
Senses Akustik I Installation manual IDuo +
Assembly Guide - Important Information
This assembly guide is specifically for the right-hand opening door of the
Kolo Duo+ unit without furniture.
1.
2.
3. Exercise caution during assembly and ensure that the installation site is
protected to prevent any injuries or damage to the product or its
surroundings.
4.
5. Ensure that you have all the required tools & parts listed from page
03 to 07 before starting the assembly process.
6.
7.
8.
The packaged Kolo Duo+ unit weighs 724 kg and requires a team of 4-5
individuals for installation. On average, the installation process takes
approximately 60 to 100 minutes
Position and assemble the Kolo Duo+ unit as close as possible to its final
placement. If needed, the fully assembled unit can be repositioned by
retracting the four levelling feet and moving it using the bottom rollers.
However, it is crucial not to push the unit against the direction of the
rollers to prevent tipping or damage.
We recommend leaving at least 30 cm of space between the wall or between
multiple units of the Kolo Duo+ to ensure adequate clearance.
Ensure that the power source for the Kolo Duo+ can safely handle a load of 10
amps. When the ventilation is active, the LED light is at its full illumination,
and the power charging station is not in use, the wattage usage is 24W. To
prevent overloading, the power cord fuse is set at 7 amps.
The Kolo Duo+ unit is equipped with 2 AC power outlets and 2 USB charging
outlets. Please refrain from connecting any electronic devices that require
more than 5 amps.