Shark Rotator User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
AVacuum Pod
BMotorized Floor Nozzle
CHandle & Hose
DWand
ECrevice Tool
FUpholstery Tool
WHAT’S INSIDE TIPS
MAINTENANCE
NV680_QSG_180223
QUICK START GUIDE
Empty the dust cup after each use.
Brushroll access
TIP:
Wash filters every
3 months.
Rinse filters with water
only and allow them
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Note: The foam filters
may discolor over time.
This is normal.
POWERED
LIF T-AWAY
®
SPEED
A
D
C
E F
Slide hose clip
into back of wand
for convenience.
To store your vacuum, wrap
cord around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
For additional parts and accessories,
visit sharkaccessories.com
Attach onboard
accessories
(Connect)
OR
Locks
(Click)
(Click)
(Click)
B
(Click)

2 WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
Power
Push the Power button to
turn the vacuum on or o.
Floor Setting
Slide the Floor Selector up or
down to choose floor type.
Lift-Away
Release
Press release
button to lift
pod o nozzle.
OR
Handle
Release
Wand
Release
Wand Release
Attach accessories
to handle or wand.
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
©2018 SharkNinja Operating LLC.
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.