Sensitech VizComm F5 User manual
Sensitech Inc. •800 Cummings Center, Suite 258X •Beverly, MA 01915 •1-800-843-8367 •+1-978-927-7033 •Fax 978-921-2112 •c[email protected]
© 2017 Sensitech Inc. All Rights Reserved.
sensitech.com
@sensitech
VizComm™F5
Activation Guide
T83006676 Rev. A • 14 Jul 2017
VizComm™F5 Bundle Activation Guide
Activating the VizComm F5
1. Locate the loose red/black lead from the battery.
2. Locate the loose red/black lead from the Tracking device.
3. Match the orientation of the connectors and attach. If device does not turn on automatically, follow instructions on
back to power on.
4. Tuck leads into case and then close case (make sure leads are not being pinched when closing).
Turning On the VizComm F5
1. Power on by lightly pressing the crosshairs button (A) for 5 seconds, then releasing.
2. LED Lights (B) will be solid GREEN for 4 seconds then will ash indicating the device is powered up.
Turning Off the VizComm F5
1. Power off by pressing the crosshairs button for 4 seconds.
2. LED lights will ash RED. Release button as device powers off (3-5 seconds.)
Check Status
Tap the crosshairs button to check cell signal strength (C) and battery (D).
If the LED lights display do not blink, the device is off.
GREEN — >90% battery left
AMBER — 50-90% battery left
RED — < 50% battery left
1 2
A
B
3
4
C D
Table of contents
Other Sensitech GPS manuals
