DEAR SHARP CUSTOMER
Thank
you
for
your
purchase
of
the Sharp
Liquid
Crystal Television. To ensure safety and many years
of
trouble-free operation
of
your
product, please read the Important Safety
Instructions
carefully before
using
this
product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to petform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result
in
electric shock and/or fire.
In
order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product.
To
ensure your safety and prolong the service life of
your Liquid Crystal Television, please read the following precautions carefully before using the product.
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow
all
instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install
in
accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such
as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9)
Do not defeat the safety purpose ofthe polarized
or
grounding-type plug. Apolarized plug has two blades with
one wider than the other. Agrounding type plug has two blades and athird grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an
electrician for replacement ofthe obsolete outlet.
10)
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11)
Only use attachments/accessories specified by the manufacturer.
12)
Use only with the cart, stand, tripod, bracket,
or
table specified by the manufacturer, or sold with the
I)
apparatus. When acart is used, use caution when moving the cart/apparatus combination
to
avoid
injury from tip-over.
13)
Unplug this apparatus during lightning storms or when unused for long periods oftime.
14) Refer all servicing
to
qualified service personnel. Servicing is required when the apparatus has been damaged
in
any way, such
as
power-supply cord or plug is damaged, liquid has been spilled
or
objects have fallen into the
apparatus, the apparatus has been exposed to rain
or
moisture, does not operate normally,
or
has been
dropped.
Additional Safety Information
15)
Power
Sources-
This product should be operated only from the type of power source indicated
on
the marking
label. If you are not sure ofthe type of power supply
to
your home, consult your product dealer
or
local power
company. For products intended
to
operate from battery power, or other sources, refer
to
the operating
instructions.
16)
Overloading-
Do
not overload wall outlets, extension cords, or integral convenience receptacles as this can
result
in
arisk of fire or electric shock.
17)
Object and liqUid
Entry-
Never push objects of any kind into this product through openings
as
they may touch
dangerous voltage points
or
short-out parts that could result
in
afire
or
electric shock. Never spill liquid
of
any
kind on the product.
18) Damage Requiring
Service-
Unplug this product from the wall outlet and refer servicing
to
qualified service
personnel under the following conditions:
a)
When the AC cord
or
plug is damaged,
b)
If liquid has been spilled, or objects have fallen into the product,
c)
If the product has been exposed
to
rain or water,
d)
If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions
as
an
improper adjustment of other
controls may result
in
damage and will often require extensive work by aqualified technician to restore the
product
to
its normal operation,
e)
If the product has been dropped
or
damaged
in
any
way,
and
f)
When the product exhibits adistinct change
in
performance -this indicates aneed for service.
19)
Replacement
Parts-When
replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics
as
the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
20)
Safety
Check-Upon
completion of any service
or
repairs
to
this product, ask the service technician to petform
safety checks to determine that the product is
in
proper operating condition.
21)
Wall
or
ceiling
mounting-When
mounting the product
on
awall or ceiling, be sure
to
install the product
according
to
the method recommended by the manufacturer.
@-3