Seville Classics UltraHD UltraGuard 16234 User manual

TR151014
ASSEMBLY INSTRUCTIONS
Storage Cabinet (Model No. 16234)
36in.W X 18in. D X 72in. H
(91.4cm x 45.7cm x 1.83m)
Reference page 9 for special care and
maintenance of stainless steel

(pg 1 of 9)

(#7) RIGHT DOOR x 1 PC
(#8) UPPER BACK PANEL x 1 PC
PARTS LIST (pg 2 of 9)
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department. (please refer to page 9 of 9) .
(#3) TOP PANEL x 1 PC
(#4) BOTTOM PANEL x 1 PC
(#1) LEFT PANEL x 1 PC
(#2) RIGHT PANEL x 1 PC
(#5) MIDDLE SHELF x 3 PCS
(#6) LEFT DOOR x 1 PC

(#14) BUMPER x 4 PCS
(#15) CORNER PROTECTION - A x 2 PCS
PARTS LIST (pg 3 of 9)
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department. (please refer to page 9 of 9) .
(#12) WHEEL W/O BRAKE x 2 PCS
(#16) CORNER PROTECTION - B x 2 PCS
(#9) MIDDLE BACK PANEL x 2 PCS
(#10) BOTTOM BACK PANEL x 1 PC
(#11) WHEEL WITH BRAKE x 2 PCS
(#13) HOOK x 12 PCS

(#17) SCREW A (M8x18L) x 16 PCS
(#18) SCREW B (M4x18L) x 16 PCS
(#20) SCREW D (M4X30) x 6 PCS
(#23) MAGNETx 2 PCS
PARTS LIST (pg 4 of 9)
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department. (please refer to page 9 of 9) .
(#19) SCREW C (M4x8L) x 80 PCS
(#21) SCREW DRIVER x 1 PC
(#22) KEY x 2 PCS

TIP:
Step 1:
Step 2:
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used,
keep on a low torque setting.
Place the Bottom Panel (#4), front of the panel face
downward, attach with the Left and Right Side Panels
(#1 and #2). Use 6 pcs of Screws D (#20) to install.
*Note: Before tightening the screws, make sure the
bottom corners of the Left and Right Side Panels (#1
and #2) are completely flushed with the back and front
corners of the Bottom Panel (#4).
ASSEMBLY INSTRUCTIONS (pg 5 of 9)
Storage Cabinet (Model No. 16234)
*NOTE: Recommend using 2 persons to assemble Storage Cabinet.
Install Bottom Panel (#4).
Install Left and Right Side Panel (#1 and #2) to the Top
Panel (#3).
Place the Right Panel (#2) on the ground vertically.
Make sure the front of the panel faces downward.
Place the Top Panel (#3) next to the Left Panel (#1).
Line up the screw holes, insert and tighten 3 pcs of
Screws C (#19) using Screw Driver (#21). Install the
Right Panel (#2) the same way.
Note: The screw holes have some tolerance –small
adjustments may be needed during assembly.

Step 3:
Step 4:
Note:
Install the Wheels with Brake (#11) onto the left side of
the cabinet and screw the Wheels W/O Brake (#12)
onto the right side of the cabinet. Use Screws A (#17)
and Screw Driver (#21) to install.
Make sure the Wheels with Brake (#11) are in LOCKED
position and stand the cabinet upright after installing
the four wheels.
c. Use 7 pcs of Screws C (#19) to install the Upper Back
Panel (#8) the same way.
ASSEMBLY INSTRUCTIONS (pg 6 of 9)
Storage Cabinet (Model No. 16234)
Install the Back Panels (#8, #9 and #10).
a. Use 7 pcs of Screws C (#19) to install the Bottom
Back Panel (#10) onto both Left and Right Side Panels
(#1 and #2) and Bottom Panel (#4).
Install the Wheels (#11 and #12).
b. Install both Middle Back Panels (#9) above Bottom
Back Panel (#10) the same way. Place the groove of the
Middle Back Panel (#9) onto the top edge of the
Bottom Back Panel (#10) and use 8 pcs of Screws C
(#19) to install.

Step 5:
Note:
Step 6:
a. Decide the height for the each Middle Shelf (#5)
and place the Hooks (#13) into the hook slot and
push down.
Each Middle Shelf (#5) needs a hook at the four
corners to support it. Place Hooks (#13) at the four
corners and make sure they are at the same height.
Use 4 pcs of Screws C (#19) to install the Middle
Magnet (#23) on the Top Panel (#3) and the Bottom
Panel (#4).
ASSEMBLY INSTRUCTIONS (pg 7 of 9)
Storage Cabinet (Model No. 16234)
Install the Middle Shelves (#5).
Install the Middle Magnet (#23).
b. Place each Middle Shelf (#5) into cabinet and push
down onto the Hooks (#13).

Step 7:
Step 8:
Step 9:
a. Use 16 pcs of Screws B (#18) to install the 4 Bumpers
(#14) onto the four corners of the Bottom Panel (#4).
b. Install the Right Door (#7) the same way.
Storage Cabinet (Model No. 16234)
ASSEMBLY INSTRUCTIONS (pg 8 of 9)
Install the Left and Right Doors (#6 and #7).
Note: There is a difference in shape of the Corner
Protection (#15) for the left front and right back and the
Corner Protection (#16) for right front and left back.
Move the cabinet to desirable place and use Key (#22)
to lock the doors.
a. Attach the Left Door (#6) to the unit using 10 pcs of
Screws C (#19) to tighten it.
Install the Bumpers (#14) and Corner Protection (#15
and #16).
b. Use 20 pcs of Screws C (#19) to install the Corner
Protection (#15 and #16) onto the top of the cabinet.
Note: The screw holes on the door hinge have tolerance,
enabling the door to be adjusted and centered in the
door frame.

Stainless Steel Maintenance:
CONTACT INFORMATION (pg 9 of 9)
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Seville Classics, Inc.
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional
stainless steel cleaners on this unit. Lightly wipe off once a month with clean warm
water and a soft cloth (preferably a micro fiber cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or
grease marks. Remember to always wipe in the direction of the surface grain
(NEVER ACROSS) and always use a lint-free cloth. Once the surface is
clean,thoroughly wipe dry with a soft absorbent cloth.
*If you are missing any parts, have any questions, or need additional assistance in assembly,
please contact our bilingual (English/Spanish) customer service department at:
19401 South Harborgate Way
Torrance, CA 90501
Fax: [phone]
E-mail: [email protected]
Website & Online Store: www.sevilleclassics.com
USA

Model No. 16238
UltraHD Mega Cabinet
Model No. 16236
UltraHD Storage Cabinet
Model No. 20238
UltraHD Rolling Cabinet
UltraHD Line
Model No. 20204
UltraHD 6- Drawer Rolling Cabinet

Model No. 20215
UltraHD Trash Bin
Model No. 20255
UltraHD Tool Box
Model No. 20262
UltraHD Rolling Workbench
Model No. 20267
UltraHD Workcenter
UltraHD Line
Model No. 20206
UltraHD Workbench
Model No. 20230
UltraHD Wall Cabinet