Seville Classics 18595 User manual

Step 6:
Insert the Wire Basket (D) into the
Sliders (E).
Step 7:
Repeat steps 5 and 6 to install the next
Wire Basket (D).
Step 8:
For the next two shelves, fasten a pair of
Slip Sleeves (B) around the grooves of
each pole. Slide the Wire Shelf (C) over
the top of the 4 poles until it rests snugly
over the slip sleeves.
Total Weight Capacity with Casters:
500 lbs/ 226.7 kg
Wire shelf with leveling feet:
250 lb / 113.3 kg
Wire Basket: 50 lbs/ 22.6 kg
TF160420
STORAGE ORGANIZER WITH PULL OUT BINS
Model No. 18595
ASSEMBLY INSTRUCTIONS
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Please read and save these instructions
©2016 Seville Classics, Inc.

Please make sure you have all the parts before assembly.
A
8 pcs
B
21 pairs
C
3 pcs
D
2 pcs
Poles
Slip Sleeves
Wire Shelves
Wire Baskets
E
4 pcs
F
2 pairs
G
4 pcs
Sliders
Wheels
Leveling Feet
locking wheel
Step 1:
Screw the top and bottom Poles (A)
together.
Step 2:
Screw the Wheels (F) or Leveling Feet
(G) into the bottom of each Pole (A).
Step 3:
Starting at the bottom, fasten a pair of Slip
Sleeves (B) around the grooves of each
pole. If necessary, move the sleeves slightly
up or down until they snap into position.
Step 4:
Slide a Wire Shelf (C) over the top of the 4
poles until it rests snugly over the slip
sleeves.
Tip: If necessary, use a rubber mallet to
further secure the shelf.
Step 5:
Fasten another pair of Slip Sleeves (B) at
desired height of basket. Place the Sliders
(E) over the top of the 2 poles until it rests
snugly over the sleeves.