Sense SE-300-GM-6 User manual
The SE-300-GM series are wide-range condenser microphones with a cardioid polar pattern, optimal for
training rooms, conference rooms, government municipalities, and paging applications.
•Cardioid polar pattern
•3P XLR (Male) connector insert
•Shockmount and Desktop Bases available (not
included) for sound isolation and other features.
•Foam Windscreen (included)
•Powered by phantom power
•RF filtering prevents interference from wireless
devices
•Small, sleek gooseneck permits flexible
positioning
•High sensitivity allows for quality sound pick-up
under dicult conditions.
•Plug the XLR connector directly into the base
(not included).
Overview
Features
•Aim the gooseneck to the desired angle for pick-
ing up sound.
•Slip on the windscreen over the microphone head
to control breaths and popping noises.
Speaking
Level
•To avoid feedback and reverberations using more
than 2 microphones in the same environment,
keep the second mic at least 3 times the distance
from the closest speaker to the microphone.
Installation Tips & Guidelines
The 3:1 Rule
The 3:1 rule should be used as a guideline for the
minimum amount of space between microphones.
The minimum space between each microphone
should be no less than 3 times the distance from
the sound source to the microphone.
1
3
Inverse Square Law
The inverse-square law states that when the
distance from the speaker to the microphone
is doubled, the microphone pickup is reduced
by 1/4. This should be taken into account when
choosing the microphone placement, especially
when in areas with a high level of ambient noise.
Quick Start Guide
Gooseneck Condenser Microphone
SE-300-GM-6, SE-300-GM-12, SE-300-GM-18
Type Condenser
Frequency Response 80 ~ 18,000 Hz
Polar Pattern Cardioid
Output Connector 3 pin XLR Male
Sensitivity (at 1,000 Hz) -58dB (1.25mV)
Power 12-52VDC Phantom
Impedance 220Ω± 30%
Max. SPL for 1% T.H.D. 125 dB
Dimensions SE-GM-300-GM6-C SE-GM-300-GM12-C SE-GM-300-GM18-C
A 0.51”
B 2.04”
C 6” 12” 18”
D 11.93” 17.95” 23.94”
Specifications
Warranty
Technical Information
Measurements
A
B C
D
Frequency Response Polar Pattern
1-Year Limited Warranty
This Sense™ Product has a One-Year Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products that have been abused, modied, or disassembled. Products to be repaired under this warranty
must be returned to SnapAV or a designated service center with prior notication and an assigned return authorization
number (RA).
1
year
Rev: 140804-1500
This manual suits for next models
2
Table of contents
Other Sense Microphone manuals
