Seville Classics UltraHD UltraGuard 20204 User manual

Reference page 12 for special
care and maintenance of
stainless steel
ASSEMBLY INSTRUCTIONS
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
SC200318
28 in. W x 18 in. D x 34.5 in. H
(71.1 cm x 45.7 cm x 87.6 cm)
Granite Graphite Red

1

Large Drawer
Small Drawer
2

(#7) BOTTOM PANEL x 1 PC (#8) RIGHT BACK CORNER PROTECTOR x 1 PC
(#5) RIGHT PANEL x 1 PC (#6) FRONT FRAME x 1 PC
(#1) SOLID HARDWOOD TOP x 1 PC (#2) UPPER BACK PANEL x 1 PC
(#3) BOTTOM BACK PANEL x 1 PC (#4) LEFT PANEL x 1 PC
3
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department (please see page 13.)

(#15) SCREW B (M4 x 8) x 134 PCS (#16) SCREW C (M4 x 18) x 16 PCS
(#13) SWIVEL WHEEL W/O BRAKE x 2 PCS (#14) SCREW A (M4 x 10) x 51 PCS
(#11) BUMPER x 4 PCS (#12) SWIVEL WHEEL WITH BRAKE x 2 PCS
(#9) LEFT BACK CORNER PROTECTOR x 1 PC (#10) PUSH BAR x 1 PC
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department (please see page 13.)
4

(#19-3) LARGE DRAWER LEFT PANEL x 1 PC (#19-4) LARGE DRAWER RIGHT PANEL x 1 PC
(#19-5) LARGE DRAWER BACK PANEL x 1 PC (#20-1) SMALL DRAWER FRONT PANEL x 5 PCS
(#19-1) LARGE DRAWER FRONT PANEL x 1 PC (#19-2) DRAWER BASE PANEL x 6 PCS
(#17) SCREW D (M8 x 18) x 16 PCS (#18) DRAWER MAT x 6 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department (please see page 13.)
5

(#22) DRAWER KEY x 2 PCS
(#20-5) SMALL DRAWER BACK PANEL x 5 PCS (#21) SCREWDRIVER x 1 PC
(#20-3) SMALL DRAWER LEFT PANEL x 5 PCS (#20-4) SMALL DRAWER RIGHT PANEL x 5 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department (please see page 13.)
6

TIP:
Step 2.
Step 3.
Step 4.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
Install the Left Panel (#4)
Remove 2 pcs Sliderstocreate the space needed to
use the screwdriver (#21). Then, attach the Left
Panel (#4) to the Front Frame (#6) and the Solid
Hardwood Top (#1). Make sure the “Top” of the
Left Panel (#4) is onthe Solid Hardwood Top (#1)
and the screw holes are lined up to the Front Frame
(#6). Use Screwdriver (#21) and 6 pcs Screw A (#14)
to tighten theLeft Panel (#4) to theFront Frame
(#6), and then to Solid Hardwood Top (#1).
Re-install the removed 2 pcs Sliders to the
Left Panel (#4).
Remove 2pcs Slides to create the
space needed to use the Screwdriver
(#21).
A magnetic screwdriver is included for your
convenience. If using a powered driver, keep
torque setting on LOW.
Open the package, and put the parts aside.
Leave the Solid Hardwood Top (#1) on
cardboard during assembly to reduce the
chance of scratching the top.
Install Front Frame (#6)
Locate theFront Frame (#6) and attach to the
"Front" of the Solid Hardwood Top (#1), using 3pcs.
Screw A (#14) and Screwdriver (#21) to tighten.
Make sure that the top and sides of the Front Frame
are flush with the Solid Hardwood Top (#1) –
The screw holes have some tolerance, and aligning
now may save time by preventing adjustments later.
Back
7
Front
Front
Back
Front
Back
Front
Back
*NOTE: We recommend using TWO people to assemble the cabinet.
Note:
Step 1.

Step 5.
Note:
Step 6.
Step 7.
A.Attach theUpper Back Panel (#2) between
the Left Panel (#4) and Right Panel (#5).
Make sure the “Top” oftheUpper Back Panel
(#2) isontheSolid Hardwood Top (#1) asthe
sticker indicates. Line up the screw holes and
use Screw A (#14) to tighten up theUpper Back
Panel to theSolid Hardwood Top (#1), Left
Panel (#4) and Right Panel (#5).
B. Attach Bottom Back Panel (#3) between the
Left Panel (#4) and Right Panel (#5).
Make sure the “Top” of the Bottom Back Panel
(#3) is to the Upper Back Panel (#2) as the
sticker indicates. Line up the screw holes and
use Screw A (#14) to tighten the Bottom Back
Panel (#3) to the Upper Back Panel (#2), Left
Panel (#4) and Right Panel (#5).
Install the Bottom Panel (#7)
Attach the Bottom Panel (#7) to the Left Panel
(#4), Right Panel (#5), Front Frame (#6),
Bottom Back Panel (#3), line up screw holes
and use 7 pcs Screw A (#14) to tighten.
Remove 2 pcs Sliders to create the space
needed to use thescrewdriver (#21).
Then, attach theRight Panel (#5) to Front Frame
(#6) andSolid Hardwood Top (#1).Make sure
the“Top” oftheLeft Panel (#4) is on the
Solid Hardwood Top (#1) and thescrew holes
are aligned to theFront Frame (#6).
Use Screwdriver (#21) and 6pcs Screw A(#14)
to tighten theRight Panel (#5) theFront Frame
(#6) andSolid Hardwood Top (#1).
Re-install the removed 2 pcs Slidersto the
Right Panel (#5).
Install the Upper Back Panel (#2) and Bottom
Back Panel (#3).
Install the Right Panel (#5).
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
8
*NOTE: We recommend using TWO people to assemble the cabinet.

Step 8.
Step 9.
Note: After finishing this step, turn the cabinet over and
onto the wheels.
Step 10.
Install Wheels (#12 and #13).
Attach Wheels (#12 and #13) to theBottom
Panel (#7) andsurrounding frame.
Make sure the Swivel Wheels with Brake are
installed at the front side.
Use ScrewsD (#17) to tighten.
Install Bumpers (#11).
Attach Bumpers (#11) to thebottom four
corners of the cabinet. Use ScrewsC(#16)
to tighten them.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
9
*NOTE: We recommend using TWO people to assemble the cabinet.
Install Right Back Corner Protector (#8)
and Left Back Corner Protector (#9)
Attach Right Back Corner Protector (#8) to the
top of right back side, and attach Left Back
Corner Protector to the top of left side, using
10 pcs Screws A (#14) to tighten.

Step 11.
Step 12.
Step 13.
Step 14. Assemble and Install Small Drawers the same way.
RepeatSteps 11-13 using Small Drawer Left Panel
(#20-3), Small Drawer Right Panel (#20-4), Small
Drawer Front Panel (#20-1), Small Drawer Back
Panel (#20-5) andDrawer Base Panel (#19-2) to
assemble the Small Drawer. Once assembled, you
should have five Small Drawers.
Install Large Drawer Side Panels (#19-3 and #19-4).
Attach Large Drawer Side Panels (#19-3 and#19-4)
one at a time, into theback ofthestainless steel
Large Drawer Front (#19-1).
Make sure the Drawer Side Panels areinserted all
the way, making contact with the rear of the Large
Drawer Front Panel (#19-1).
Line upthescrew holes and use ScrewsB(#15) to
tighten them.
Install Large Drawer Base Panel (#19-2)
From above, fit andattach Large Drawer Base Panel
(#19-2) between thetwosides and into theback of
the Large Drawer Front Panel (#19-1).
Use ScrewsB (#15) to tighten.
Note: Do not fully tighten anyonescrew until all
screws arepartially screwed in.
Install Large Drawer Back Panel (#19-5).
Attach the Large Drawer Back Panel (#19-5) to the
rest ofthe assembled drawer. Use ScrewsB (#15) to
tighten. Once you have theLarge Drawer
assembled, repeat Steps 11-13 to assemble the
other five Small Drawers. Once completed, you
should have one Large Drawer andfive Small
Drawers.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
10
*NOTE: We recommend using TWO people to assemble the cabinet.

WARNING: Please check thekey/lock, it must unlocked
before placing all the drawers.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
11
*NOTE: We recommend using TWO people to assemble the cabinet.
Step 15: Install Drawers into Cabinet
A. Pull out both slides for large drawer.
Hook the big drawer between both slides,
make sure the slides hooks are insert into the
square holes on the drawer side panels
completely.
B. Line up the screw holes, and using 4 pcs
Screw B (#15) to tighten the drawer.
C. Repeat above steps to place other drawers.

Step 16. Place Drawer Mat (#18) into Drawers
Step 17.
After inserting all Drawer Mats(#18),
close all the drawers.
Install Pus Bar (#10).
Attach Push Bar (#10) to the top of
cabinet, using 8 pcs Screw A (#14) to
tighten.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
UltraHD® Stainless Steel Care Instructions
The stainless-steel parts of this product are protected with an UltraGuard™ fingerprint resistant finish.
DO NOT use traditional stainless-steel cleaners. To safely manage unwanted fingerprints and prevent new
stains, perfom the following steps once monthly:
• Lightly wipe with warm water and clean microfiber cloth
• Always wipe in the direction of the surface grain (NEVER ACROSS)
• Wipe away excess water with dry clean cloth
UltraHD® Wood Top Care Instructions
Our tops are made with real wood, and while great care is taken to ensure
consistent top color and graining, there may be natural variations
between finished products. We hand select the wood for every top to
ensure the material is undamaged and naturally beautiful. If the wood top
is received with excessive damage or splitting, Seville Classics will
guarantee replacement of the top. Variations of color, and minor
scratches in the clear clat finish will not be reason for replacement.
Restore Shallow Scratches or Chips
The wood surface of this product is finished with a polyurethane coat.
If the wood top becomes chipped or scratched, a polyurethane coat can
be reapplied to restore a smooth texture and protect from future damage.
• Please follow the manufacturer's instruction on the product for
application.
12
*NOTE: We recommend using TWO people to assemble the cabinet.

CONTACT INFORMATION
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our bilingual
(English and Spanish) customer service department at:
Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: [email protected]
Website & Online Store: www.sevilleclassics.com
***Please visit our website or call and inquire about our additional UltraHD Line***
2
13
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite)
Model No. 20143 (Graphite)
Model No. 20153 (Red)
Model No. 20133 (White)
Model No. 16238 (Granite)
Model No. 20148 (Graphite)
Model No. 20158 (Red)
UltraHD® Line

UltraHD® Line
UltraHD® Wall Cabinet with Open Shelf
UltraHD® Lighted Workcenter
UltraHD® 2-Door Rolling Workbench
UltraHD® 4-Drawer Rolling Cabinet
Model No. 20205 (Granite)
Model No. 20230 (Granite)
Model No. 20140 (Graphite)
Model No. 20150 (Red)
Model No. 20262 (Granite)
Model No. 20142 (Graphite)
Model No. 20152 (Red)
Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Rolling Trash Bin
Model No. 20215
UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20292 (Granite)