Seville Classics UltraHD UltraGuard WEB346 User manual

Mounts on top of UHD16236, UHD20143 UltaHD Tall Cabinet
Granite Graphite
SC200318
ASSEMBLY INSTRUCTIONS
UltraHD® Cabinet Stacker
(Model No. WEB346, WEB640)
36in. W x 18in. D x 18.5in. H
(91.4cm x 45.7cm x 46.9cm H)
Granite Graphite
Reference page 10 for special care
and maintenance of stainless steel

#55
#1
#41
#54
#42
1

(#3) Top Panel x 1 PC
(#4) Bottom Panel x 1 PC
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 11.)
(#1) Left Panel x 1 PC
(#2) Right Panel x 1 PC
(#60) Mounting Strap x 2 PCS
(#6) Left Door x 1 PC
(#7) Right Door x 1 PC
(#8-A) Back Panel x 1 PC
2

(#19-A) Right Back Bottom Corner Protection x 1 PC
(#20-A) Left Back Bottom Corner Protection x 1 PC
(#21) Screw Driver x 1 PC
(#22) KEY x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 11.)
(#17-A) Left Front Bottom Corner Protection x 1 PC
(#18-A) Right Front Bottom Corner Protection x 1 PC
(#14) Corner Protection A x 2 PCS
(#15) Corner Protection B x 2 PCS
3

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 11.)
(#23) Magnet x 2 PCS
(#42) Screw G (M4 x 30L) x 6 PCS
(#54) Screw N (M4 x 10L) x 26 PCS
(#61) Screw O (M4 x 12L) x 2 PCS
(#27-B) WASHER (M8)x 2 PCS
(#27) WASHER (M4) x 2 PCS
(#55) Screw M (M6 x 50L) x 2 PCS
(#41) Screw F (M4 x 8L) x 46 PCS
(#55-A) Wall Anchor x 2 PCS
M8X20 pcs
4

Step 1:
Step 2:
Step 3:
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
TIP: A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep on a low
torque setting.
Install Right Panel (#2) to the Top Panel (#3)
Place the Right Panel (#2) on the ground vertically.
Make sure the front of the panel faces downward.
Place the Top Panel (#3) next to the Right Panel (#2).
Line up the screw holes, use 3 pcs of Screw F (#41)
to tighten.
Install Bottom Panel (#4).
Attach the Bottom Panel (#4) to the Left and Right
Side Panels (#1 and #2). Make sure the front of the
panel faces downward. Use 6 pcs Screws G (#42) to
assemble the panels.
Install Left Panel (#1)
Place the Top Panel (#3) and Left Panel (#1)
vertically. Line up the screw holes, use 3 pcs of
Screw F (#41) to tighten.
5
Back
Front
Back
Front
Front
Note: Assemble on top of cardboard to reduce chance
of scratches or damage during assembly.

Step 4:
Step 5:
Step 6: Install Left Door (#6)
Attach the Left Door (#6) to the Left Panel (#1).
Use 3 pcs Screw F (#41) to tighten the Door
Panel.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame.
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Place the Back Panel (#8-A) onto both Left and
Right Side Panels (#1 and # 2) and Top and
Bottom Panel (#3 and 4). Use the 10 pcs of
Screw F (#41) to tighten.
Install Magnet (#23)
Use 4 pcs of Screw F (#41) to install the Magnet
(#23) on the Top Panel (#3) and the Bottom
Panel (#4).
Install Back Panel (#8-A).
6

Step 7:
Step 8:
Note
Step 9:
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Attach the Right Door (#7) to the Right Panel
(#2). Use 3 pcs Screw F (#41) to tighten the
Door Panel.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted
and centered in the door frame.
Install Right Door (#7)
Remove the top Corner Protection brackets
from Model No. 16236 /20143B Tall Cabinet
as the left photo shows.
Use 20 pcs of Screws F (#41) to install the
Corner Protection A and B (#14 and #15) onto
the top of the cabinet.
Fully tighten the screws after all the corner
protections are attached.
Install the Corner Protection A&B (#14&15)
7

Step 10:
Step 11:
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Remove the 6 corner screws from the top
back panel of 16236.
Attach Cabinet Stacker Model No. WEB346
A. Place Cabinet Stacker Model No. WEB346 /
WEB640 on top of 16236 / 20143B.
B. Attach the Left Front Bottom Corner Protection
(#17-A), Right Front Bottom Corner Protection
(#18-A), Right Back Bottom Corner Protection
(#19-A), Left Back Bottom Corner Protection (#20-
A) on the bottom of the cabinet, use 26 pcs of
Screw N (#54) to tighten.
8

Step 12:
Repeat steps A through D to install the
other mounting strap.
Warning: To prevent possible tipping, it is suggested
that the Mounting Straps be installed. For safety,
secure the mounting straps to wood studs whenever
possible.
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Install Mounting Strap (#60)
A. Remove 1 pc Screw F (#41) from the back
corner protection.
B. Attach the Mounting Strap (#60) to the
back Corner Protection brackets as the left
photo shows using Screw O (#61) and
Washer (#27).
C. Drill a hole in the wall with a 5/16" drill
bit, insert the Wall Anchor (#55-A) into the
hole.
D. Attach the other end of the Mounting
Strap (#60) to the wall using Screw M (#55)
and Washer (#27-B).
9

Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional
stainless steel cleaners on this unit. Lightly wipe off once a month with clean warm
water and a soft cloth (preferably a micro fiber cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or
grease marks. Remember to always wipe in the direction of the surface grain (NEVER
ACROSS) and always use a lint-free cloth. Once the surface is clean,thoroughly wipe
dry with a soft absorbent cloth.
UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
10

Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: [e-mail]
Website & Online Store: www.sevilleclassics.com
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite) Model No. 16238 (Granite)
Model No. 20143 (Graphite) Model No. 20148 (Graphite)
Model No. 20153 (Red) Model No. 20158 (Red)
Model No. 20133 (White)
***Please visit our website or call and inquire about our additional UltraHD Line***
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
UltraHD® Line
11

UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite) Model No. 20292 (Granite)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Trash Bin UltraHD® Lighted Workcenter
Model No. 20215 Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line