Sgeyr DK201 User manual

USER Manual
Digital To Analogue Audio Converter
Model: DK201
Table of Contents
1. Introduction
2. Specifications
3. Package Contents
4. Panel Descriptions
1. Introduction
The Digital to Analog Converter is designed for either home or professional audio
application. It converts Toslink/SPDIF or Coaxial digital audio signal analog L/R
&3.5mm audio; it can support an external device such as amplifier via standard
RCA-style L/R jacks, and a stereo headphone via its 3.5mm jack at the same time.
This small converter is plug and play.
1) Converts SPDIF Optical or coaxial digital PCM audio input to analog stereo L/R
RCA and 3.5mm headphone outputs simultaneously.
2) Supported sample tates including 32 KHZ,44.1KHZ and 192 KHZ, up to 24-bit
resolution.
3) Ultra low jitter and high fidelity design using new receiver & D/A converter chips.
4) Auto sensing input selection with priority given to SPDIF; disable/disconnect
SPDIF input for coaxial input application.
2. Specifications
1) Input ports:1xToslink/SPDIF, 1xCoaxial
2) Output ports: 2xRCA(L/R), 1x3.5mm phone jack
3) Sampling Rate: 32KHZ, 44.1KHZ, 48KHZ, 96KHZ and 192KHZ
4) Dimensions(mm): 72(D)x55(W)x20(H)
5) Weight(g): 40g
3.Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main Unit(Digital to Analog Audio Converter)
2) Power supply:USB cable
3) User Manual

4. Panel Descriptions
Please study the panel drawings below and become familiar with signal input(s),
output(s) and power requirements.