Sensidyne Gilian 5000 User manual

Operation of the Gilian 5000

Power Up/Ready Mode

Taking a Sample

Key Pad Lock-out

Setting the Flow Rate

Displayed Flow Calibration

Calibration Set Up

Low Flow Sampling
•Set Flow Rate at 1500
cc/min
•Attach adapter with
arrow pointing toward
the pump
•Can be attached in-line
or fixed mount
•Use holder with needle
valve for constant
pressure/multi-flow
sampling

Calibration Using Low Flow

Gilian 5000 Programmability
•Start-Stop Programmable
through Set/Cal key
•Up to four events of varying
duration
•Can also program a duty
cycle for extended time
sampling
•Can also activate and
deactivate certain functions
like auto re-start and instant
start.

Programming
•The Program Mode is accessed by pressing the set/Cal
key three times.
•A program is activated by pressing the up arrow to
display a “1”
•To create a new program press Enter, and enter values
for the following parameters
•1) A delayed start
•2) Up to four run times of various duration
•3) Up to four delay-run times to determine holds between
runs
•4) Number of cycles

Options
•Options are accessed by pressing the Set/Cal key four
times to display OPT
•Three Options may be activated by pressing the UP
arrow to display a “1”
•1) Disable auto re-start
•2) Enable auto lock
•3) Enable auto start (by-passes the Ready mode)