Sentier Vetcorder AirMate User manual

1. Alarm Pause Button
2. Main Interface Button
3. Menu Button
4. Battery Indicator
5. Patient ID Number
6. Display Screen
Vetcorder AirMate Quick Start Guide
1
2
3
4
5
6
1
2
3
4
1. Power Button
2. Pause Button
3. USB Charging Port
4. Vent
A
B
C
Connect Luer to Luer Sample
Tubing (A) to the Moisture Filter
(B) and connect the Moisture
Filter to the AirMate (C) by
pushing in and turning
clockwise.

1. Current CO2 waveform display
2. CO2 parameter with HI/LO alarm setting
3. RR parameter with HI/LO alarm setting
1. Press Menu button to get to CO2 Setup
2. Touch to right of Alarm to select
“Mid/High”
3. Set your parameters. Uplimit should
always be greater than Downlimit
Alarm
level
Visual prompt
High
Alarm lamp flashes in
red with 2 Hz.
Medium
Alarm lamp flashes in
yellow with 0.5 Hz.
Low
Alarm lamp lights in
yellow without flashing.
Sentier HC, LLC
161 W. Sunset Drive, Suite 102
Waukesha, WI 53189
[phone]
www.SentierConnect.com
[e-mail]
1
2
3