Shark NV642 User manual

A
D
C
B
NV642
®
©2016 SharkNinja Operating LLC. SHARK, ROTATO R, and LIF T-AWAY are registered trademarks of SharkNinja Operating LLC.
DU ST-AWAY and JOIN THE CLEAN EVOLUTION are trademarks of SharkNinja Operating LLC.
E
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum’s great features.
Join The
Clean Evolution.
™
When it comes to cleaning, we’re not
afraid to get our hands dirty. At Shark®,
we’re constantly working to evolve and
innovate products to meet the needs of
people like you. Because our job is to
make 5-star-worthy products that make
your life a whole lot easier.
For questions or to register your product, contact us at:
800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
NV642_160615
WHAT’S INSIDE:
A Vacuum Pod
B Motorized Floor Nozzle
C Handle & Hose
D Wand
E Crevice Tool
F Dusting Brush
G D u s t - A w a y ™
Hard Floor Attachment
with Microfiber Pad
H Wide Upholstery Tool
For additional parts and accessories, visit sharkclean.com
H
F G
Please be sure to read the enclosed Owner’s Guide prior to using your unit.

Empty dust cup after each use
MAINTENANCE
EmptyRelease
Easy brushroll access: just pop open the garage
Push the release buttons and the brushroll garage door will pop open. Lift out the
brushroll to easily remove any string, hair, or debris that may be wrapped around it.
TIP:
Wash filters
every 3 months
to keep the
suction strong.
Rinse filters and
allow to air-dry
completely. Tap
loose dirt from foam
filters as needed
between washes.
Brushroll
Access
Brushroll
Access
Brushroll
Access
Brushroll
Access
PULL
OR
Handle
Release
Wand
Release
Lift-Away
Release
2 WAYS TO CLEAN:
1
UPRIGHT
2
LIFT-AWAY®
Power
Push the POWER
button to turn the
vacuum on or off.
Brushroll
ON (green light)
for carpets
OFF (no light)
for bare floors
HAVING
TROUBLE?
ISSUE
Vacuum is not picking
up debris. No suction
or light suction.
Solution
Empty dust cup, clean
filters, check all openings
for blockages, and
clean brushroll.
ISSUE
Vacuum lifts area rugs.
Solution
Press the BRUSHROLL
button to turn off the
brushroll. Adjust
Suction Control
on handle to minimize suction.
ISSUE
Brushroll does not spin.
The Brushroll Indicator
Light is red.
Solution
Turn off and unplug the
vacuum. Remove any
blockages, then reconnect
and turn vacuum back on.
Press the BRUSHROLL
button to turn on
the brushroll.
Attach any of the
specialized cleaning
accessories to the
handle or wand.
ASSEMBLE
Assemble vacuum
Attach onboard
accessories
5
(Snap)
6
(Snap)
3
(Click)
4
(Click)
1
(Click)
2
(Click)
Suction
Control