Sharp AQUOS LC-80LE646E User manual

MODEL
LC-80LE645E
LC-80LE645RU
LC-80LE646E
LC-80LE646S
OPERATION MANUAL
LCD COLOUR TELEVISION

ASA
CE Statement:
Hereby, SHARP Electronics (Europe) GmbH declares that the wireless
LAN USB adapter (WN8522D 7-JU) is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at: http://www.sharp.de/doc/
WN8522D_7.pdf.
NOTE
The wireless LAN USB adapter is designed for indoor use only.

1
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure
safety and many years of trouble-free operation of your product, please read
Important safety precautions carefully before using this product.
Contents
Introduction [ ENGLISH ]
Introduction............................................................. 1
Dear SHARP customer....................................... 1
Contents............................................................. 1
Important safety precautions ............................. 2
Supplied accessories ......................................... 4
Preparation ............................................................. 5
Attaching the stand unit ..................................... 5
Using the remote control unit............................. 6
Part names and functions...................................... 7
TV (front/side view)............................................. 7
TV (rear view)...................................................... 7
Remote control unit............................................ 8
Quick guide ............................................................. 9
Operation overview ............................................ 9
Inserting the CA card into the CI module......... 11
Using the HOME screen................................... 12
Initial auto installation.......................................... 14
Initial auto installation....................................... 14
Watching TV .......................................................... 18
Daily operation ................................................. 18
EPG .................................................................. 20
Teletext ............................................................. 22
Connecting external devices............................... 23
Introduction to connections ............................. 23
Video connections............................................ 24
Audio connections ........................................... 26
AQUOS LINK ......................................................... 27
Controlling HDMI devices using AQUOS LINK ... 27
AQUOS LINK connection................................. 28
AQUOS LINK setup.......................................... 29
Operating an AQUOS LINK device .................. 29
Basic adjustment.................................................. 31
Picture settings................................................. 31
Audio settings .................................................. 33
Power save settings ......................................... 34
View settings .................................................... 35
TV start-up time setting.................................... 38
Individual setting — PIN................................... 38
Individual setting — Clock ............................... 38
Individual setting — Language......................... 39
Useful viewing functions...................................... 40
Optional features settings ................................ 40
Additional features ........................................... 43
Other useful features ........................................... 44
Time shift +....................................................... 44
How to operate Time shift +............................. 45
USB media/Home network .............................. 48
USB device compatibility ................................. 51
Home network server compatibility ................. 51
Selecting the picture size for video mode........ 51
Connecting a PC................................................... 52
Connecting a PC .............................................. 52
Displaying a PC image on the TV..................... 52
PC control of the TV......................................... 55
Network setup ...................................................... 57
Connecting to the network............................... 57
Net TV .................................................................... 59
What is Net TV?................................................ 59
Operations in Net TV ........................................ 59
Appendix ............................................................... 61
Troubleshooting................................................ 61
Updating your TV via DVB-T/T2*1/C/S*2/S2*2... 62
Getting update information .............................. 62
Information on the software licence for this
product........................................................... 63
Updating your TV via USB/network ................. 63
Trademarks....................................................... 64
Software licences for Net TV............................ 65
Disclaimers for services using the Internet ...... 65
Specifications................................................... 66
Specifications (Wireless LAN USB adapter)..... 67
Environmental specifications ........................... 68
Mounting the TV on a wall................................ 68
Wall mount kit specifications............................ 68
Dimensional drawings ...................................... 70
EU Energy Label for Televisions ....................... 71
I646 series only
J645 series only
NOTE
• The illustrations and the OSD in this operation
manual are for explanation purposes and may vary
slightly from the actual operations.

2
Introduction
Important safety precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a
damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
• Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel,
do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in
the cabinet of the TV.
• Water and moisture—Do not use the product near water, such as
bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
• Do not place vases or any other water-filled containers on this
product. The water may spill onto the product causing fire or electric
shock.
• Stand—Do not place the product on an unstable cart, stand, tripod
or table. Doing so can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or
sold with the product. When mounting the product on a wall, be sure
to follow the manufacturer’s instructions. Use only the mounting
hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven floor surface can cause the product to fall
from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation.
Do not cover or block these vents and openings since insufficient ventilation can
cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when
the product is dropped or impact applied. If the LCD panel is broken, be careful not
to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such
as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
• To prevent fire, never place any type of candle or naked flames on
the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the
TV set or other heavy items.
• Headphones—Do not set the volume at a high level. Hearing experts advise against
extended listening at high volume levels.
• Do not display a still picture for a long time, as this could cause an afterimage to
remain.
• There is power consumption always if main plug is connected.
• Servicing—Do not attempt to service the product yourself. Removing covers can
expose you to high voltage and other dangerous conditions. Request a qualified
person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture
details.
Due to the very large number of pixels, occasionally a few non-active pixels
may appear on the screen as a fixed point of blue, green or red. This is within
product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by putting pressure onto the display. Be sure
to always carry the TV by two people holding it with two hands—one hand on each
side of the TV.
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components
of the main unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in
neutral detergent diluted with water and thoroughly wrung out, and then wipe with a
soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet
and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to
remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.

3
Introduction
Caring for the front panel
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To
protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth
(wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may
scratch the surface of the front panel when wiped strongly).
• If the front panel is dusty, use an anti-static brush, which is commercially available, to
clean it.
WARNING
To prevent the spread of fire, keep candles or other open flames
away from this product at all times.

4
Supplied accessories
Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2)
Pages 6 and 8 Page 6
AC cord ( x 1) Stand unit ( x 1)
Page 9 Page 5
Wireless LAN USB adapter
(WN8522D 7-JU) ( x 1)
Page 58
Initial setup guide
(printed document)
USB memory
(operation manual)
Important safety
precautions
(printed document)
Introduction

5
Attaching the stand unit
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
• After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
• Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
1Confirm that there are twelve screws (eight long
screws and four short screws) supplied with the
stand unit.
21Set the supporting post for the stand unit
onto the polystyrene foam.
2Attach the stand base to the supporting
post.
3Insert and tighten the eight screws into the
eight holes on the bottom of the stand base.
• Hold the stand unit securely with one hand, and
then tighten the screws.
Stand base Long screws
TV front
Supporting post
3Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
• Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and
used as a work table (refer to the instructions on the
box to assemble the work table).
Soft cushion
4Insert and tighten the four screws into the four
holes on the rear of the TV.
Short screws
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
Preparation

6
Using the remote control unit
Inserting the batteries
Before using the TV for the first time, insert the two supplied LR03 (“AAA” size
alkaline) batteries. When the batteries become depleted and the remote control
unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline)
batteries.
1Open the battery cover.
2Insert the two supplied LR03 (“AAA” size alkaline)
batteries.
• Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
3Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to
follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different
characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of
new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries
can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to
storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove
the batteries from it.
• When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or
mercury.
Regulations concerning used batteries stipulate that batteries may no longer be
thrown out with the household rubbish. Deposit any used batteries free of charge
into the designated collection containers set up at commercial businesses.
Angle of the remote control unit
Use the remote control unit by pointing it towards the remote control sensor.
Objects between the remote control unit and sensor may prevent proper
operation.
5 m
Remote control sensor
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of the
unit.
• The remote control unit may not work properly if the
remote control sensor of the TV is under direct sunlight
or strong lighting. In such cases, change the angle of
the lighting or the TV, or operate the remote control unit
closer to the remote control sensor.
Preparation

7
TV (front/side view)
Illumination LED
Remote control sensor (Page 6)
OPC sensor (Page 31)
a(Power)
MENU (Menu)
b(Input source)
:r/s
(Programme [Channel])
i+/- (Volume)
TV (rear view)
USB 3 (WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
(645 series only)
Antenna terminal
DIGITAL AUDIO OUTPUT
terminal
HDMI 2/PC AUDIO (L/R)
jack*1
IThe HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC
AUDIO (L/R)). However, the proper item must be selected in the “Audio select” menu
(refer to page 41 for details).
TV (rear view) — continued
SD CARD
(VIDEO STORE) slot
AC INPUT
terminal
RS-232C terminal
PC terminal
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
EXT 1 (RGB) terminal
EXT 3 (Component/
AUDIO (L/R)) terminal
OUTPUT (Headphones/
AUDIO (L/R)) terminal*2
USB 1 port
HDMI 1 (HDMI/ARC)
terminal
HDMI 3 (HDMI) terminal
HDMI 2 (HDMI) terminal
HDMI 4 (HDMI) terminal
C.I. (COMMON
INTERFACE) slot
JWhen the headphone is connected to the OUTPUT terminal, the audio can be output
from the speakers (Page 42).
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended
listening at high volume levels.
Important information:
Satellite services are only available for the 645 model series.
Part names and functions

8
Remote control unit
4
5
3
6
7
8
10
11
12
9
2
114
13
15
16
17
18
19
20
21
22
1>a (Standby/On) (Page 18)
2ATV
Access conventional analogue TV mode.
DTV
Access digital TV mode.
SAT
Access satellite mode.
RADIO
DTV/SAT: Switch between radio and
data mode.
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
3EXT MEDIA buttons
EXT MEDIA buttons are used for AQUOS
LINK functions and Time shift functions,
etc.
• AQUOS LINK (Pages 27_30):
Interactively operate compatible
system devices using a single remote
control unit.
• Time shift + (Pages 44_47):
Temporarily record a programme you
are watching.
4Numeric buttons 0_9
Set the channel. Enter desired numbers.
Set the page in teletext mode.
• When the five Nordic countries
(Sweden, Norway, Finland, Denmark
or Iceland) are selected in the country
setting from initial auto installation
(Page 14), DTV services are four digits.
When another country is selected,
DTV services are three digits.
5A(Flashback)
Return to the previously selected
channel or external input.
67(Sound mode) (Page 19)
Select a sound multiplex mode.
f(Wide mode) (Pages 40, 51 and 52)
Select a wide mode.
7e(Mute)
TV sound on/off.
8i+/- (Volume)
Increase/decrease TV volume.
9D(HOME)
Display the “HOME” screen for enjoying
Internet connection and Home network
functions, as well as performing settings
for the TV.
0None
This button does not work on this
model.
Qa/b/c/d (Cursor)
Select a desired item.
;
Execute a command.
ATV/DTV/SAT: Display “CH list” when no
other “Menu” screen is running.
W>
ATV/DTV/SAT: Exit the “Menu” screen.
AQUOS NET+: Return to the start page.
ECONTROL (Pages 45, 47, 50 and 59)
Display a panel to operate some
functions on the screen.
Rp(Display information) (Page 19)
Display the station information (channel
number, signal, etc.) on the screen.
P. INFO
Display programme information
transmitted through digital video
broadcasting (DTV/SAT only).
Tb(INPUT) (Page 18)
Select an input source.
Y#(Page 31)
Select audio/video settings.
ECO(Standard/Advanced/Off)(Page34)
Select “Energy save” setting.
Um(Teletext) (Page 22)
ATV: Display analogue teletext.
DTV/SAT: Select MHEG-5 or teletext for
DTV/SAT.
I:r/s
ATV/DTV/SAT: Select the TV channel.
AQUOS NET+: Scrolls pages up/down.
OEPG (Pages 20_22)
DTV/SAT: Display the EPG screen.
P6(Return)
ATV/DTV/SAT: Return to the previous
screen.
AQUOS NET+: Return to the previous
page (This may not function for some
services).
AButtons for useful operations
[(Subtitle) (Pages 22 and 39)
Switch subtitle languages on/off.
k(Reveal hidden teletext) (Page 22)
1(Subpage) (Page 22)
3(Freeze/Hold) (Page 22)
Freeze a moving image on the screen.
Teletext: Stop updating teletext pages
automatically or release the hold mode.
SR/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g., EPG,
MHEG-5, teletext).
Important information:
Satellite services are only available for
the 645 model series.
Part names and functions

9
Operation overview
Follow the steps below one by one when using the TV. Some steps may not be
necessary depending on your TV installation and connection.
1. Preparation — Connecting the TV
r
s
q
o
n
p
• Place the TV close
to the AC outlet, and
keep the power plug
within reach.
• Product shape varies
in some countries.
Plug the standard DIN45325 plug (IEC 169-2)
75 qcoaxial cable.
Connect the satellite antenna cable.
Insert a CA card into the CI slot to watch
scrambled broadcasts (Page 11).
Connect the AC cord to the TV.
Plug in the AC cord.
Bundle the cables with the tie.
*Important information:
Satellite services are only available for the 645 model series.
2. Preparation — Setting the TV
Press aon the TV (Page 18).
Run the initial auto installation (Page 14).
wLanguage setting
wHome/Store setting
wCountry setting
wPIN setting
wChannel search setting
• Digital search
−Terrestrial
−Cable
• Analogue search
• Satellite search
Start searching channels
Congratulations!
Now you can watch TV.
• If necessary, adjust the antenna to attain maximum signal reception (Page 17).
Quick guide

10
3. Daily operation
1 Turn on/off the TV
(Page 18)
• You can turn on/off the
power using both the
remote control and the
TV.
2 Switch between digital, satellite and
analogue broadcast
(Page 18)
3 Change channels
(Page 18)
• You can also select a
channel from “HOME” >
“CH list”.
4 Select a programme using EPG
(Pages 20_22)
4. Advanced features
1 Use Time shift + function
(Pages 45_47)
5. Enjoy additional features
1 Connect external devices
Connection overview
(Pages 23_28)
• Be sure to turn off the TV and
any devices before making any
connections.
Switch input sources
(Page 18)
2 Enjoy photos, music and video stored
in USB media/Home network
(Pages 48_51)
3 Display a PC image on the TV screen
(Pages 52_56)
4 Enjoy internet service* with the TV
(Pages 12 and 57_60)
* The following service is now
available:
• YouTube™ (Page 12)
• Net TV (Pages 59–60)
Quick guide
2 Adjust TV settings and enjoy internet
service
(Pages 31_43)
• You can launch Internet
connection and Home
network functions, as
well as perform settings
for the TV from the
“HOME” screen. Select Enter End
USB media
Home network IP Control Network setup
Input changeTV Menu CH list

11
Inserting the CA card into the CI
module
In order to receive coded digital stations, a common
interface module (CI module) and a CA card must be
inserted in the CI slot of the TV.
1Carefully insert the CI module in the CI slot with
the contact side forward.
2The logo on the CI module must be facing
outward from the rear of the TV.
Checking CI module information
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “CI menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider
of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords
here.
NOTE
• It takes a few minutes to certify the licence key when
you insert a CA card into the CI+ compatible CI module
for the first time. This process may fail when there is no
antenna input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its
firmware. You may not receive any TV images before
upgrading. You can only use the power button during
upgrading.
• Copy protected content may not be output or may be
output with a copy control signal. The protect icon* is
displayed when P.INFO is pressed while watching copy
protected contents.
* Protect icon: X
• If the TV displays an update confirmation message for
the CA card while receiving CI+ compatible broadcasts,
follow the screen prompts.
• Make sure that the CI module is properly inserted.
Quick guide

12
Quick guide
Using the HOME screen
You can easily launch this “HOME” screen to enjoy Internet connection and
Home network functions and to perform settings for the TV.
LCFONT
This product is embedded with LC Font technology, which was developed
by SHARP Corporation for clearly displaying easy-to-read characters on LCD
screens.
Basic operation
1Display the HOME screen
Press D(HOME) and the “HOME” screen will be displayed.
2Select an item
Press a/b/c/d to select the desired service or menu, and then press ;.
See the right column for details on the operations in the “HOME” screen.
3Exit the HOME screen
The operation will exit the “HOME” screen if you press >before it is
completed.
Tips:
HOME menu contents
Select Enter End
USB media
Home network IP Control Network setup
Input changeTV Menu CH list
* When “ ” is displayed, the USB device for the “USB media” menu is not detected.
If “ ” is displayed, check your USB device connection.
* When “ ” is displayed, you cannot connect to your TV network.
If “ ” is displayed, check your TV network settings and connection.
*
When “ ” is displayed, the USB device for the “Time shift” is registered.
YouTube™
You can enjoy YouTube on your
AQUOS.
AQUOS NET+ (Pages 59_60)
You can connect to the internet
through AQUOS NET+.
Home network (Pages 48_50)
USB media (Pages 48_50)
TV Menu (Page 13)
Call up the OSD to perform settings
for the TV. The OSD for the settings
is called “TV Menu”. The “TV
Menu” enables various settings and
adjustments.
Input change
IP Control (Page 55)
Network setup (Pages 57_58)
CH list
Regarding the instructions in the manual
In this manual, the following expression is often used in order to simplify
instructions.
• Go to “HOME” > “TV Menu” > “Setup” > ...
This indicates how to navigate through the HOME screen using the a/b/
c/d and ; buttons.

13
Using the Menu screen
You need to call up the OSD to perform settings for the TV. The OSD for the
settings is called “Menu”. The “Menu” enables various settings and adjustments.
Display the Menu screen
Go to “HOME” > “TV Menu”.
• You can also display the Menu screen with pressing the MENU button on the
side of the TV.
Selecting in the Menu
Press c/d to select the desired menu,
and then press ;. Press 6to return to
the previous menu category.
Press c/d to select the desired sub-
menu, and then press ;.
Press a/b to select the item you want to
select/adjust, and then press ;.
Setup
Backlight
AV mode
Picture
OPC
[Off]
CH list
:Back:Enter
Menu
Contrast
Selecting options
Press a/b or c/d to
configure the control for
improving TV viewing, and
then press ;.
EXAMPLE
Backlight
Yes No
NOTE
• Refer to the guide display
below the menu bar to see
when to press the ;button.
About the guide display
The guide display below the menu bar shows
operations for the OSD.
• The bar above is an operational guide for the
remote control unit. The bar will change in
accordance with each menu setting screen.
SetupCH list
:Back:Enter
:Select
NOTE
• “Menu” options differ according to the selected input modes, but the operating
procedures are the same.
• Items with 4cannot be selected for various reasons.
• Some items cannot be selected depending on signal types, optional settings or
connected devices.
Using Software keyboard
Use the software keyboard when you need to input text.
Char.Set
Caps
Done
Cancel SP Delete
Clear
Cursor Left Caps Char.Set Cursor Right
1
8
76
2
3
4
9
10
11
5
1Char. Set
Changes character
set into the alphabet,
numbers, symbols, etc.
2Caps
Changes characters to
capital/lower case.
3Done
Confirm the entry.
4Cancel
Abort input and close
the software keyboard.
5R/G/Y/B (Colour)
buttons
Selects the coloured
items on the screen.
6Input cursor
Press c/d to move the
cursor when highlighted.
7Input field
The text you enter is
displayed as you type
it in.
8Character
Input characters by
using these buttons.
9?
Put a line break.
0Clear
Erases the character
string.
• When the cursor is
somewhere in a line:
The character string to
the right of the cursor
will be erased.
• When the cursor is at
the right end of a line:
The entire line will be
erased.
QDelete
If the cursor is at the
right end of a line,
this erases text one
character at a time.
• You can also delete
text by pressing 6
on the remote control
unit.
NOTE
• Depending on the application, there may be a different software keyboard than the one
indicated above.
Quick guide

14
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on
the power
EIs the antenna cable connected?
EIs the AC cord plugged in?
Important information:
Satellite services are only available for the 645 model
series.
1Press aon the TV.
• The initial auto installation wizard appears.
2Setting the OSD language.
Press a/b/c/d to select the desired language, and
then press ;.
3Selecting the location of the TV.
HOME STORE
Press c/d to select where you will use this TV, and
then press ;.
• The confirmation screen pops up only when
selecting “STORE”. Press c/d to select “Yes” or
“No”.
• HOME: “STANDARD” will be the default value for
the “AV mode” setting.
• STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no operation
using the TV or remote control unit for 30 minutes.
• STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen “STORE” by mistake, go to “HOME” >
“TV Menu” > “Setup” > “View setting” > “Reset” >
select “HOME” again.
4Setting the country.
Press a/b/c/d to select your country or area, and
then press ;.
• This setting screen only appears during the initial
auto installation.
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
5Setting the PIN.
1Press c/d to select “Yes”, and then press
;.
• When “No” is selected, the PIN code setting is
skipped.
2Enter a four-digit number as a PIN using the
0–9 buttons.
3Enter the same four-digit number as in step
2to confirm.
4Press ;.
NOTE
• When “France” is selected in the country setting, the
PIN code setting cannot be skipped.
• “0000” cannot be set as the PIN code.
• When the PIN code setting is skipped, the default PIN
code (“1234”) will automatically be set.
• To change the PIN setting, refer to Individual setting —
PIN (Page 38). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 61).
6Starting channel search.
Digital search
Analogue search
Satellite search
Press a/b to select “Digital search”, “Analogue
search” or “Satellite search”, and then press ;.
• (645 series only) After performing “Digital search”
or “Analogue search”, the screen switches to the
“Satellite search” setting. You should then execute
“Yes” if you want to search for satellite channels.
• To watch both digital broadcasts and analogue
broadcasts, you should perform “Digital search” or
“Analogue search” from “Auto installation” under
the “Setup” menu (Page 35).
• When you select “Satellite search”, only satellite
broadcasts will be searched.
• If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup”
menu (Pages 35_37).
NOTE
• If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from “HOME” > “TV
Menu” > “Setup” > “View setting” (Page 35).
• The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
• When “Italy” or “France” is selected in the country
setting, the default age restriction value is set to 18.
Initial auto installation

15
Digital broadcast setting
Press c/d to select “Terrestrial” or “Cable”,
and then press ;.
Terrestrial Cable
ESearching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
NOTE
• A region or service selection screen may display
depending on the country settings or cable providers
selections. Follow the screen prompts to make the
selections.
645 series only
After searching for terrestrial channels, the screen
switches to the “Satellite search” setting (Page 16).
ESearching for cable broadcasts
To change each item to the appropriate settings:
1Press a/b to select
the menu, and then
press ;.
2Press a/b/c/d or
0_9to select or input
the appropriate item/
value, and then press
;.
Scrambled stations [Yes]
Search method [Channel]
Start frequency
Network ID [None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
3Press a/b to select “Search start”, and then
press ;.
4Press c/d to select “Yes” to start searching
cable broadcasts, and then press ;.
5The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
645 series only
After searching for cable channels, the screen
switches to the “Satellite search” setting (Page 16).
Menu Description Selectable items
Scrambled
stations
Specifies if you
need to add pay-
TV services.
Yes, No
Search method
Specifies how
you search for
channels.*2
Channel,
Frequency, Quick
Start frequency From 47.0_858.0
MHz
Network ID Specifies the
network.*3None, 0_65535
Symbol rate 1/
Symbol rate 2*1
Input the value
received for
CATV.*4
1000_9000
QAM
modulation 1
16, 32, 64, 128,
256
QAM
modulation 2
None, 16, 32, 64,
128, 256
ISet up “Symbol rate 2” if the cable provider uses
several symbol rates.
JDetails about the “Search method” items are as
follows:
_Channel: Extracts all information from a channel
(quick, but needs corresponding TV stations).
_Frequency: Checks every frequency in range (slow).
_Quick: All services are searched by one frequency.
This menu works only when your cable provider
provides the frequency and the network ID (e.g.,
Homing channel). When “Quick” is selected,
“Scrambled stations” is automatically set to “No”, and
“None” for the “Network ID” menu cannot be selected.
KSet this to register only the specified network ID
without registering any special services.
LThe symbol rates are specified by the cable provider.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
645 series only
After searching for analogue channels, the screen
switches to the “Satellite search” setting (Page 16).
Initial auto installation

16
Searching for satellite broadcasts
(645 series only)
Press a/b to select “Satellite search”, and then
press ;.
Digital search
Analogue search
Satellite search
• The antenna connection setting screen is displayed.
Single satellite
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
NOTE
• You can select the antenna connection method from the
four types. Consult your dealers before using a method
other than “Single satellite”.
E“Single satellite” setting
1Press a/b to select “Single satellite”, and then
press ;.
2Press a/b/c/d to select your favorite
satellite, and then press ;.
Euro Bird 1
Atlantic Bird 1
NOTE
• Follow the instructions on the screen for “2 satellites
on toneburst switchbox”, “Max. 4 satellites on DiSEqC
multiswitch” and “Communal satellite system” settings.
• To set multiple satellite channels, go to “Max. 4 satellites
on DiSEqC multiswitch”.
• When a power supply is needed for your satellite
antenna, follow the procedure below in order to supply
the voltage specified by your service provider, etc.:
Go to “HOME” > “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL” >
“Satellite setup” > “Change setting” > “Communal
satellite system”.
ESearch start:
DVB-S/S2 channel searching.
1Press c/d to select “Yes”, and then press ;.
• To change the settings for “Scrambled stations” or
“Symbol rate”, press a/b to select the item to be
reconfigured and then perform “Search start”.
Yes No
Scrambled stations
SAT1-Symbol rate 1
SAT1-Symbol rate 2
Search start
[Yes]
2The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress,
press 6.
NOTE
• Scrambled stations: Specifies if you need to choose
pay-TV services.
• Follow the procedure to perform “Manual search” if you
want to configure the frequency or symbol rate and start
to search after performing the auto searching during the
initial auto installation.
−Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme setup” >
“Satellite setting” > “Manual search”.
−Symbol rate: You need to set each symbol rate of all
the satellite broadcasts that the TV can receive (eight
is the maximum number of symbol rates that can be
displayed).
Initial auto installation

17
Checking signal strength and
channel strength (DVB-T/T2*1/C/S*2/
S2*2)
If you install a DVB-T/T2/C/S/S2 antenna for the first
time or relocate it, you should adjust the alignment
of the antenna to receive a good reception while
checking the antenna setup screen.
I646 series only
J645 series only
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Antenna setup-
DIGITAL”.
2Press a/b to select “Digital setup” or “Satellite
setup”, and then press ;.
EChecking signal strength
3Press a/b to select “Signal strength”, and then
press ;.
Signal strength for DVB-T/T2/C
Supply voltage
CH No.
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
Signal strength for DVB-S/S2
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
EChecking channel strength
4Press a/b to select “Channel strength”, and
then press ;.
• You can input a specified frequency band using the
0_9numeric buttons.
Channel strength of DVB-T/T2
Supply voltage
CH No.
Current Max.
Signal strength MHz
Signal strength
Frequency
Channel strength
Current Max.
Quality
Channel strength of DVB-C
Supply voltage
Current Max.
Signal strength MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current Max.
Quality
Channel strength of DVB-S/S2
Current Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
Band
Channel strength
Current Max.
Quality
Vert/Low
5Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Quality” are obtained.
NOTE
• The values of “Signal strength” and “Quality” indicate
when to check the appropriate alignment of the
antenna.
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Antenna setup-
DIGITAL” > “Supply voltage”.
2Press c/d to select “On”, and then press ;.
Initial auto installation

18
Daily operation
Turning on/standby the power
Turning on the power
Press aon the TV or
>a on the remote
control unit.
Standby mode
Press aon the TV or TV aon the remote control
unit when TV is on.
• The TV enters standby mode and the image on the
screen disappears.
• Weak electric power is still consumed even when the TV
is turned standby mode.
• To completely turn off the power to the TV, unplug the
AC cord from the AC outlet. However, do not unplug the
AC cord unless otherwise instructed.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet.
Switching between digital, satellite*
and analogue broadcasts
Watching digital
broadcasts
Watching analogue
broadcasts
Watching satellite
broadcasts
*Important information:
Satellite services are only available for the 645 model
series.
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
SAT1 SAT2
SAT3SAT4
Changing channels
With :r/s With 0_9
Selecting an external video source
Once the connection is made, press bto display
the “INPUT” screen, and then press bor a/b to
switch over to the appropriate external source with
;.
TV
INPUT
Switchable
CH list
NOTE
• You can also select an external video source from
“HOME” > “Input change”.
• Only HDMI inputs which are not set for “Input skip”
(Page 41) and properly connected inputs can be selected.
Watching TV