Seville Classics 20226 User manual

ASSEMBLY INSTRUCTIONS
24” x 24” Pegboard Set (Model No.20226)
(24” x 24”, Pegboard Size)
(48” W x 8.75” D x 24” H, with Bins)

Parts List
Please check the parts carefully according to the parts list. If you are missing any parts,
please contact our customer service department (please refer to page 5 of 5).
(pg.2of5)
(
#9
)
PEGBOARDx2PCS
(
#10
)
PLASTICANCHORx8PCS
(
#11
)
SCREWx8PCS
(
#12
)
SPACERx8PCS


Parts List
Please check the parts carefully according to the parts list. If you are missing any parts,
please contact our customer service department (please refer to page 5 of 5).
(pg.3of5)
 
(
#32
)
BINHOOKx6PCS
(
#33
)
BINx6PCS


8
#11
#9
#12
DetailedBackViewofPegboard
Step 1:
Peel and Stick the Spacers (#12) (top protective
layer must be peeled off to expose the adhesive)
onto the BACK of the pegboards where the Screws
(#11) will attach to the wall. See image below.
Step 2:
Place the pegboard at desired location on the wall
and mark the locations to drill holes. Each pegboard
needs 4 pcs. of Screws (#11) and Plastic Anchors
(#10). Install ONE pegboard at a time to assure
level. Repeat steps for the NEXT pegboard to place
next to the first one or at desired location.
(pg.4of5)
OptionalExpandedPegboard

(pg.5of5)
*If you are missing any parts, have any questions or need additional assistance with
assembly, please contact our bilingual (English & Spanish) Customer Service
Department at:
***Please visit our website or call and inquire about our additional UltraHD Line***
Model No. 20206
UltraHD Workbench
Model No. 20242
UltraHD Rolling Workbench 
Model No. 16234
UltraHD Rolling Cabinet 
Model No. 20209
UltraHD Wall Cabinet 
Model No. 20205
UltraHD Rolling Drawer Cabinet 