6
Warnings and instructions below appear throughout the manual and shall be diligently complied with:
•Shut the gas valve for turning the broiler off and unplug before any service,
maintenance or cleaning work to be done.
•Wait for the broiler to cool down completely before carrying out any service, maintenance
or cleaning. Failure to do so may cause body injuries.
•Procedures in this manual may contain references to use of chemical products. Senoven does not endorse
the use of any particular cleaning / degreasing agent. Make sure to use chemicals that are approved for use
in kitchen.
•The broiler should be grounded in accordance with the local electricity codes in order to avoid
risk of electricity shock. These fuses are protected by electric circuit breakers. Separate electricity
lines require a grounding plug.
•All electrical connections should comply with local electricity codes and other applicable
regulations.
•Operate the machine in an adequately ventilated place. Make sure to leave lateral safety
clearances in order to avoid the emergence of a fire safety risk. In case of emergency, follow the
directives for shutting down.
• Do not attempt to turn on the device in case of power cut.
WARNING: Danger of electrical shock. Failure to comply with these instructions may lead to serious
injuries or even death:
_ Device needs to be grounded.
_ If you have doubts about the proper operation of the device, check with a qualified electrician.
_ In order to avoid the risk of serious injury or death on the control box, do not use water in its proximity.
WARNING: Hot surfaces and high temperatures. Failure to follow these procedures may lead to serious
injury:
_ Make sure to have cooled down the device in accordance with the instructions in this manual
before carrying out any cleaning or maintenance work.
Responsibilities of Vendors
In general, the responsibilities of the vendors are as written below:
To verify that electricity and gas service are applied under conditions required by the manufacturer and to
check whether the connections are in conformity with the manufacturer’s requirements.
To take the broiler out of its package as described in instructions for use and operation, install the broiler
and place it appropriately.
To verify that electricity and gas connections are made by a qualified person. To make sure that the
connections are implemented in accordance with the applicable provincial / regional / country standards.
IMPORTANT NOTE
Broiler cleanness and overall maintenance status are the key factors that affect the broiler
performance. All operations that are to be carried out without applying the instructions in this manual
may lead to breakdown of machine parts, thereby exclusion thereof from guarantee coverage, or to
injuries or even to death. Therefore, please read the instructions in the manual carefully, understand
them and remember that this manual will guide you on the proper use of this product.
