SGS WD2000 User manual

FOR YOUR SAFETY
PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN THEM FOR FUTURE USE.
OWNER’S MANUAL
WD2000 & WD4000
WHEEL DOLLIES

PAGE 2
SPECIFICATION
TOOL MODEL WD2000 / WD4000
LIFTING CAPACITY PER SKATE 450 KG
MAXIMUM TYPE WIDTH 360 MM
WEIGHT 18 KG
SAFETY GUIDELINES
WARNING! Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this equipment.
Familiarise yourself with this product’s application and limitations, as well as the
specific warnings below relating to their use.
Ensure the Wheel Dollies are in sound condition and good working order. take ac-
tion for immediate repair or replacement of damaged parts.
Use genuine parts only. The use of improper parts may be dangerous and will invali-
date the warranty.
Wheel Dollies should only be used in suitable, well lit areas.
Wheel Dollies must be used in pairs at either the front or rear of the vehicle. They
must never be used diagonally.
Keep general area clean and tidy and free from obstructions.
Use Wheel Dollies on level and solid ground, preferably concrete. Do not attempt
use on rough or uneven ground.
Maintain the Wheel Dollies in good condition.
Wnsure there are no passengers in the vehicle.
WWW.SGS-ENGINEERING.COM

PAGE 3
OPERATING INSTRUCTIONS
Ensure there are no passengers in the vehicle.
Ensure the Wheel Dollies are free to move and that there are no obstructions in the
area of use.
When not in use store Wheel Dolies in a safe, dry, childproof area.
DO NOT start or drive the vehicle whilst it is raised on wheel dollies.
DO NOT allow untrained persons to operate the Wheel Dollies.
DO NOT leave the vehicle unattended whilst it is raised on the Wheel Dollies.
DO NOT operate the Wheel Dollies when you are tired or under the influence of
alcohol, drugs or intoxicating medication.
DO NOT get the Wheel Dollies wet or use in damp or wet locations or areas where
there is condensation.
DO NOT exceed the rated capacity of the Wheel Dollies. remember that the front of
a vehicle is usually heavier than the rear.
DO NOT use the Wheel Dollies to support a vehicle in order to work underneath it.
Maintain correct balance and footing when moving vehicle. ensure the floor is not
slippery and wear non-slip shoes. Ensure all non-essential persons keep a safe dis-
tance whilst the Wheel Dollies are in use.
IMPORTANT - We recommend that at least 2 persons are involved in manoeuvring
the vehicle when supported on wheel dollies. the vehicle’s weight provides a large
amount of inertia which has to be overcome to get the vehicle moving and more
importantly, stopped.
WARNING! The warnings, cautions and instructions covered in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are factors which cannot be built into this product,
but must be applied by the operator

EC Declaration of Conformity
This is an important document and should be retained
MANUFACTURER’S NAME:
TYPE OF EQUIPMENT:
PART NUMBER:
I, the undersigned, hereby declare that the equipment specied above
conforms to the above European Communities Directive(s) and
Standard(s).
PLACE:
DATE: (Signature)
Robert Wyatt
Company Secretary
Derby, UK
24th JUNE 2017
SGS Engineering (UK) Ltd
SGS Engineering (UK) Ltd
West Side Park
Raynesway
Derby, DE21 7AZ
Wheel Dolly
WD2000
2006/42/EC Machinery Directive (MD)
APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD: