SENSSUN iF1917B User manual

18iF-010E R0
Bluetooth Body Fat Scale
Instructions for Use
iF1917B
ISO 9001 CERTIFIED BY SGS
Manufacturer: Zhongshan Camry Electronic Co., Ltd.
Address: Baishawan Industrial Park, Qiwan Road(N),
East District, Zhongshan City, Guangdong Province
Postal Code: 528403
Tel: [phone]
Fax: [phone]
Email: [e-mail]
The product picture is indicative only.
Appearance specifications please in kind prevail.
iF the device transfer from the lowest or highest storage environment, to
environment with 20℃, it takes at least two hours to recover to normal
working mode.
iF the ME EQUIPMENT is not likely to be used for some time，please
remove the battery.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Under electromagnestic encironment, reset, collaspe and incorrect
measurement are allowed.

Senssun Life
1 2
1. Battery Installation 3. Registering and Connecting
4. Start Weighing
2. Download and set up the Application
Open the battery cover on the back of scale, then install
the batteries properly according to the pictures shown
below. If the batteries have been already installed, put
out the insulating strip.
2x1.5V AAA Battery or 4x1.5V
AAA Battery. Please install battery
according to polarity.
Note：After battery installation,please close the battery
cover. Please use corresponding battery. Please remove
battery if it is not used for a long time(more than three
months).
Search“SenssunLife”in“App Store” or “Google Play” to
download the Application.
Or in another most convenient way by scanning the QR
code below.
Note about the compatibility:
Online version in App Store for IOS system
Android 4.3 or above
Tips:：APP is keeping updating, so it may differ from
showed on manual. For the final and accurate information,
please check on APP.
Open APP SenssunLife, connect the device with APP
and submit your personal profile.(Before connection,
please make sure Bluetooth is turned on and scale LCD
is lighted up)
Note：Please make sure your setted personal information
is correct,in order to get accurate measurements.
The LCD is lighted up
Step gently to
turn on the scale
Connect the
scale with APP
Place the scale on hard and flat floor. Stand on the
scale with bare feet. The weight reading is stable
and flashes,then begins to be transmitted. The scale
shuts off after several seconds. APP will show and
save all indexs and history record.
Place the scale
on hard and
flat floor.
Keep your bare feet
on the electrodes of
scale.
Check the
measurement
data on APP.
Note:To make a proper measurement of body fat,
please keep your bare feet on the electrodes of scale.
SenssunLife

Advise for use & care
1. Do not use the scale in humid, overheat environment.
(Temperature range from 5℃to 40℃. )
2. Stand on the scale steadily and touch the electrodes on
the platform with your bare feet. Tip over will lead to a fall
when you step on the edge of one side of the scale.
3. Do not drop, shock or strike the scale as it is a precise
instrument.
4. Keep the scale clean. Do not use acid cleaning agent.
5. Do not use the scale on the place with intense shake.
Keep standing firmly on scale when in use.
6. To ensure the accuracy of the data, it is recommended
that each measurement be carried out at the same time
of day.
7. When the battery runs out, please remove the battery
in time to prevent leakage of the battery lead scale body
corrosion;
8. Pregnant women, those with symptom of edema and
on dialysis treatment are not suggested to use the device.
Those who use heart pacemaker or with other implanted
medical device are forbidden for the device.
11. Please stop using this product if the bottom case is
broken.
About the body fat scale
The product is a smart body fat scale with a high-
precision strain gauge sensor, which can help you to
store and keep track of your weight on smart phone.
This scale can transmit your weight data to your smart
phone via Bluetooth technology, as well as make
graph of your weight results, from which you are able
to keep track of the trend anytime. Download the App
on your phone to use Bluetooth scale, you will start
your first step of weight control.
USER-FRIENDLY TIPS
1. The Fat% Hydration% content evaluated by the Fat Monitor
Scale is only for reference (not for medical purpose). If your
Fat% Hydration% content is over/below normal level, please
consult your doctor for more advice.
2. Keep away from strong electro-magnetic field when using
the scale.
3. Don't use the scale on the damp floor, neither could stand
on the edge to one side of the scale, otherwise it may tip!
10~100100~250cm
SET
7. Warning indications
5. Buttons fuction & Personal
parameters setting
6. Weight unit setting
Fat Measuring
Fat measurement is in process,
please don't step off the scale,
and make sure your bare feet is
touching with the electrodes.
Low Fat% Indication
The Fat% is too low. Please
lead a morenutritional diet
and take good care of yourself.
High Fat% Indication
The Fat% is too high. Please
watch your diet and do more
exercise.
Over-load Indication
The weighing subject on the
platform exceeds the maximum
capability of scale.Please step
off to avoid damage.
Calibration
Error exists, please re-test
to get the correct result.
Low Battery Indication
The battery power is
running low, please replace
with a new battery.
Turn on the scale and prompt to next
parameter.
Value up by each interval press.
Press and hold the button to have
consecutive value added.
Value down by each interval press.
Press and hold the button to have
consecutive value reduced
Note：
1. If the model has no button,please set personal
parameters on APP.
2.The buttons are only for visitors and the default
user code is 0. You can’t set user code on scale,
APP will distribute one code automatically.
Please set personal parameters on APP.
Male/
Female
Parameters can be set in the following range:
Gender Height Age
Please set weight unit on APP or press UNIT button
on back of the scale to convert unit.
3 4

FAQ
The software can't obtain weighing results from Bluetooth
scale.
●Please confirm the connection sign on the App interface
to know the connection status.
●Confirm the Bluetooth is on in your device and the bluetooth
scale is on within the valid range of signal coverage.
●Check whether the battery power is running low, please
replace with a new battery.
●Relaunch the application.
●Turn off the Blueooth and on again, then bridge the Bluetooth
connection between scale and smart phone again.
Fail to connect to your device
●Please make sure only one device is setting up connection
with the Bluetooth scale.
●Please make sure your device is equipped with Bluetooth 4.0
or above.
LCD has no response
●Please first check the batteries and replace them if necessary
●Repairs may only be carried out by our autherized custormer
service or dealers.
56
TLSR8261