Shark Navigator NV60 User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
WHAT’S INSIDE EMPTYING THE DUST CUP
MAINTENANCE
QUICK START GUIDE
Empty the dust cup after each use.
clean
Cleaning the Brushroll
1 Detach the pod from
the floor nozzle.
2 Remove any blockages or buildup
from the airways in the nozzle.
3 With scissors, carefully cut
away any fibers, hair, or string
wrapped around the brushroll.
Avoid damaging or cutting the
bristles on the brushroll.
Post-Motor
Filter
Foam
Felt
A
B
G
F
1 2
4 5 6
3
(Click)
(Click)
(Screw)
(Click)
(Click)
(Click) (Click)
SWIVELPRO
AVacuum Pod
BMotorized Floor Nozzle
CHandle Assembly
DFlexible Hose
EExtension Wand
FDusting Brush
G5.5” Crevice Tool
C
D
E
Wash foam and felt filters
every 3 months and the
post-motor filter once a year
to keep the suction strong.
Rinse filters with water
only and allow them to
air-dry completely before
reinstalling. Tap loose dirt
from filters as needed
between washes.

2 WAYS TO CLEAN
FLOOR CLEANING
ABOVE-FLOOR CLEANING
For questions or to register your product, visit us online at sharkclean.com
OR
SETTING I
For cleaning bare floors or
with accessories
SETTING II
For carpet cleaning
with brushroll
Attach desired
cleaning accessories
to hose or wand.
For additional parts and accessories, visit sharkaccessories.com
OR
To clean above-floor areas, detach the
flexible hose from the top of the extension
wand. Or for more reach, detach the
extension wand from the floor nozzle hose.
1
1 2
2 3
Step on floor nozzle and tilt handle back.
Press the Power/Surface switch at the top of
the vacuum body to select the appropriate
surface setting.
NV60_QSG_MP_REV_Mv7
©2019 SharkNinja Operating LLC.