Sharp AQUOS LC-42SB45U User manual
SHAR~
LC-42SB45U
LIQUID CRYSTAL TELEVISION
TELEVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LiQUIDO
OPERATION
MANUAL
MODE
D'EMPLOI
MANUAL
DE
OPERACION
HIOH-DEFINITION TELEVISION
III
DOLBV®
DIGITAL I
HIGH-OEFINITION
MULTIMEDIA
INTERFACE
IMPORTANT
:
Please
read
this operation
manual
before starting operating the equipment.
IMPORTANT
:
Veuillez
lire
ce
mode d'emploi avant
de
commencer autilliser I'appareil.
IMPORTANTE
:
Lea
este
manual
de
operaci6n
antes
de
comenzar
aoperar
el
equipo.
LC-42SB45U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
•The illustrations and on-screen displays
in
this operation manual are for
explanation purposes and may vary slightly from the actual operations.
•Menu items that are not selectable are grayed out.
•To avoid scratching the frame or screen, please use asoft, lint free cloth
for cleaning. Approved cleaning cloths are available directly from Sharp
in
single
(OOZ
-LCD-CLOTH) or triple
(OOZ
-LCD-CLOTH-3) packs. Call 1-800
BE
SHARP for ordering, or VISIT www.sharpusa.comlSharpDirect.
IMPORTANT:
To aid reporting
in
case
of
loss or theft, please record the
TV's model and serial numbers
in
the space provided. The
numbers are located at the rear
of
the
TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING:
TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
This
"bolt
of
lightning" indicates
uninsulated material within
your
unit
may cause
an
electrical shock. For
the safety
of
everyone in your
household, please
do
not remove
product
covering.
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The "exclamation point" calls
attention
to
features for which you
should read the enclosed literature
closely
to
prevent operating and
maintenance problems.
CAUTlON: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
@)-
1
IMPORTANT INFORMATION
CAUTION:
DO NOT
PLACE
THIS
PRODUCT
ON
AN
UNSTABLE
CART,
STAND,
TRIPOD,
BRACKET,
OR
TABLE.
THE
PRODUCT
MAY
FALL
CAUSING
SERIOUS
PERSONAL
INJURY
AND
SERIOUS
DAMAGE
TO
THE
PRODUCT.
USE
ONLY
WITH A
CART,
STAND,
TRIPOD,
BRACKET,
OR
TABLE
RECOMMENDED
BY
THE
MANUFACTURER
OR
SOLD
WITH
THE
PRODUCT.
FOLLOW
THE
MANUFACTURER'S
INSTRUCTIONS
WHEN
INSTALLING
THE
PRODUCT
AND
USE
MOUNTING
ACCESSORIES
RECOMMENDED
BY
THE
MANUFACTURER.
A
PRODUCT
AND
CART
COMBINATION SHOULD
BE
MOVED
WITH
CARE.
QUICK
STOPS,
EXCESSIVE
FORCE,
AND
UNEVEN
SURFACES
MAY
CAUSE
THE
PRODUCT
AND
CART
COMBINATION
TO
OVERTURN.
WARNING:
FCC
Regulations state
that
any unauthorized changes
or
modifications
to
this
equipment
not
expressly approved
by
the
manufacturer
could
void
the
user's
authority
to
operate this
equipment.
CAUTION:
This
product
satisfies
FCC
regulations
when
shielded cables and connectors are used
to
connect
the
unit
to
other
equipment.
To
prevent
electromagnetic interference
with
electric appliances such
as
radios and televisions, use shielded cables and connectors
for
connections.
DECLARATION
OF
CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42SB45U
This device complies
with
Part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device may
not
cause harmful interference, and
(2)
this device must accept any interference received, including
interference
that
maycause undesired operation.
RESPONSIBLE
PARTY:
SHARP
ELECTRONICS
CORPORATION
Sharp
Plaza,
Mahwah,
New
Jersey 07495-1163
TEL:
1-80Q-BE-SHARP
For Business Customers:
URL
http://www.sharpusa.com
INFORMATION:
This
equipment
has been tested and
found
to
comply
wfth
the
limits
for
a
Class
B
digital
device, pursuant
to
Part 15
of
the
FCC
Rules.
These limits are designed
to
provide
reasonable protection against harmful interference
in
aresidential installation.This
equipment
generates, uses and can radiate radiofrequency energy and,
if
not
installed and used
in
accordance
with
the
instructions, maycause harmful interference
to
radio communications. However,
there
is
no
guarantee
that
interference
will
not
occur
in
aparticular installation.
If
this
equipment
does cause
harmful
interference
to
radio
or
television reception, whichcan be
determined
by
turning
the
equipment
off
and on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
-Reorient
or
relocate
the
receiving antenna.
-Increase
the
separation between
the
equipment
and receiver.
-Connect
the
equipment
into
an
outlet
on
acircuit different
from
that
to
which
the
receiver
is
connected.
-Consult
the
dealer
or
an experienced radiolTVtechnician
for
help.
"Note
to
CATV
system installer:This reminder
is
provided
to
call
the
CATV
system installer's
attention
to
Article 820-40
of
the
National Electrical Code
that
provides guidelines
for
proper
grounding
and, in particular, specifies
that
the
cable
ground
shall be
connected
to
the
grounding
system
of
the
building,
as
close
to
the
point
of
cable
entry
as
practical:'
This
product
utilizes tin-lead solder, and fluorescent lampcontaining asmall
amount
of
mercury. Disposal
of
these materials may be regulated
due
to
environmental considerations.
For disposal
or
recycling information, please contactyour local authorities,
the
Electronic
Industries Alliance: www.eiae.org,
the
lamp recycling organization: www.lamprecycle.org
or
Sharp
at
1-800-BE-SHARP
(For
U.S.A.
only)
TRADEMARKS
•
Manufactured
under
license
from
Dolby
Laboratories.
"Dolby"
and
the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
•
"HDMI,
the
HDMI
logo
and
High-Definition
Multimedia
Interface
are
trademarks
or
registered
trademarks
of
HDMI
Licensing
LLC."
•
Products
that
have
earned
the
ENERGY
STAR<!>
are
designed
to
protect
the
environment
through
superior
energy
efficiency.
@-2
DEAR SHARP CUSTOMER
Thank you
for
your purchase
of
the
Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity
is
used
to
perform many useful functions,
but
it
can
also cause personal injuries and propertydamage
if
improperly handled.This product
has
been engineered and manufactured with
the
highest priority
on
safety. However,
improper
use
can result in electric shock
and/or
fire. In order
to
prevent potential danger, please observe
the
following
instructions when installing, operating and cleaning
the
product.
To
ensure your safety and prolong
the
service life
of
your Liquid CrystalTelevision, please read
the
following precautions carefully before using the product.
1)
Read
these instructions.
2)
Keep
these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do
not
use this apparatus near water.
6)
Clean only
with
dry
cloth.
7)
Do
not
blockanyventilation openings. Install in accordance
with
the
manufacturer's instructions.
8)
Do
not
install near any heat sources such
as
radiators, heat registers, stoves,
or
otherapparatus (including
amplifiers)
that
produce heat.
9)
Do
not
defeat
the
safety purpose
of
the
polarized
or
grounding-type plug. Apolarized plug
has
two
blades
with
one
wider
than the other. A
grounding
type plug
has
two
blades and athird grounding prong.The wide blade
or
the
third
prong are provided for your safety.
If
the provided plug does
not
fit
into
your outlet, consult an electrician
forreplacement
of
the
obsolete outlet.
10)
Protect
the
powercord from being walked on or pinched particularly at plugs, convenience receptacles, and
the
point
where theyexit from the apparatus.
11)
Only use attachments/accessories speCified by
the
manufacturer.
12)
Use
only
with
the cart, stand, tripod, bracket, ortable specified
by
the
manufacturer,
or
sold
with
the 6l
apparatus. When acart
is
used,
use
caution when moving the cart/apparatus combination
to
avoid
injuryfrom tip-over.
13)
Unplug this apparatus during lightning storms
or
when unused for long periods
of
time.
14)
Refer all servicing
to
qualified service personnel. Servicing
is
required when
the
apparatus
has
been damaged in
any way, such
as
power-supply cord
or
plug
is
damaged, liquid
has
been spilled
or
objects have fallen
into
the
apparatus,
the
apparatus
has
been exposed
to
rain
or
moisture, does
not
operate normally, or
has
been dropped.
Additional Safety Information
15)
Power Sources-This product should be operated onlyfrom
the
type
of
power
source indicated on the marking
label.
If
you are
not
sure
of
the type
of
power supply
to
your home, consult yourproduct dealer
or
local power
company.
For
products intended
to
operate from battery power,
or
other
sources, refer
to
the operating
instructions.
16)
Overloading-Do
not
overload wall outlets, extension cords,
or
integral convenience receptacles
as
this can result
in arisk
of
fire orelectric shock.
17)
Object and Liquid
Entry-Never
push objects
of
any kind
into
this product
through
openings
as
they maytouch
dangerous voltage points
or
short-out parts
that
could result in afire orelectric shock. Never spill liquid
of
any kind
on
the
product.
18)
Damage Requiring
Service-Unplug
this product from the wall
outlet
and refer servicing
to
qualified service
personnel under
the
following conditions:
a)
When the
AC
cord
or
plug
is
damaged,
b)
If
liquid
has
been spilled,
or
objects have fallen
into
the product,
c)
If
the
product
has
been exposed
to
rain or water,
d)
If
the productdoes
not
operate normally
by
following the operating instructions.
Adjust onlythose controls
that
are covered
by
the operating instructions
as
an improperadjustment
of
other
controls may result in damage and will often require extensive work byaqualifiedtechnician
to
restore
the
product
to
its normal operation,
e)
If
the
product
has
been dropped ordamaged in any way, and
f) When the product exhibits adistinctchange in performance -this indicates aneed for service.
19)
Replacement
Parts-When
replacement parts are required, be sure
the
service technician
has
used replacement
parts specified by
the
manufactureror have the same characteristics
as
the original part. Unauthorized
substitutions may result in fire, electric shock, or
other
hazards.
20)
Safety
Check-Upon
completion
of
any service
or
repairs
to
this product, ask
the
service technician
to
perform
safety checks
to
determine that the product
is
in properoperating condition.
21)
Wall
or
ceiling
mounting-When
mounting
the
product
on
awall
or
ceiling, be sure
to
install
the
product
according
to
the method recommended
by
the manufacturer.
22)
The apparatus mustbe connected
to
amains socket
outlet
with
aprotected earthed connection.
23)
The appliance coupler
is
used
as
the
disconnect device
ofthis
apparatus, the disconnect device shall remain
readily operable.
@-3
IMPORTANT SAFETY INSTRUCTIONS
•
Outdoor
Antenna Grounding -
If
an outsideantenna
is
connected
to
the
television equipment, be sure
the
antenna system
is
grounded
so
as
to
provide some
protection
againstvoltage surges and
built-up
static charges. Article 810
ofthe
National
Electrical Code, ANSI/NFPA 70, provides
information
with
regard
to
proper
grounding
of
the
mast and supporting structure,
grounding
of
the
lead-in wire
to
an antenna discharge unit,
size
of
grounding
conductors, location
of
antenna-discharge
unit, connection
to
grounding
electrodes, and requirements
for
the
grounding
electrode.
EXAMPLE
OF
ANTENNA GROUNDING
AS
PER
NATIONAL
ELECTRICAL
CODE,
ANSI/NFPA 70
NEC
-NATIONAL
ELECTRICAL
CODE
ANTENNA
LEAD
IN
WIRE
ANTENNA
DISCHARGE
UNIT
(NEC
SECTION
810-20)
;-,"---.;:::::.&..
GROUNDING
CONDUCTORS
(NEC
SECTION
810-21)
~.c::::::.-GROUND
CLAMPS
~-
POWER
SERVICE
GROUNDING
ELECTRODE
SYSTEM
(NEC
ART
250,
PART
H)
•Water
and
Moisture-Do
not
use this
product
near
water
-
for
example, neara
bath
tub,
wash bowl, kitchen sink,
or
laundry
tub;
in a
wet
basement;
or
near a
swimming
pool;and
the
like.
•Stand -
Do
not
place
the
product
on
an unstable cart, stand,
tripod
or
table. Placing
the
product
on an unstable base can
cause
the
product
to
fall, resulting in serious personal injuries
as
well
as
damage
to
the
product.
Use
only
acart, stand,
tripod, bracket
or
table recommended
by
the
manufacturer
or
sold
with
the
product.When
mounting
the
product
on
awall,
besure
to
follow
the
manufacturer's instructions.
Use
only
the
mounting
hardware recommended
by
the
manufacturer.
•Selecting
the
location -Select aplace
with
no
direct
sunlight
and
good
ventilation.
•Ventilation -The vents and
other
openings in
the
cabinet are designed
for
ventilation. Do
not
cover
or
block these vents
and openings since insufficientventilation can cause overheating
and/or
shorten
the
life
of
the
product. Do
not
place
the
product
on
abed, sofa, rug
or
other
similar surface, since
they
can blockventilation openings. This
product
is
not
designed
for
built-in installation;
do
not
place
the
product
in
an enclosed place such
as
abookcase
or
rack, unless proper ventilation
is
provided
or
the
manufacturer's instructionsare followed.
•The Liquid Crystal panel used in this
product
is
made
of
glass. Therefore,
it
can break
when
the
product
is
dropped
or
applied
with
impact.
Be
careful
not
to
be injured
by
broken glass pieces
in
case
the
panel breaks.
•Heat -The
product
should be situated away
from
heat sources such
as
radiators, heat registers, stoves,
or
other
products
(including amplifiers)
that
produce heat.
•The Liquid Crystal panel
is
avery
high
technology
product
with
2,073,600 pixels,
giving
you fine picture details.
Occasionally, a
few
non-active pixels mayappear
on
the
screen
as
afixed
point
of
blue, green
or
red. Please
note
that
this
does
not
affect
the
performance
of
your
product.
•
Lightning
-For added
protection
for
this television
equipment
during
a
lightning
storm,
or
when
it
is
left
unattended and
unused
for
long
periods
of
time,
unplug
it
from
the
wall
outlet
and disconnect
the
antenna.This will preventdamage
to
the
equipment
due
to
lightning
and power-line surges.
•Power Lines -An outside antenna system should
not
be located in
the
vicinity
of
overhead
power
lines
or
other
electric
light
or
power
circuits,
or
where
it
can fall
into
such
power
lines orcircuits. When installing an outside antenna system,
extreme care should be taken
to
keep
from
touching
such
power
lines
or
circuits
as
contact
with
them
might
be fatal.
•To preventfire, never place any
type
of
candle
or
flames
on
the
top
or
near
the
TV
set.
•To prevent fire
or
shock hazard,
do
not
expose this
product
to
dripping
or
splashing.
Noobjects filled
with
liqUids, such
as
vases, should be placed on
the
product.
•To preventfire
or
shock hazard,
do
not
place
the
AC
cord
under
the
TV
set
or
other
heavy items.
•Turn
off
the
main
power
and
unplug
the
AC
cord
from
the
wall
outlet
before handling.
Use
asoft cloth and
gently
wipe
the
surface
of
the
display panel. Using ahard cloth may scratch
the
panel surface.
•
Use
asoft
damp
cloth
to
gently
wipe
the
panel
when
it
is
really dirty.
(It mayscratch
the
panel surface
when
wiped
strongly.)
•
If
the
panel
is
dusty, use an anti-static brush,
which
is
commercially available,
to
clean it.
•To
protect
the
panel,
do
not
use a
dirty
cloth, liquid cleaners
or
chemical
cloth
to
clean it, such materials may damage
the
panel surface.
•Do
not
displayastill picture
for
a
long
time,
as
this could cause an afterimage
to
remain.
•Install
the
product
on
the
place where
the
AC
cord can be
unplugged
easily
from
the
AC
outlet,
or
from
the
AC
INPUT
terminal
on
the
rear
of
the
product.
•When transporting
the
TV,
nevercarry
it
by
holding
or
otherwise
putting
pressure
onto
the
display.
Be
sure
to
always carry
the
TV
by
two
people
holding
it
with
two
hands -one hand on each side
of
the
TV.
•Do
not
insert foreign objects
into
the
product. Inserting objects in
the
airvents
or
other
openings may result in fire
or
electric
shock. Exercise special caution when using
the
product
around
children.
@-4
IMPORTANT SAFETY INSTRUCTIONS
CHILD SAFETY
It Makes ADifference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
•The home theater entertainment experience is agrowing trend and larger fl at panel
displays are popular purchases. However,
fl
at panel displays are not always supported on
the properstands
or
installed according to the manufacturer's recommendations.
•Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,
desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
•The consumer electronics industry is committed to making home entertainment enjoyable
and safe.
TUNE INTO SAFETY
•One size does NOT fit all. Follow the manufacturer's recommendations for the safe
installation and use of yourflat panel display.
•Carefully read and understand all enclosed instructions for properuse of this product.
•Don't allow children to climb on
or
play with furniture and television sets.
•Don't place flat panel displays on furniture that can easily be used as steps, such as a
chest of drawers.
•Remember that children can become excited while watching aprogram, especially on
a"larger than life" flat panel display. Care should be taken to place
or
install the display
where it cannot be pushed, pulled over,
or
knocked down.
•Care should be taken to route all cords and cables connected to the flat panel display
so that they cannot be pulled
or
grabbed by curious children.
WALL MOUNTING:
IF
YOU DECIDE TO WALL
MOUNT
YOUR FLAT PANEL
DISPLAY, ALWAYS:
•Use amount that has been recommended by the display manufacturerand/or listed by
an independent laboratory (such as UL, CSA, ETL).
•Follow all instructions supplied by the display and wall mount manufacturers.
•If you have any doubts about your ability to safely install your flat panel display, contact
your retailer about professional installation.
•Make sure that the wall where you are mounting the display is appropriate. Some wall
mounts are not designed to be mounted to walls with steel studs
or
old cinder block
construction. If you are unsure, contact aprofessional installer.
• A minimum of two people are reqUired for installation. Flat panel displays can be heavy.
'I~~.
www.CE.org/safety
Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.
consumer electronics industry. Morethan 2,200 companies enjoy the benefits of CEA
membership, including legislative advocacy, market research, technical training and
education, industry promotion and the fostering of business and strategic relationships.
@-
5
QUICK REFERENCE
Supplied Accessories
Make sure the following accessories are provided with the product.
Operation manual
(x
1)
Screws
(x4)
Page 6
Stand
(x
1)
Page 6
AC cord
(x1)
Page 7
00
"M"
size battery
(x2)
Page 8
Remote control unit
(x1)
Page 7
1m
•Always use the AC cord supplied with the
TV.
•AC cord enclosed
in
this product is for
11
0-125V.
In
using it on the 125-240VAC, please consult the following.
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP
6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.
Attaching/Detaching the Stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
mmm
•Attach the stand
in
the correct direction.
•Be sure to follow
the
instructions. Incorrect installation
of
the
stand
may
result
in
the TV falling over.
1Confirm that there are 4screws supplied with the stand unit.
j;J
~
~
1J
2
<D
Insert the stand into the openings on the bottom
of
the
TV.
®Insert and tighten the 4screws into the 4 holes on the bottom of the
TV.
1m
•To detach the stand, perform the steps
in
reverse order.
Detaching the stand neck for wall mounting
mmm
•Detach the stand neck
in
the correct direction.
•Do
not
remove
the
stand neck from
the
TV unless using an optional wall mount bracket
to
mount it.
1
<D
Loosen the 4screws that secure the stand neck 1
-----
....
by
using across-head screwdriver.
®Remove stand neck from the TV set.
2Loosen the 4screws and pull out hinge plate.
3
<D
Place the hinge plate
in
the TV set as illustration
shown.
®Place the stand cover
in
the TV set and tighten
the 4screws into the 4holes. 3
1m
•To attach the stand neck, perform the steps
in
reverse
order.
@-
6
QUICK REFERENCE
Quick Installation Tips 3Bundle the cords properly with the cable tie.
POWER
.---
POWER indicator
o
4How to turn on the television for the first time.
A)
Press POWER on the television.
B)
The POWER indicator on the front
of
the television lights GREEN.
~
q
CH
c5
a
INPUT
o
1Attach your antenna
to
the back
of
the television.
(See page 8.)
2Connect the AC plug for the television into the AC
outlet.
~
'------I,\---C]::D..
I
AC
outlet I
•
Place
the
N
close
to the
AC
outlet,
and
keep
the
power
plug
within
reach,
ImDJ
•TO PREVENT RISK OF ELECTRIC SHOCK,
DO
NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
mm
•
Speakers
cannot
be
detached
from
the
N.
• N
angle
cannot
be
adjusted.
Using the Remote Control Unit . .
,------
Remote
control
sensor
)~t9'---_POWERindicator
....
I "
30"--30"
, I /
30"
~
17'(5m)
II
Use the remote control unit by pointing
it
towards the remote control sensor on the
lV.
Objects between the
remote control unit and the remote control sensor may prevent proper operation.
•Cautions regarding the remote control unit
•
Do
not expose
the
remote control unit to shock.
In
addition,
do not expose the remote control
unit
to liquids,
and
do not
place
in
an
area
with
high
humidity.
•
Do
not
install
or
place
the remote control unit under direct
sunlight.
The
heat
may
cause deformation of the remote
control
unit.
•
The
remote control unit
may
not work properly
if
the
remote
control sensor
on
the
N
is
under direct sunlight or strong
lighting.
In
such
cases,
change the
angle
of
the
lighting
or
the
N,
or operate
the
remote control unit closer to
the
remote control
sensor,
IMPORTANT:
The
POWER
indicator
on
the
television
should
light
GREEN
indicating
you
have
power to
the
television.
If
the
POWER
indicator
on
the
television
still
does not light
up,
press POWER
on
the
remote
control to
turn
the
power
on.
IMPORTANT:
IF
THE
UNIT
DOES
NOT
POWER
ON
-
UNPLUG
THE
TELEVISION
FROM
THE
OUTLET
AND
REPEAT
THE
INSTALLATION
STEPS.
IF
YOU
STILL
ENCOUNTER
NO
POWER,
PLEASE
CONTACT
US
AT
1-800-BE-SHARP.
@-7
Preparation
Antennas
To enjoy aclearer picture, use
an
outdoor antenna. The following
is
abrief explanation ofthe types of connections
that are used for acoaxial cable.
If
your outdoor antenna uses a75-ohm coaxial cable with
an
F-type connector,
plug it into the antenna terminal at the rear of the
1V
set.
300-ohm twin-lead cable
(flat)
IF-type
connector
----oct}
75-ohm coaxial cable (round)
1.A
75-ohm system
is
generally around cable with F-type connector
that can easily be attached to aterminal without tools (Commercially
available).
2.
A300-ohm system
is
aflat "twin-lead" cable that can be attached
to
a75-ohm terminal through a300175-ohm adapter (Commercially
available).
ED
F-type connector should be finger-tightened only.
When connecting the
RF
cable to the
1V
set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your
1V
set.
(The
breaking
of internal circuit, etc.)
~~~type
coonector
75-ohm coaxial cable
Connecting Antenna
Cable
•Connect the antenna cable
to
the TV using one of the methods
in
the illustration as shown
(CD,
®, @or @).
IDIGITAL AUDIO
J-U-4~~~-:=iiiiOUT
..
PUT
.....
__
..
~t
I~I
300nS.-ohm
adapter
(commercially available)
•
I
or
I
3DO-ohm
twin-lead cable
300-0hm twin-lead
cable
(flat)
75-ohm
coaxial
cable
(round)
Home
Antenna
terminal
(7S-ohm)
....
ca.bl
..
elV
...
lea.d
...
I"
...
[jj
~===\l==«O
Coaxial
cable
{commerciallyavailable)
Home
Antenna
7S-ohm
coaxial
cable
(round)
terminal
(75-ohml
"""'--------
[!il e-===\l==<J
Coaxial
cable
(commerciallyavailable)
~~:::3:00:.0:hm='~:=~:i:.:~:a:::':~:~I:e-~<
'~<
~~::r
~~:~:~~ja:~TailoabITVeJ
antenna
_
Jor
7S-ohm
coaxial
cable
terminal
VHF
UHF
ANTENNA
ANTENNA
®VHF/UHF antenna
CD
Cable without aCATV
converter
@Combination
VHF/
UHF antenna
@Separate VHF/UHF
antenna
Installing Batteries
in
the Remote Control Unit
If
the remote control fails to operate
TV
functions, replace the batteries
in
the remote control unit.
1Open the battery cover. 2Insert
two
"AA"
size
batteries 3Close the battery cover.
(supplied with the product).
I
(±)
\\--
+
~i~'
•Place the batteries with their terminals
corresponding to the (+)and (- )
indications
in
the battery compartment.
mm
Improper use
of
batteries can result
in
chemical leakage or explosion. Be sure
to
follow the instructions below.
•Do not mix batteries
of
different types. Different types of batteries have different characteristics.
•Do not mix old and new batteries. Mixing old and new batteries can shorten the
life
of
new batteries
or
cause chemical leakage
in
old batteries.
•Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with acloth.
•The batteries supplied with this product may have ashorter life expectancy due to storage conditions.
•
If
you will not be using the remote control unit for an extended period of time, remove batteries from
it.
@-8
Contents
IMPORTANT INFORMATION 1
TRADEMARKS 2
IMPORTANT SAFETY INSTRUCTIONS 3
QUICK REFERENCE 6
Supplied Accessories................................................................................................................... 6
Attaching/Detaching the Stand...................................................................................................................... 6
Detaching the stand neck for wall mounting 6
Quick Installation Tips.................................................................................................................................... 7
Using the Remote Control Unit...................................................................................................................... 7
Antennas 8
Installing Batteries
in
the Remote Control Unit................................................................................................ 8
Contents....................................................•........................................................................................................ 9
Part Names 10
lV
(Front)
10
lV
(Side/Rear) 10
Remote Control Unit....................................................................................................................................
11
Connecting to External Equipment................................................................................................................ 12
Watching TV 13
Turning On/Off the Power 13
Initial Setup :13
Direct Button Operation 14
On-Screen Display Menu 17
Menu Items............................................................................................................................................ 17
For
lV
Mode................................................................................................................................................ 17
For
PC
Mode 17
On-Screen Display Menu Operation............................................................................................................. 18
Menu Operation Buttons 18
Picture Menu.......................................................................................................................... 19
Audio Menu.......................................................................................................................... 19
Features Menu.......................................................................................................................... 20
Parental Control Menu..........................................................................................................................
21
Setup Menu................................................................................................................................................. 23
Troubleshooting 24
Specifications................................................................................................................................ 25
PC
Compatibility Chart 26
Information
on
the Software License for This Product.................................................................................. 26
Calling for Service 27
LIMITED WARRANTY 27
Dimensional Drawings
•The dimensional drawings for the LCD TV set are shown on the inside
back
cover.
@)-9
Part Names
TV (Front)
II
j,
'"
Remote
control
sensor
r---
•POWER
,POWER indicator
(See
page
13.)
\..
~
'.'fC··f'.';'
'"
I
TV (Side/Rear)
*2
*1
SERVICE
terminal
INPUT 6terminal
(HDMI)
@~
AUDIO
@~
@IDEO
INPUT 3terminals
g'OED
(S'OE
AV
'N)
INPUT
6
~
AC INPUT terminal
*3
MENU
•
-'-I
MENU
button
INPUT
•
-I-I
INPUT button
)
POWER
b"ttoo
~JH-
Channel buttons
•
(CHAV)
~JH-
Volume buttons
•(VOL+/-)
ANTI
CABLE
L-AUDIO-R
INPUT 1terminals
COMPONENT
Y
PB PR
~ ~ ~
DIGITAL
AUDIO OUTPUT
~ ~ ~
terminal
PC
IN
L-AUDIO-R
DIGITAL
AUDIO
~~>
@@@ OUTPUT
H~~J~C
CO)
@@@@ @
(Q)
INPUT 7
*1
INPUT 4terminal
(HOMI)
INPUT 5terminal
(HOM
I)
INPUT 7terminals
(PC-IN) INPUT 2terminals Antenna/Cable
in
*1:
See pages 8and 12 for external equiprnent connection.
*2:
See page 18 for button operations.
*3:
See page 7for connecting the AC cord
..
@-10
Part Names
Remote
Control Unit
11
rlil~,
~
1
12
S
13
14
2
II
15
3
4
16
5
17
6
18
8
-----:~----,
9
----;.;:-f-~~
---------=---........,
10
---;-;-
ED
•When using the remote control unit, point it at the
TV.
1POWER: Switch the power on
or
enters standby mode.
(See page 13.)
20-9: Set the channel.
3•
(DOn:
(See
page 14.)
4SURROUND: Display the surround setting menu. (See
page 14.)
5FREEZE: Set the still image. Press again
to
return
to
normal screen.
6SLEEP: Allows you to set atime when the TV
automatically switches to standby. Each time you press
this button, the remaining time setting switches by 5
minutes up
to
3hours. This display will disappear after
afew seconds, and the sleep timer automatically starts
counting down.
•
If
you want
to
adjust the sleep timer again, you can
press this button repeatedly then change the time
setting.
•The TV will enter the standby
mode
when the
remaining time reaches zero.
7EXIT: Turn off the menu screen.
8CC: Display captions during closed-caption source. (See
page 15.)
9AUDIO: Display the MTS setting menu. (See page 15.)
10 FAVORITE CH
A, B, C, D: Select 4preset favorite channels
in
4different
categories. (See page 23 for details.) While watching,
you can toggle the selected channels by pressing A, B,
Cand D.
11
DISPLAY: Display the current channel (or input source)
information on the screen.
12 INPUT: Select aTV input source. (See page 14.)
13 MUTE: Mute the sound. "MUTE" will be displayed on the
screen, and the sound
is
silenced. The muting feature
can be released by pressing this button again
or
one
of
the VOL +1- buttons.
14 VOL +1-: Set the volume. (See page 14.)
15
CHV/!\:
Select the channel. (See page 14.)
16 ENT: Jumps
to
achannel after selecting with the
0-9
buttons.
17 FLASHBACK: Press
to
switch
to
the previously tuned
channel. Press again to switch
back
to
the currently
tuned channel.
•This function will not work if no channel has been
changed after the TV
is
turned on.
18 MENU: Display the menu screen.
19
.1"'1
....
1
..
ENTER: Select adesired item on the screen.
20 RETURN: Return
to
the previous menu screen.
21
VIEW MODE: Select the screen size. (See page 16.)
22 AV MODE: Select an adjusted picture and audio
settings. (User, Dynamic, Standard, Movie, Game.) (See
page 14.)
@-
11
Connecting to External Equipment
You can connect many types of external equipment to your
1V
like aBlu-ray disc player, HD-DVD player, DVD
player, VCR, Digital1V tuner, HDMI equipment, game console
or
camcorder. To view external source images,
select the input source from INPUT on the remote control unit
or
on the 1V.
(See
page 14.)
B\!ID
•To protect equipment, always tum off the TV before connecting any external equipment.
•Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting
a
Blu-ray
disc
player,
HD-DVD
player, DVD player, Digital TV
STB
(Air
or
Cable), VCR,
game
console
or
camcorder.
4
3
*1
*2
Terminal on
the
TV Terminal on external
Cable equipment
INPUT 3
VIDEO
AUDIO
Ee
@
R@
AV
cable (commercially available)
.@
L@@R
L@
VIDEO
AUDIO
INPUT 1
or
2
COMPONENT
AUDIO
?1
Component
video cable (commercially available)
~
v
Po
PR
v@
L@
@@@
po@
R@
~
~
COMPONENT
PA@
:g::J Audio cable (commercially available)
~
L@
@R
AUDIO
INPUT3 S-VIDEO cable (commercially available)
S·VIDEO
AUDIO
c:x:=JiDBD
CIIIIBCP
R@
L@
@R
L@
:g::,
Audio cable (commercially available)
~
S·VIDEO
AUDIO
INPUT
4,
5,
or
6*
Hom.
HDMI-certified cable (commercially available)
~
Hom.
Il
A
~
KJl
DIGITAL AUDIO *
OUTPUT o
DIGITAL
Coaxial cable (commercially available)
(}P
@
•AUDIO
90
DIGITAL
OUTPUT
AUDIO
INPUT
mD
*1 • To enjoy the 1
D8Dp
display capability, connect your external equipment using acomponent cable and set the
equipment
to
1
D8Dp
output.
*2 •The S-VIDEO terminal takes priority over the video terminals. (INPUT 3only)
*3 •When using an HDMI-DVI conversion cable, input the audio signal
to
AUDIO terminal of INPUT
5.
•To enjoy the 1
D8Dp
display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using
an HDMI-certified cable and set the equipment to 1
D8Dp
output.
*4 •Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal
in
HDMI
connection.
In
this case, set the audio formats
of
the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
*5 •Digital audio cannot be output through the HDMI terminal.
*6 •Dolby Digital audio output signals cannot be converted
to
PCM.
Connecting
a
PC
Terminal
on
the TV Cable Terminal on PC
INPUT?
PC
IN
MRGB cable (commercially available)
mI]J
~~@
~~@
ANALOG
RGB
AUDIO
121
3.5
mm
stereo minijack cable (commercially available)
@
o::=CJlII
1110==
@
AUDIO
INPUT
4,
5,
or
6HDMI-certified cable (commercially available)
~
Hom.
~
Hom.
K
~
~
4
mD
•The HDMI terminals only support digital signal.
•Refer to page 26 for alist
of
PC signals compatible with the
TV.
@-12
Watching TV
Turning On/Off the Power
)
POWER
00
"UTE
o
q
CH
d
MENU
o
"PUT
o
,
POWER
(On/Standby)
Press POWER on the 1V, or POWER on the remote control unit
to
turn
the power on.
•POWER indicator (Green): The TV
is
on. (After afew seconds, awindow
appears with sound.)
Press POWER on the 1V, or POWER on the remote control unit again
to
turn the power off.
•The
TV
enters standby and the image on the screen disappears.
•POWER indicator (Red): The TV
is
standby.
1mB
•If you are not going
to
use this TV for along period of time, be sure to remove
the AC cord from the AC outlet.
•Weak electric
power
is
still consumed even when the TV
is
turned off.
•If there
is
no signal input for
30
minutes, the
power
will turn
to
standby
mode
automatically.
When you turn on the
1V
for the first time, it will
automatically memorize the broadcasting channels
available
in
the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit.
(See
page
8.)
2. Connect the antenna cable
to
the TV. (See page 8.)
3. Plug
in
the AC cord
to
the AC outlet. (See page
7.)
Initial Setup
QijlQ
8
o . 0
00001
••••
=1
Air/Cable (Antenna setting)
Make sure what kind
of
connection
is
made with your TV
when selecting "Air"
or
"Cable".
3Press
JJ../T
to
select "Air"
or
"Cable".
Press the Bbutton
to
continue.
Language (Language setting)
Select from among 3languages: English, French and Spanish.
1Press
ll/T
to
select the desired language listed on the
screen, and then press
theB
button.
2If you are connecting
to
aHD cable box, press the A
button
to
exit. If you are connecting
to
Antenna or Cable
from wall outlet, press the Bbutton
to
next step.
4Press the Abutton
to
finish.
ImD
•Auto programming may take up
to
20
minutes
to
complete.
Digital channels will take longer than Analog
to
find and
program. Please wait until you see the Auto programming
complete message. The TV will then switch automatically
to
the first channel found.
@·13
Direct Button Operation
MUTE
Changing
Channels
Changing
Volume
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes.
•Press SURROUND to toggle between Mono, Stereo, and
Virtual
surround
modes.
ID
•You can have the same settings by choosing "Surround" on
the menu items. (See page 19.)
AVMODE
Allows you
to
capture and freeze amoving image that
you are watching.
Press FREEZE.
• A moving image is captured.
•Press FREEZE again
to
cancel the function.
ID
•If you are using the freeze function and abroadcast
activates the V-CHIP BLOCK, the freeze function will
be
canceled and aV-CHIP BLOCK message will appear.
FREEZE
Press FLASHBACK
to
switch
to
the previously tuned
channel.
•Press FLASHBACK again to switch back to the currently
tuned channel.
SURROUND
FLASHBACK
INPUT
To view external source images, select the input source
using INPUT
on
the remote control unit or
on
the
TV.
1Press INPUT.
• A list of selectable sources appears.
2Press INPUT again
or
press
..
/~
to
select the
input source.
•An image from the selected source automatically displays.
•Each time INPUT
is
pressed, the input source toggles.
ID
•See page 12 for extemal equipment connection.
You can change the volume by pressing
VOL
+/- on the
1V
or on the remote control
unit.
·To
increase the volume, press
VOL+.
•To decrease the voiume, press VOL - .
--@)
Mutes the current sound output.
Press
MUTE.
ID
•Mute can
be
canceled by using the method below.
-Mute will be canceled if you press VOL+/-
or
MUTE.
~
w.
ii
···1
•••
···1
•••
You can change channels by pressing
CHNV
or
0-9,
•(DOl).
Examples:
To
select a 1
or
2-digitchannel number
(e.
g., Channel
5):
Press 5
~
ENT.
To select a3-digit channel number
(e.
g., Channel
115):
Press 1
~
1
~
5~
ENT.
To select a4-digit channel number
(e.
g., Channel
22.1):
Press 2
~
2
~
•(DOT)
~
1
~ENT.
ID
•When selecting a1-digit channel number, it is not
necessary
to
press 0before the number.
Sleep
Timer
Allows you
to
set atime when the
1V
automatically
switches
to
standby.
Press SLEEP.
•The remaining time displays when the sleep timer has been
set.
•Each time you press SLEEP, the remaining time switches
as shown below.
0
...
5
...
10
...
15
•••
...
170
...
175
...
180
Off
•
•When set, the time automatically starts counting down.
•If you want
to
adjust the sleep timer, you can press SLEEP
twice then change the time setting.
•One minute before the time expires, the remaining time
displays every second.
ID
•Select
"0"
by
pressing SLEEP
to
cancel the sleep timer.
•
The
1V
will
enter standby
mode
(power indicator
lights
red)
when
the
remaining
time
reaches
zero.
AV MODE gives you 5viewing options to choose from
to
best match the surrounding environment of the 1V,
which can vary due
to
factors like room brightness,
type of program watched or the type
of
image input
from external equipment.
Press
AV
MODE. Current AV MODE displays.
•Press AV MODE again before the
mode
displayed
on
the
screen disappears. The mode changes as shown below:
USER: Allows the user
to
customized settings as desired.
You can set the
mode
for each input source.
DYMAMIC: Changes the image and sound settings
to
the factory preset values.
STANDARD: For normal
TV
viewing.
MOVIE: Brilliant picture settings for acinematic
experience.
GAME: Lowers image brightness for easier viewing.
@-14
Direct
Button
Operation
AUDIO
•MTS/SAP stereo mode
The
lV
has afeature that allows reception
of
sound
other than the main audio for the program. This feature
is
called Multi-channel Television Sound (MTS). The
lV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs
(SAP).
The SAP
feature allows a
lV
station to broadcast other
information, which could be audio
in
another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
•Stereo broadcasts: View programs like live sporting
events, shows and concerts
in
dynamic stereo sound.
•SAP broadcasts: Receive
1\1
broadcasts
in
either MAIN
or
SAP sound.
MAIN sound: The normal program soundtrack (either
in
mono or stereo).
SAP sound: Listen
to
asecond language, supplementary
commentary
or
other information. (SAP
is
mono sound.)
If stereo sound is difficult to hear.
•Obtain aclearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the television
broadcast signal.
Press AUDIO to toggle between audio modes.
Examples: when receiving
MTS
and SAP
MAIN +SAP mode:
MAIN"'"
SAP
MONO mode: MONO
•Digital broadcasting audio mode
The types
of
audio transmitted
in
adigital broadcast include
SURROUND
as
well as MONO and STEREO.
In
addition, it
is
possible for multiple audio tracks to accompany asingle
video track.
Press AUDIO to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO
(Audio1) -
STEREO
(Audio2)
'--
SURROUND (Audio3)
......
p.'."~
:~
•MTS only operates while
in
1\1
mode.
Closed Captions and Digital Closed Captions
Your
lV
is
equipped with an internal Closed Caption
decoder.
It
allows you
to
view conversations, narration
and sound effects as subtitles on your
lV.
Closed
Captions are available on some
lV
programs and on
some VHS home video tapes at the discretion
of
the
program provider.
Digital Closed Caption service
is
anew caption service
available only on
digitallV
programs (also at the
discretion of the service provider). It
is
amore flexible
system than the original Closed Caption system,
because it allows for avariety
of
caption sizes and font
styles. When the Digital Closed Caption service
is
in
use, it will be indicated by the appearance
of
a3-letter
abbreviation that also indicates the language
of
the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA
(French) or other language codes.
Not
all
programs and VHS videotapes offer closed
captions. Please press DISPLAY and look for CC
presence information.
In
the Closed Caption system, there can be more than
one caption service provided. Each
is
identified
by
its
own number. The "CC1" and "CC2" services display
subtitles of
lV
programs superimposed over the
program's picture.
In
the Closed Caption system, the "Text1" or "Text2"
services display text that
is
unrelated
to
the program
being viewed (e.g., weather
or
news). These services
are also superimposed over the program currently
being viewed.
1Press DISPLAY.
•This will present the Closed Caption information
display.
2Press CC while the Closed Caption setting is on
the screen.
•Press repeatedly until you select the desired closed
caption service.
Off-
On
-
On
during mute
t ,
@-15
Direct Button Operation
VIEW
MODE
You can select the screen size.
1Press VIEW MODE.
•The View Mode menu displays.
•The menu lists the View Mode options selectable for the type
of
video signal currently being received.
2Press VIEW
MODE
or
A/'''
while the View Mode menu is displayed
to
select adesired item on the menu.
•You can sequentially select aView
Mode
that has its own aspect ratio.
•For 4:3 programs
Example: Screen size images
Automatic S.Stretch Side Bar Zoom 16:9 Subtitle Stretch
(Smart stretch) •
D
bQd
IMI
[II]
lu]
1:0:1
..........
-
....
__
...........
Suitable for viewing Suitable for stretching Suitable for viewing Suitable for viewing Suitable for viewing
This
mode
is
useful
for
subtitles and 4:3 programs to
fill
conventional 4:3 wide-screen 2.35:1
1.78:1
DVDs.
When
enlarging picture the screen. programs
in
their anamorphic
DVDs
in
4:3 pictures and
viewing
1.85:
1
DVDs,
automatically to
fill
normal format.
full
screen.
leaving
the subtitle
stretch
mode
will
still
visible.
show
very
thin
black
the screen.
bands
at
the
top
and
bottom
of
the
screen.
•For
HD
programs
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at
the
top
and
bottom
of the screen.
ED
•When using Dot by Dot, it is possible to
see
noise or bars around different outer portions ofthe screen. Please change view
mode to correct this.
•For HO-OTV programs, only "Automatic", "Smart Stretch", and "Stretch" modes can be selected.
•For PC input mode
ED
•Connect the PC before making adjustments. (See page 12.)
•Selectable screen size may vary with input signal type.
Stretch
Dot
by Dot
[OJ
IQI
An
image
fully
fills
the
Detects
the
resolution
of
screen.
the
signal
and
displays
an
image
with
the
same
number
of
pixels
on
the
screen.
•
4:3
[OJ
Example: Screen size images
Input signal
•
Input signal
16:9
Stretch Dot by Dot
[TI]
[Q]
An
image fully
fills
the
Detects
the
resolution
of
screen.
the
signal
and
displays
an
image
with
the
same
number
of
pixels
on
the
screen.
@-16
On-Screen Display Menu
Menu Items
ForTV
Mode
Picture
Contrast Page 19
Brightness Page 19
Color Page 19
Sharpness Page 19
Color temperature :Page 19
Normal Page 19
Warm Page 19
Cool Page 19
Tint Page 19
Active contrast Page 19
View Mode Page 16
Automatic Page 16
Smart Stretch Page 16
Side Bar Page 16
Zoom Page 16
16:9 subtitle Page 16
Stretch Page 16
Audio Menu
Audio setting Page 19
Audio mode Page 19
Mono Page 19
Stereo Page 19
Virtual surround Page 19
A1temate
audio Page 19
Main Page 19
SAP Page 19
Digital audio language Page 19
AVL Page 19
Features Menu
Closed captions Page 20
Caption service Page 20
Digital caption service Page 20
Digital caption options Page 20
Reset to default... Page 20
Size Page 20
Text Page 20
Background Page 20
Edge Page 20
Favorite Channels Page 20
Sleep timer Page 20
Parental control Menu
Channel lock Page
21
US
TV ratings lock Page
21
US
Movie ratings lock Page 22
Canada English ratings lock Page 22
Canada French ratings lock Page 22
Region ratings lock Page 22
Set
PIN
IChange
Pin
Page
21
Setup Menu
Language Page 23
English Page 23
Franc;:ais
Page 23
Espanol Page 23
Auto CH Search Page 23
Input Source Page 23
Clock Page 23
Current software info Page 23
Reset Page 23
For PC Mode
Picture Menu
~~~~~~~;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
~~g:
~~
Color temperature Page 19
Normal Page 19
Warm Page 19
Cool Page 19
View
Mi~i~:.~i:::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::::::::
~:g:
~!
Audio Menu
~~~~gu~~~~~~.:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
~~g:
~~
Setup Menu
Language Page 23
English Page
23
Franc;:ais
Page
23
Input
S~~~=~~::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
~~g:
~g
Picture adjustment. Page 23
Auto adjust Page 23
Manual adjust... Page 23
Reset. Page 23
miD
•Some menu items may not be displayed depending on the selected input source.
@D·17
On-Screen Display Menu
On-Screen Display Menu Operation
Example Example
~I~~~'-CD
®
@
The bar above
is
an
operational guide for
the remote control. The bar will change
in
accordance with each menu setting screen.
•Exit •Next oPrevious
G)
Item displayed
in
yellow
•This indicates the item currently selected.
•Press
~
to
go
to
the adjustment screen for this item.
®Item displayed
in
white
•This indicates that the item can be selected.
®Item displayed
in
gray
•This indicates that the item cannot be selected.
There are various reasons
why
the items cannot
be
selected, but the main reasons are as follows:
-Nothing
is
connected to the selected input terminal.
-The function
is
not compatible with the current input
signal.
G)
Press
~/~
to enter the desired item or return to
the upper level menu.
®Press
£,/T
to
select the desired item.
®Press
£,/T
to
adjust the item.
mm
•Menu options differ
in
the selected input modes, but the
operating procedures are the same.
•The screens
in
the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
VOL +/- :Cursor
....
/~
on the remote control.
CH
V//\:
Cursor T/1I;. on the remote control.
MENU:
1I;./T/
....
/~:
ENTER:
RETURN:
Press to open or close the menu screen.
Press to select adesired item on the screen or
adjust aselected item.
Press to
go
to
the next step or complete the
setting.
Press to return
to
the previous step.
MENU: MENU on the remote control or ENTER on
the remote control while OSD menu is on.
MENU
o
'"PUT
o
0"
@-
18
White with reddish tone
t
White with bluish tone
On-Screen Display Menu
Picture Menu
Adjusts the picture to your preference with the
following picture settings.
Example
1Press
MENU
to display the MENU screen, and then
press
A/T
to select "Picture" and press ~to enter
it.
2Press
AfT
to
select aspecific adjustment item and
press
~
to
enter the setting.
3Press
AfT
to
adjust the setting and press
ENTER
or
....
to
return to the upper
level
menu.
4Press
MENU
to exit.
'8eIeCted
iten'i
,<,:;:
'TbUtton
·,&buttOfi·
-.
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color For more color
intensity intensity
Sharpness For less sharpness For more sharpness
Tint Skin tones Skin tones become
become reddish greenish
Color Temperature Setting
For abetter white balance, use color temperature
correction.
Warm:
Normal:
Cool:
Active Contrast Setting
Automatically adjust the image contrast according to
the screen.
Off:
No
adjustment.
On:
Automatically adjusts the image contrast.
View
Mode
Setting
Changes the format of the picture. (see page 16.)
em
•Picture settings (Contrast, Brightness, Color, Sharpness,
Tint, and Active Contrast) are limited when viewing aPC
signal input through the HOMI terminal.
Audio Menu
Adjusts the sound quality to your preference with the
following settings.
Example
1Press
MENU
to display the MENU screen, and then
press
AfT
to select "Audio" and press
~
to enter
it.
2Press
AfT
to
select aspecific adjustment item and
press
~
to enter the setting.
3Press
AfT
to select the setting and press
ENTER
or
....
to return to the upper
level
menu.
4Press
MENU
to exit.
Audio Setting
Changes the audio frequencies with different central
frequencies to create acompletely new and difference
sound depending on your
favorite.
Audio
Mode
Setting
Selects the modes for more spatial
or
surround sound
reproduction depend on the broadcast signals
or
signals for external inputs received.
Use
AfT
to toggle between "Mono", "Stereo", and
"Virtual surround" and press
ENTER
or
....
to return to
upper level.
Alternate Audio Setting
Use
AfT
to toggle between "Main" and second audio
program "SAP", when it
is
available
in
analog channel.
Digital Audio Language Setting
Gives
you the possibility to swap between main and
alternative language, when it
is
available
in
digital
channel.
AVL Setting
Automatically reduces the
volume
difference between
channels and programs. Use
AfT
to toggle between
"On" or
"Off".
@-
19
Other manuals for AQUOS LC-42SB45U
2
This manual suits for next models
1
Table of contents
Other Sharp LCD TV manuals
Sharp
Sharp AQUOS LC-46LE835U User manual
Sharp
Sharp Aquos LC-26AF3X User manual
Sharp
Sharp Aquos LC 46D62U User manual
Sharp
Sharp Aquos LC-46PX5X User manual
Sharp
Sharp LC-52SB57U User manual
Sharp
Sharp Aquos LC-42BT10U User manual
Sharp
Sharp AQUOS LC-32D62U User manual
Sharp
Sharp Aquos LC-32LE144E User manual
Sharp
Sharp Aquos LC-32G4U User manual
Sharp
Sharp LC-32LE700E System manual
Sharp
Sharp LC-40A1H User manual
Sharp
Sharp Aquos LC 20B1U User manual
Sharp
Sharp Aquos LC 45GD5U User manual
Sharp
Sharp LC32E67U - LC - 32" LCD TV User manual
Sharp
Sharp Aquos LC-65RX1X User manual
Sharp
Sharp LC26SB27UT - 26" LCD TV User manual
Sharp
Sharp LC-46LE631E User manual
Sharp
Sharp AQUOS LC-13B4U User manual
Sharp
Sharp Aquos LC-32DH77E User manual
Sharp
Sharp Aquos LC 30HV2U User manual
