Shanling A600 User manual

MONAURAL POWER AMPLIFIER
A600
MONAURAL POWER AMPLIFIER A600
on standby
/

1.
3.
7.
6.
5.
4.
8.
2.
10cm 20cm
9. 2000m
1
10.
2
1.
2.
12
3.
1
A600

1. XLR/RCA
2. RCA
3. XLR
4.
5.
6.
7. ( )
8.
2
1.
2.
3.
A600
MONAURAL POWER AMPLIFIER A600
on standby/
1
2
3
USEONLY WITH A 250V FUSEUSEONLY WITH A 250V FUSE
~/220V 50Hz~/220V 50Hz
POWER
/AC IN
XLR
INPUT
RCAXLR
RCA
1
3
2
1. COMMON
2. HOT ()
3. COLD () 208W
A600
SPEAKER
ON/
OFF/
FUSE 100V - 120V : T15AL
220V - 240V : T10AL
IR IN
SERIAL NO.:
1
2
3
4
5
7
8
6

3
A600
/
"RCA" "XLR"
"XLR"
"RCA"
5
/
1.
[ON/ ]
[on/standby] [POWER]
3
2. [on/
standby] [POWER]
[OFF/ ]
3.
D600/P600/T600
"/"
1.
2. A600
3.
A600
A600
A600
4. A600
A600
A600 A600
A600 A600

4
A600
4.2V/10K (XLR) 2
450W/8 800W/4
DC - 50KHz (-0.5dB)
.1V/10K (RCA)
1000W/2
0.005%
110dB
208W
0.5W
(x x ) 300 x 470 x 496mm
62kg
:1
3.5mm : 1
: 1
: 1

5
A600
MONAURAL POWER AMPLIFIER
Dear customer
Thank you for buying monaural power
amplifier. We would like to take this
opportunity to express our sincere
appreciation to you. We recommend you to
read this user's manual carefully before
operating the unit and keep it available for
reference when needed.
Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
Do not open this unit for repair or
modification by anyone other than a
qualified technician! This product has no
user-serviceable parts. Opening the unit
and modifying the internal circuitry can
make subsequent maintenance difficult or
impossible and affect performance and
sound quality.
For good ventilation, a minimum of 10cm
clearance shall be maintained at the back
and two sides and 20cm at the top of the
unit.
Allow no water dripping or splashing into
the unit. Place no object containing liquid
on the unit, e.g. Vase.
Do not cover any ventilation hole with
newspaper, cloth, curtain, etc. in case of
ventilation blocking.
Allow no exposed flame source on the unit,
e.g. burning candle.
The unit shall be connected to AC power
output socket with grounding protection.
If power plug and appliance coupler are
used as disconnecting device, the
disconnecting device shall be easily
operable.
The waste battery must be treated
according to relevant local battery wasting
regulations.
CAUTION
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
DO NOT OPENDO NOT OPEN
Caution: Risk of electric shock. DO NOT OPEN.
The sign with arrowed lightning inside an equilateral
triangle warns the user that the unit has high voltages
inside which can cause electric shock.
The sign with an exclamation mark inside an
equilateral triangle warns the user that the unit has
important operation and maintenance instructions.
Safety Precautions
Operation Precautions
9. Only applicable for safe use in the
area with elevation under 2000m.
See Fig. 1 for the sign.
10.
Fig. 1
Only applicable for safe use under
non-tropical climate conditions.
See Fig. 2 for the sign. Fig. 2
1.
2.
3.
Before Turning on
About Condensation
If a great temperature difference exists
between the unit interior and the
environment, humidity may condense on
the internal parts and the unit will not
function normally. If this happens, please
disconnect power and wait for one or two
hours until the temperature difference
almost completely disappears.
Moving the Unit
Please turn it off and disconnect it from
power socket. Then disconnect all cables
connecting with other system devices
before moving the unit.
Please check again the accuracy of all
connections cables.

6
MONAURAL POWER AMPLIFIER A600
on standby/
1
2
3
USEONLY WITH A 250V FUSEUSEONLY WITH A 250V FUSE
~/220V 50Hz~/220V 50Hz
POWER
/AC IN
XLR
INPUT
RCAXLR
RCA
1
3
2
1. COMMON
2. HOT ()
3. COLD () 208W
A600
SPEAKER
ON/
OFF/
FUSE 100V - 120V : T15AL
220V - 240V : T10AL
IR IN
SERIAL NO.:
1
2
3
4
5
7
8
6
A600
MONAURAL POWER AMPLIFIER
Parts Identification
1. Level indicator window
2. Remote control receiving window
3. Standby switch key
1. XLR/RCA input switch
2. RCA audio signal input interface
3. XLR audio signal input interface
4. Speaker positive terminal
5. Speaker negative terminal
6. Remote control signal input interface
7. AC power input socket (with fuse)
8. Main power switch

7
A600
MONAURAL POWER AMPLIFIER
Operation Instructions
Turn on/off
1. First connect the unit power line and
signal line. Locate the power switch on
the rear panel at the position [ON], and
the power indicator on the panel turns
red. At this time, press [on/standby]
key or [POWER] key on the remote
controller, and the indicator turns green
and blinks. After about 3 seconds, the
unit enters normal working status.
2. To turn off this unit, first press [on/
standby] key on the panel or [POWER]
key on the remote controller, and then
locate the power switch on the rear
panel at the position [OFF]. At this time,
the unit is in off status.""
3. If the unit is not to be used for some
time, it should be unplugged to
disconnect it from AC power.
Input Switching
Push the switch on the rear panel to switch
between RCA and XLR audio signal inputs.
Push up to enter XLR input and down for
RCA input.
When the output of the unit is overloaded,
the power indicator on the panel turns red
and blinks. At this time, turn off the unit
power and eliminate the overload causes.
After about 5 minutes, turn on the unit
again to make it work properly.
Output Protection
Remote Controller
The unit may share a remote controller with
Shanling D600/P600/T600 to control the
standby on/off . However, it will not be
included in the accompanying accessories. If
you need it, please purchase one.
""
Connection
Schematic Diagram of Connection
Since the unit is a monaural power
amplifier, two units together work as a
stereo amplifier system.
Place two A600 units, one on the right
and one on the left of the pre amplifier.
Connect the left and right channel
signals outputted from the pre amplifier
respectively to two A600 input signal
interfaces, the left channel signal to the
left A600 and the right channel signal to
the right A600.
Connect the speaker terminal of the left
A600 to the left channel speaker, and
the speaker terminal of the right A600
to the right channel speaker.
1.
2.
3.
4.
Left channel
speaker
Left channel
A600
Pre amplifier
Right channel
A600
Right channel
speaker
Connect to left channel speaker
Connect to left channel A600
input signal interface
Connect to right channel A600
input signal interface
Connect to right channel speaker

8
A600
MONAURAL POWER AMPLIFIER
Technical Specifications
Accompanying Accessories
Power cord w/3-prong plug: 1
3.5mm double channel earphone connection line:1
User's manual: 1 copy
Warranty card: 1
Technical
parameters
General
parameters
Power consumption: 208W
Standby power consumption: <0.5W
Dimension (W x D x H): 300 x 470 x 496(mm)
Net weight: about 62kg
Input sensitivity: 4.2V/10K (XLR), 2.1V/10K (RCA)
Max. output power: 450W/8 , 800W/4 , 1000W/2
Frequency response: DC - 50KHz ( - 0.5dB)
Distortion: <0.005%
Signal noise ratio: >110dB

:
: 0755-26887659
Email:shanling @szonline.net
http: www.shanling.com//
:10
Due to continuous improvement, every specification and design is
subject to change at any time without further notice.