the product, as the light diode can cause damage to the eyes.
WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If
not qualified, do not attempt installation. Contact a qualified electrician.
WARNING - Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and
dimensions shown in the photographs and/or drawings.
WARNING - Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installation
of LED retrofit kit. Check for enclosed wiring and components.
WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
CAUTION - To reduce the risk of fire, do not install in a compartment smaller by L1 inches
by 15-3/4 inches by 15-3/4 inches.
AVERTISSEMENT - Afin d’éviter tout risques d’incendie, ne pas installer dans un compartiment plus
petit par L1 inch, par 15-3/4 inch, par 15-3/4 inch.
L1 see form①.
Use only with SELV power supply or Class 2 power supply (For USA market)
Dimensions: (mm/inches)
* X: The quantity of LEDs, will be multiples of seven.
Minimum mounting
space (L1xW1xH1)
Length
(L)
Width
(W)
Height
(H)
ta
Form ①
Model Rated
input
Power
(W)
5/16”(8) 1/16”(2.2)
FLEX2-FX-24V-12 24VDC 0.024 x X -4~95°F
(-20~35°C)
(L+1/2”) x9/16”x9/16”)
(L+12)x15x15mm
5/16”(8) 1/16”(2.2)
-4~95°F
(-20~35°C)
FLEX2-FX-24V-11 24VDC 0.071 x X (L+1/2”) x9/16”x9/16”)
(L+12)x15x15mm
Custom design
1-15/16” x X/7(50 x X/7)
Custom design
1-15/16” x X/7(50 x X/7)
L
W
H

www.self-electronics.com
2
Components(optional):
Mounting Channel Soft connector Input cableCover
0° magnetic mounting clip Hard connector Fix clip0° mounting clip
Install LED fixtures directly
1
2 3
LED POWER SUPPLY
use tool to press the
spring to fix the strip.
Press
Lock
peal off the double sided
adhesive tape of insert
part first
+
-
a
a
b
b

3
www.self-electronics.com
Install LED fixtures with mounting channel
1
2
3
Cover
End Cut
a
b

4
www.self-electronics.com
LED POWER SUPPLY
4
≥1”
≥1”
5
6
a
b

5
www.self-electronics.com
Wiring diagram
or
or
!The cutted strip can still be used.
or
Pay attention to the polarity when linking LED strips together

www.self-electronics.com
6
SELF Electronics Co.,Ltd.
No. 1345 JuXian Road, Ningbo Hi Tech Park, Ningbo, China 315103
20/09/2022
or
Pay attention to the polarity when linking LED strips together
!
R 1-3/8”(35mm)
R 1-3/8”(35mm)
R 9/16”(15mm)
R 9/16”(15mm)