Sensative Strips Drip User manual

Magnet
1
3
2
15sec
4
Mounting plate
Moisture pads
www.sensative.com/drip
video tutorials
Put your gateway into add mode Remove magnet (see 1 short LED blink)
1 long LED blink means success Hold in hand and look for status change
in your gateway

5
INS 11 02 010 /2 R3
7
6
8
Remove the protective tape from the mounting
plate and place trips Drip firmly on the surface
Remove the protective tape from trips
Drip adhesive Mount trips Drip on the marked " trips side" of the
mounting plate
Place trips Drip
so that the
moisture
detection pads
will soak any
leaking water

SENSATIVE STRIPS DRIP ILLUSTRATIONS MANUAL
Colors used:
PANTONE 285C - Blue, background rst spread
PANTONE 2718C - Light Blue, Box background for QR code
CMYK - All other details
Black
Coating on all surfaces: Matte UV Coating