
- 3 - 07/2023
2023, .
• Thank you for purchasing our SENCOR product; we hope you will be
satisfied with it.
• Before using this appliance, please familiarise yourself with the user
manual, even if you are already familiar with using similar types of
appliances. Use the appliance only as described in this user manual.
Keep the manual for future reference.
• For the duration of the legal rights regarding faulty performance or
warranty for quality, we recommend keeping the original packaging,
packaging materials, receipt, and proof of the seller'sliability or
warranty certificate. When transporting the appliance, we recommend
packaging it again in the original box provided by the manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE APPLIANCE
A1 Speed dial
A2 Switch to turn on/off
A3 TURBO button
A4 Motor unit
A5 Removable stick blender
attachment
A6 Chopper container lid with
hole for connecting the motor
unit
A7 500 ml chopper container
A8 Blade unit of the chopper
A9 800 ml mixing and whisking
container
A10 Attachment for preparing
mashed potatoes
A11 Adapter for connecting whisks
or milk frothing attachment
A12 Whisks
A13 Milk frothing attachment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE
• Before first use, remove the appliance and its accessories form the
packaging and remove all promotional labels and tags. Check that
neither the appliance nor any of its components is damaged.
• Thoroughly wash all removable food contact accessories with
warm water and neutral dishwashing detergent. Then rinse it with
clean water and let it dry freely or wipe it thoroughly dry with asoft
cloth. Clean the components equipped with the gear system (whisk
attachment end, chopper lid and top of the mashed potato attachment)
only with adamp cloth. Make sure that no water leaks inside these
components. When cleaning the stick blender attachment, do not
immerse the upper end, which attaches to the motor unit, in water.
• Wipe the motor unit with aslightly damp cloth and wipe dry.
Warning:
Take extra care when handling the graters and blade
unit of the stick blender and chopper to avoid cutting
yourself on the blade.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PURPOSE OF USE
Stick Blender
It is suitable for mixing soft ingredients andliquids. It is mainly used for
thepreparation of baby food, various types of cocktails, sauces, spreads, etc.
Chopper
It is suitable for chopping food such as meat, semi-hard andhard cheese,
raw fruit andvegetables, nuts, herbs, etc. Do not try to process too hard
food such as ice cubes, coffee beans, nutmeg, cocoa beans, etc.
Hand Mixer
It is suitable for preparing light batters or for whipping whipped cream, egg
whites and creams. Do not use for whipping thick doughs.
Attachment for Preparing Mashed Potatoes
It is suitable for the preparation of mashed potatoes, potato puree or puree
of soft fruits or cooked vegetables. Do not use it to crush hard or semi-hard
foods.
Milk Frothing Attachment
It is suitable for whipping hot or cold milk and milk substitutes for further
use, e.g. for making cappuccino or hot chocolate. Do not use it to whip
creams, etc.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASSEMBLING AND DISASSEMBLING
Before you start assembling or disassembling the appliance, make sure
that the power unit is turned off, disconnected from the power socket
andthat the rotating parts are not inmotion. Parts that attach to themotor
unit must be dry andclean!
Stick Blender
1. Attach the stick blender attachment from below to themotor unit.
Aclick indicates that both parts are connected.
2. Mix the food in thesupplied container or other suitable container,
which is intended for contact withfood.
3. When disassembling, press andhold the buttons on the sides while
removing the stick blender attachment from themotor unit.
4. When using the stick blender toblend food in thepot, always remove
the pot from the hob first.
5. The food you put in the supplied container should not be boiling or too
hot to avoid damaging the container. It is recommended to allow the
food to cool down to about 50 to 60°C before using the stick blender.
Chopper
1. Install the blade unit on the centre pin on the bottom of the container.
2. Fit the lid of the chopper container so that the shaft of the blade unit
fits into the centre section in the lid and the safety locks on the sides of
the lid fit into the safety system of the container. Turn the lid clockwise
until it stops. This secures the lid.
3. Place the motor unit in the hole in the lid and push it down slightly
until you hear aclick. Now the chopper is assembled.
4. To remove, press and hold the buttons on the sides of the motor unit
while pulling the motor unit upwards. Proceed in the opposite way to
assembling the chopper.
Warning:
When handling the blade unit, take extra care not to
cut yourself on the blade.
Hand Mixer
1. Insert the whisks into the holes in the adapter until they click into
place. Before use, always make sure that the brooms are properly
attached.
2. Attach the whisk adapter to the motor unit from below. The
attachment is signalled by aclick.
3. Whisk food in the supplied container or other suitable food contact
container.
4. To remove, press and hold the buttons on the sides of the motor unit
while pulling the motor unit upwards. Next, proceed in the opposite
way to assembling the hand mixer.
Attachment for Preparing Mashed Potatoes
1. Attach the attachment for preparing mashed potatoes to the motor unit
from the bottom. The attachment is signalled by aclick.
2. Rotate the bottom of the attachment to set the desired structure of the
mashed potatoes.
3. To remove, press and hold the buttons on the sides of the motor unit
while pulling the motor unit upwards.
Milk Frothing Attachment
1. Insert the end of the milk frothing attachment into the hole in the
adapter.
2. Attach the adapter with the attachment to the motor unit from below.
The attachment is signalled by aclick.
EN Stick Blender
User Manual