Seville Classics WEB241 User manual

10-DRAWER ORGANIZER CART
Model No. WEB241
ASSEMBLY INSTRUCTIONS
Tel [phone]
Fax [phone]
Monday through Friday 8:30AM-4:30PM (Pacific Time)
Seville Classics Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Please read and save these instructions
©2016 Seville Classics, Inc.
©
www.S eville Cl as si cs .com
LOADING CAPACITY
PER DRAWER: 1.5kgs/3.3lbs
TOP TRAY: 4.5kgs/10lbs
TOTAL UNIT LOADING: 19.5kgs/43lbs
TF160119

Step 2:
Step 3:
Step 4:
With Spacers (L) in between Cross Bars (B)
and Side Supports (A), use Screws (E) to
secure with Hex Wrench (K).
Prepare each Drawer (C) by screwing in
the Drawer Pulls(F).
Please make sure you have all the parts before assembling.
Step 1:
Find the Side Support (A) and make sure
the curve is on top. The grooves for the
drawer should face each other.
Place the Caster Sleeves (J) into the
bottom holes of Side Support (A). Push
them in as far as you can. Attach the Caster
(H) and Locking Caster (I) into the Caster
Sleeves (J). Push them in until they click
into place.
2 pcs 4 pcs 10 pcs 1 pc
Side Supports Cross Bars Drawers Top Tray
8 pcs 10 pcs 10 pcs 2 pcs
Cross Bar Screws Drawer Pulls Drawer Pulls Screws Casters
2 pcs 4 pcs 1 pc
Locking Casters Caster Sleeves Hex Wrench
AB C D
E F G H
IJK L
Insert each Drawers (C) and place the
Top Tray (D) on top of the cart.
8 pcs
Spacers
L
L