Sharp LC 20SH6U User manual

SHARR
LIQUID CRYSTALTELEVISION
OPERATION
MANUAL
ENGLISH
LC-13SH6U/LC-15SH6U/LC-20SH6U
Model No.:
Serial No.:
Products that have earned the ENERGY STAR®
are designed to protect the environment through
superior energy efficiency.
ENHANCED DEFINITION TELEVISION
r:or,r
-MONITOR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
IMPORTANT:
To aid reporting
in case of loss or theft, please record the TV's model and serial numbers in the space
provided. The numbers are located at the rear of the TV.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
AThe lightning flash with arrow-head
symbol, within
an equilateral
... ----------------. triangle, is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
AThe exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions
in the
literature accompanying the product.
Printed in China
TINS-C346WJN1
06P03-CH

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART,
STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY
FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH ACART,
STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY
THE
MANUFACTURER OR SOLD WITH THE PRODUCT.
FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN
INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER.
APRODUCT
AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK
STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT
AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority to operate
this equipment. I I
U.S.A. ONLY
"Note to CATV system installer:This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the National Electrical Code that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system
of the building, as close to the point of cable
entry as practicaL" I"--U-.S-.A-. O-N-L-Y I
This product utilizes tin-lead solder, and fluorescent lamp containing asmall amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the Electronic Industries Alliance:
www.eia.org

DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can
result
in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD color TV
product, please read the following precautions carefully before using the product.
•Read
instructions-All operating instructions must be read and understood before the product is operated.
•Keep this manual
in asafe place -These safety and operating instructions must be kept in asafe place for future
reference.
•Observe
warnings-All warnings on the product and in the instructions must be observed closely.
•Follow
instructions-All operating instructions must be followed.
•
Attachments-Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can
result
in accidents.
•Power source-This product must operate
on apower source specified on the specification label. If you are not sure of
the type of power supply used in your home, consult your dealer or local power company. For units designed to operate
on batteries or another power source, refer to the operating instructions.
•AC cord protection -The AC cords must be routed properly to prevent people from stepping
on them or objects from
resting
on them. Check the cords at the plugs and product.
•Overloading -Do not overload
AC outlets or extension cords.
Overloading can cause fire or electric shock.
•Entering of objects and
liquids- Never insert an object into the product through vents or openings. High voltage flows in
the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not
spill water or liquid on the product.
•Servicing
-Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous conditions. Request aqualified service person to perform servicing.
•
Repair-If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request aqualified service
person to perform repairs.
a. When the AC cord or plug is damaged.
b. When aliquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by aqualified
technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the
product needs servicing.
•Replacement parts
-In case the product needs replacement parts, make sure that the service person uses replacement
parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of
unauthorized parts can result in fire, electric shock and/or other danger.
•Safety checks-Upon completion of service or repair work, request the service technician to perform safety checks to
ensure that the product
is in proper operating condition.
•Wall or ceiling mounting -When mounting the product
on awall or ceiling, be sure to install the product according to the
method recommended by the manufacturer.
•
Polarization-This AC cord may be equipped with apolarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This is asafety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
•
Cleaning-Unplug the AC cord from the AC outlet before cleaning the product. Use adamp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
•Water and moisture-
Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in awet basement.
•Stand-
Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only acart, stand,
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a
wall,
be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
•When relocating the product placed
on acart, it must be moved with utmost care. Sudden
stops, excessive force and uneven floor surface can cause the product to fall from the cart.
•
Ventilation-The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product.
Do not place the product on abed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as abookcase or
rack, unless proper ventilation is provided or the manufacturer's instructions are followed.
•The Liquid Crystal panel used
in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the Liquid Crystal panel breaks.
•Heat
sources-Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (inclUding amplifiers).
•The Liquid Crystal panel is avery high technology product with 921,600 thin film transistors, giving you fine picture
details. .
Occasionally, afew non-active pixels may appear
on the screen as afixed point of blue, green or red.
Please note that this does not affect the performance of your product.
•If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so
as to provide
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides
information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an
antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
.,.,-- POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC-NATIONAL ELECTRICAL CODE (NEC ART 250, PAR! H)
•Lightning -For added protection for this television equipment during alightning storm, or when it is left unattended and
unused for long period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
•Power Lines -
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
•To prevent fire, never place any type of candle or flames
on the top or near the TV set.
•To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such
as vases, should be placed
on the product.
•To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
•Do not display astill picture for along time, as this could cause
an afterimage to remain.
•Install the product
on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT
terminal
on the rear of the product.

Supplied Accessories
300-ohm twin-lead cable (flat)
rF-type connector
---II-
75-ohm coaxial cable (round)
1.A 75-ohm system is generally around cable with F-type connector that can easily
be attached to aterminal without tools (not supplied).
2. A300-ohm system is aflat "twin-lead" cable that can be attached to a75-ohm
terminal through a300175-ohm adapter (not supplied).
•. nIl3Mn·~j
•The antenna requirements for good color television reception are more important than those for black &white television
reception. For this reason, agood quality outdoor antenna is strongly recommended.
The following is abrief explanation of the type of connections that are provided with the various antenna systems.
(LC-13SH6U)
Make sure the following accessories are provided with the LCD TV set.
OUTDOOR ANTENNA CONNECTION
Preparation
;.....-~_--;- ANT. (Antenna
terminal)
F-type connector should be finger-tightened only.
When connecting the RF cable to the LCD TV set, do not tighten F-type
connector with tools.
.If tools are used, it may cause damage to your LCD TV set.
(The breaking of internal circuit, etc.)
~~
Antenna cable
(commercially available)
B. Separate VHF and/or
UHF Antennas
a~~rfna VHF
30.0-~hrn antenna
twin-lead
Combiner \ /
(not SUPplied~ fQO-~hrn
~
UT IN tw=in=-:;gea~~~
&g~Jr cable cr
{liD '
A. Combination VHF/UHF Antenna
300f75-ohm
Ladapter
(not supplied)
VHF/UHF
VHF/UHF antenna =:#
antenna J300-ohm
'tc-
or twin-lead
75-ohm
,L
coaxial cable L+
•Use one of the following two diagrams if you connect an outdoor antenna.
A: Using aVHF/UHF combination outdoor antenna
B: Using separate VHF and/or UHF outdoor antennas
•Connect the outdoor antenna cable lead-in to
ANT. (Antenna terminal) on the rear of the main unit.
• ~ tl) i tiJ =- F-type connector
~i~
~~~
75-ohm coaxial cable /
oAlign the tab on the battery cover (CD) and place
it while pressing
the tab (®) to close it.
~
: ••..•.•... p ..•.......•.•.. : •..•. : ..• :.: •. :. ::.: ..••.• : ®~ - .. /& : •.......... : .. : .•..•. :: ....•..•. :.: .....••.•....•...• :.: .• ::.
o0 .... :.:.. ~ C1::;,*
--= ~ . ~ /
~
o ,: , :+: ~ :.: •. : .••.....• $: .•..••
~
~~
e~ /
oDetach the cover
while pressing the
(T) part.
Cautions regarding use of the remote control
oDo not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
oDo not install or place the remote control under direct sunlight. The
heat may cause deformation of the unit.
o The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such acase,
change the angle of the lighting or main unit, or operate the remote
control
closer to the remote sensor window.
oPlace batteries with their
terminals corresponding
to
the (+) and (-)
indications in the battery
compartment.
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
oPlace batteries with their terminals corresponding to the (+) and (-) indications.
oDifferent types of batteries have different characteristics. Do not mix batteries of different types.
o Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries
to leak chemicals.
o Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause arash. If chemical
leakage is found, wipe it off with acloth.
o The batteries supplied with the LCD TV set may have ashorter operating time due to storage conditions.
oIf the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Before using the LCD TV set for the first time, install the two "AAA" size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new "AAA" size batteries.
1 Open the battery cover. 2Insert two "AAA" size batteries. 3 Close the battery cover.

Part Names of Main Unit
Tilt the display by holding the upper
part while securely holding down
the stand with your other hand.
To change the vertical angle of the LCD
TV set, tilt the screen up to 2.5 degrees
forwards or 10 degrees backwards.
Please adjust the angle so that the LCD
TV set can
be watched most comfortably.
•How to adjust the angle
VOLUME
2011111111111····················
I NOTE >
•Headphones are not included in the supplied accessories.
•
No sound is heard from the main unit speakers when a
headphone mini-plug is connected into
the headphone jack.
•
Do not set the volume at a high level. Hearing experts advise
against extended listening
at high volume levels.
Speaker
POWER SLEEP
o0 0
Plug the headphone mini-plug into the headphone jack
located on the front of the LCD TV set.
Adjust the sound volume using VOL (+)/(-)
on the remote
control.
On-screen display
CH (Channel)
(V)/(A)
VOL (Volume)
(-)/(+)
r POWER SLEEP 0l
Re:::::n:n:icat=·.··~··.· .... / ... ·./I· .... ··.· .... 1_-·· ~~s~@~·~-=-~~-=-~~-=-~~-J~~~ ::~:::e:~:~::~~::~i;~n~~i:he headphone jack
The POWER indicator lights up green The SLEEP TIMER indicator lights up red when the
when the power is on, and red when in the
SLEEP TIMER is set to "ON".
standby mode (the indicator will not light
up when the main
power is off).
Upper control panel
The examples used throughout this manual are based on the LC-20SH6U model.
INOTE >
•INPUT, CH (V)/(A), VOL (-)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation
manual provides adescription based on operation using the remote control.
Household
power outlet
Cable TV Line
POWER
AC cord
Connect to the POWER INPUT terminal of the LCD TV set using the AC cord (supplied).
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the
set for easy hookup. When connecting the 75-ohm coaxial cable
to the set,
screw the 75-ohm cable to the ANT. terminal.
•Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, acable
TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing
of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more
specific instructions on installing cable TV, consult
your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
"A" position on the RF switch (not supplied):
You can view all unscrambled channels by using the TV's channel keys.
"B" position on the RF switch (not supplied):
You can view the scrambled channels via the converter/descrambler by
using the converter's channel keys.
[NOTE>
•Consult your SHARP Dealer or Service Center for the type of splitter, RF switch, or combiner that might be required.
I NOTE >
• Unplug the AC cord from the power outlet when the LCD TV set is not to be used for a long period of time.

Part Names of Main Unit (Continued) Part Names
of Remote Control
\~ER~05~'
POWER ---...;-:..---0 O-oi-:----DISPLAY
Switches the Liquid Crystal \ \ Displays the receiving channel
Television power on
or standby. and the current time for 10
CD ® ® seconds.
Channel Select ---"';-:-1
Sets the cha::~ I% ~ ~
Selects audio settings. ~
,\
8® ® INPUT (V)/(A)
MUTE MUTE~ r--NPUr Switches the input source
Mutes the sound ........... -. ........... ...1 I M~ ~ Ibetween INPUT1, INPUT2,
f10~~ IINPUT3 and TV modes.
VOL (+)/(-) -----:-:~[~Jmt=J
Seffi the volume. II €s ~ II ~~~~l/~~nnel.
FLASHBACK ~ II~SLEEP
Returns to the previous II 0 O~II Sets the sleep timer.
channel.
AV MODE
AUDIO ONLY ~IIAUDIOONLY ~ SLEEP AV MODE
Outputs audio without
f~~cgeeC~.1 IJ.4K II ~rl~oo 61
/
~II\ I, ::~:: preferred AV MODE
~ , IIBO~ rT"\. 1tiITCD<~ Executes acommand.
Displays c,o:::s~5::: ~IIII 0 ~I ~:J~I \, MENU
Displays the menu screen.
Adjusts the brightness of the \\
screen.
(I ~-=-
'--------:---- A I""" I ~ I ~ (Cursor control)
PIC. FLIP \ SHARP ISelects adesired item on the
Sets the orientation,of the \
LCDTV~ screen.
picture. \..~
MENU RETURN ~
Returns to the previous ------
screen.
~
~:
PA@
L@
_10
R@
SoVlCEOO'
:: }INPUT1
AUDIO (L)
AUDIO (R)
VIDEO }
AUDIO (L) INPUT3/0UTPUT
AUDIO{R)
ANT. (Antenna terminal)
AUDIO (R)}
AUDIO (L) INPUT2
I'----+--VIDEO
'-- __ -- '--=..,..L-- S-VIDEO
Be sure to secure the cables and AC cord with the supplied cable clamp.
Round lock for Kensington
Security Standard slot*
*Using the Kensington Lock
• This LCD TV set has a Kensington Security Standard slot for
use with a Kensington MicroSaver Security System. Refer to
the information that came with the system for instructions on
how to use it to secure the LCD TV set.

EZ SETUP Basic Operation
Turn on the power of the connected video equipment.
Press INPUT
(V)/(A) to select the applicable input
source. The screen changes in order of INPUT1,
INPUT2, INPUT3 and TV mode each time INPUT is
pressed.
INPUT21
*
SWitching the Input Modes
(INPUT1/INPUT2IINPUT3lTV)
INPUT2 mode
INPUT1 mode
M~
(]E2S:)
ClQQ
\j~<:J
~I
o AVMoDE 0
AUDIO ONLY 0 SLEEP
INPUT11
48DP
~
.~
~
POWER indicator
(POWER)
~STEREO
SAP
MONO
Turning On and Off the Main Power
•Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
On-screen display
2
~STEREO
SAP
MONO
Press ENTER to access START EZ SETUP mode.
Press
AI"" to select "YES", and press ENTER.
I NOTE >
•If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please see CH-SETTING.
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
~
~
CONNECT ANTENNA
OR CABLE.
cc
o •
BACKUGHT
O<De<D
PIC.FUP MENU RETURN MENU
00 ••
POWER
Press POWER, located on the upper side of the main
unit, to turn on the TV. The SELECT LANGUAGE mode
will be displayed.
Press
AI''' to select "ENGLISH", "ESPANOL"
(Spanish) or "FRANQAIS" (French).
EZ SETUP during the First Power On
•When you turn on the TV for the first time, it will automati-
cally memorize the broadcasting channels.
Please perform the following instructions before you press
POWER.
(1) Insert the batteries into the remote control.
(2) Connect the antenna cable to the LCD TV set.
(3) Plug in the AC cord to the wall outlet.
Press ENTER to access CH-SETTING mode.
Press
AI"" to select "ON" or "OFF". When you select
"ON", the LCD TV set will automatically memorize the
broadcasting channels.
I NOTE >
•Do not let the EZ SETUP screen remain unattended for along
time.
•If EZ SETUP does not memorize all the channels in your region,
please see CH-SETTING for more information on manually
memorizing the channels using CH-SETTING.
•It may be diffic;ult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please see CH-SETTING
for more information on manually memorizing the channels using
CH-SETTING.
I NOTE >
•The On-screen display disappears after afew seconds.
•To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
INPUT3 mode
INPUT'I
*
TV mode
I NOTE >
INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
INPUT2 :
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
lNPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
INPUT3 :
INPUT3 mode is used to adjust the preset settings and IN or OUT
can beselected. lNPUT3 indication is not displayed when OUT is
selected.

Basic Operation (Continued)
PICTURE
The barabove
is an operational guide for the remote
control. The bar will change
in accordance with each menu
setting screen.
AUDIO
SETUP
•Menu setting screens
INOTE ~
•The illustrations and on-screen displays in this manual are for
explanation purposes and may vary slightly from the actual
;~~:~~~;~'n the setting condition, such as an input mode, it may
not be possible to adjust or set some items. In such cases, a
message will be displayed on the menu setting screen.
OPTION
Press MENU on the remote control to display the Menu
Screen.
Press
.... ~ to select the desired menu item.
•The cursor moves left
or right.
•The cursor indicates the selected menu item.
Press
VOL (-)/(+) to select the desired menu item.
•The cursor moves left
or right.
•The cursor indicates the selected menu item.
Press CH
(V)/(A) to select the desired item, and press
VOL (-)/(+) to adjust the selected item.
•For "AVMODE", "ADVANCED" and "RESET", press
INPUT to display the setting screen.
Press MENU to exit.
Press MENU on the main unit
to display the Menu
Screen.
Press .ifi,lY to select the desired item, and press
.... ~
to adjust the selected item.
•For "AV MODE", "ADVANCED" and "RESET', press
ENTER to display the setting screen.
Selecting Menu Items
• Using the remote control
Icc
o •
BACKUGHT
0 •••
PIC.FUP MENU RETURN MENU
0 •••
Press MENU RETURN to return to the previous screen,
or press MENU to exit.
•Usi'ng the control panel of the main. unit
Control panel of the main unit
The menus can be used to adjust the various settings of your
LCD
TV set. Select the desired menu item by following the
steps below. See the right column for each Menu screen.
INOTE ~
• The items displayed differ depending on the setting conditions.
•
The item selected is displayed in yellow.
•Settings most recently adjusted will be saved in memory.
Press the CD button.
Press the ®button.
Press the @button.
Press the ®button.
115
1
Press the ®button.
0-1
Changing channels with CH (A)/(V) on the remote control
Air: Press CH (A) and the channels change in the order shown below:
2 - 3 - ... -68 -69 - 2 - 3 - ...
Press CH (v) and the channels change in the order shown below:
3 - 2 - 69 -68 - ... - 3 - 2 - ...
Cable: Press CH (A) and the channels change in the order shown below:
1-2-3- ... -125-1-2-3- ...
Press CH (v) and the channels change in the order shown below:
3-2-1-125- ... -3-2-1- ...
•This LCD TV set allows you to select up to 125 channels
(1 to 125). To select achannel, enter a 2- or 3-digit number.
• Using FLASHBACK
•Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
•Press FLASHBACK again to switch back to the currently
tuned channel.
Changing Channels
You can select channels using Channel Select or
CH(A)/(V).
• Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for amoment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4seconds.
INOTE >
• The 3-digit channel number can be selected only when the
receiving mode is set to CABLE in CH-SETTING.
INOTE ~
• When selecting a1-digit channel number, do not fail to press the
® button first.
To select a3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4seconds.
~STEREO <ON AIR
SAP <ON AIR
MONO
Press MTS to'display the MTS screen.
Press
MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
VOLUME
50 IIIIIIIIIIIIIII~IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII··········
• To select MTS (Multichannel TV Sound)
\~ER--
e0
•••
•••
•••
•••
Sound Volume
•Press VOL (-) to decrease the sound volume.
The bar indicator shifts left.
I V?~U~~IIII1II ••••••••• _ •••••••• _ ••••••••••••••••••••••••••••• 1
INOTE ~
• "ON AIR" appears when a STEREO or SAP broadcast is being
aired.
•Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
• To mute the sound
•Press MUTE to temporarily turn off the sound.
The MUTE mark
D:SC is displayed for 4seconds.
I~
• To adjust the volume
•Press MUTE or VOL (+)/(-) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL
(+)/(-) or MTS.
I V?~U~~IIIIIII •••••••••••••••••••••••••••••••••••••••••••••••••• 1
INOTE ~
• When VOL (+)/(-) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
•
The Mute function is canceled when POWER is pressed.

Basic Adjustment Settings
AV MODE COLOR TEMPERATURE BACKLIGHT PICTURE Adjustments
cc
o •
BOHT •••
PIC.FUPMENUREllJRN MENU
00 ••
~AUDIO SETUP OPTION
AV MODE [DYNAMIC}
BACKLIGHT [BRIGHT) ~
~(45)~
BRIGBTNESS[ O)-~+
OOEOR t+ 51-~+
TINT [O].~.
SHARPNESS r o)-~+
AD'IlANOED
BESET ,
Press ~, ... to adjust the item to your desired position.
Press MENU to exit.
Press
~~ to select "PICTURE".
Press MENU to display the Menu screen.
Press
£,..", to select aspecific adjustment item.
You can adjust the picture to your preference with the
following picture settings.
BACKLIGHT The screen dims The screen brightens
CONTRAST For less contrast For more contrast
BRIGHTNESS For less brightness For more brightness
COLOR For less color intensity For more color intensity
TINT Skin tones become Skin tones become
purplish greenish
SHARPNESS For less sharpness For more sharpness
I NOTE >-
•When resetting all adjustment items (except for the items on the
AV MODE and ADVANCED menus) to factory preset values,
perform the following procedures.
CD Press £/"'" to select "RESET" in the PICTURE screen, and
press ENTER.
®Press £/"'" to select "YES", and press ENTER.
BACKLIGHT [DARK!
BACKLIGHT [NORMAL!
BACKLIGHT [BRIGHTl
BACKLIGHT [VARIABLE!
c
cc
o •
BACKUGHT
•• ®.
PIC.FUPMENURElURN MENU
00 ••
~AUDIO SETUP OPTION
AM MODE {DYNAMIC]
~tBRIGllT]~
CONTRAST [ 45] ~
SRIGHTNESSr Ol-~+
COLOR £+ 5]-~+
TINT t O].~.
SHARPNESS t0 ]-~+
ADVANCED
RESET
Press MENU to display the Menu Screen.
Press
~, ... to select "PICTURE".
Press
£,..", to select "BACKLIGHT".
Press BACKLIGHT to display the BACKLIGHT screen.
Press BACKLIGHT to change the setting.
Press ~~ to adjust the item to your desired position.
Press MENU to exit.
You can adjust the brightness of the picture.
Directly setting the BACKLIGHT
I NOTE :::.
•The BACKLIGHT screen automatically disappears in 3seconds.
•
[BRIGHn: Maximum brightness
[NORMAL): Suitable for viewing in awelHit area. Saves energy.
[DARK]: Sufficiently bright when viewing
in dim areas.
[VARIABLE]: The brightness can be adjusted to suit your prefer-
ence using
....
Press MENU to display the Menu screen.
Press
~, ... to select "PICTURE".
Press
£,..", to select "ADVANCED", and press ENTER.
GREEN Weaker green Stronger green
BLUE Weaker blue Stronger blue
cc
o •
BACKUGHT
0 •••
PIC.FUPMENURETURN MENU
00 ••
*When you select "USER", the following items are adjustable.
Sifl~ •. a.g~ii;i;i( •••• {
RED Weaker red Stronger red
You can adjust the color temperature to give abetter white
balance.
INOTE :::.
•When resetting the items in the "USER" setting to factory preset
values, perform the following procedures.
CD Press £/'" to select "RESET' in the ADVANCED screen, and
press ENTER.
®Press £/"'" to select "YES", and press ENTER.
Press MENU to display the Menu Screen.
Press AV MODE.
Press
~~ to select "PICTURE".
Before the AV MODE display disappears, press
AV MODE again and select your desired setting.
•Each time you press
AV MODE, the mode changes
as shown below.
C
AV MODE [STANDARD] ----+ AV MODE [DYNAMIC] ~
AV MODE [GAME] +- AV MODE [MOVIE] +- AV MODE [DYNAMIC (FIXED)] ..,.J
Press £,..", to select "AV MODE", and press ENTER.
Directly setting the AV MODE
AV MODE gives you preset options to choose from, to best
match the image based on room-brightness and playback
software used.
INOTE :::.
•You can select adifferent AV MODE item for each input mode.
(For example, select "STANDARD" for TV input and "DYNAMIC"
for VIDEO input.)
•When "AV MODE" is set to "DYNAMIC {FIXED)", "NO PICTURE
ADJUSTMENTS AVAILABLE
IN [DYNAMIC {FIXED)]." is
displayed and the items in the PICTURE screen (except
"ADVANCED") cannot be set.
STANDARD Changing image settings to standard
values.
DYNAMIC For aclear-cut image emphasizing
high contrast for sports viewing.
DYNAMIC (FIXED) Changing image settings to factory
preset values. No adjustments are
allowed.
MOVIE Controlling the contrast to enable
easier viewing
of dark images.
GAME Controlling the brightness of video
games and other images for easier
viewing.

Basic Adjustment Settings (Continued) Useful Features
---
---
__ 'II
@--
"CH SEARCH", and press
CHANNEL AIR 2
SKIP ON
Ct\BLE 1
cc
o •
BACKUGHT
0 •••
PIC.FUP MENURElURN MENU
0 •••
EZSETUP
AIR/CABLE
CH SEARCH
CH MEMORY
Press MENU to display the Menu screen.
Press
~~ to select "SETUP".
In step 4above, press J/;./'" to select "CH MEMORY",
and press ENTER.
~STEREO
SAP
MONO
Press J/;./", to move the cursor to "SKIP", and use~.
to select "ON" or "OFF".
Press MENU to exit.
Press ENTER. The tuner will search through all
available channels
in your area and add them to the TV
memory.
Press J/;./", to move the cursor to "CHANNEL", and use
~~ or Channel Select to select each desired channel
to add or erase.
2
• Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
•
Saving broadcast TV channels in the memory
INOTE ~
•To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel
and will not add any higher channels.
Press ~~ to select "SETUP".
Press J/;./'" to select "AIR/CABLE", and press ENTER.
Press J/;./T
to select "CH-SETTING", and press ENTER.
Press MENU to display the Menu screen.
CH-SETTING
cc
o •
BACKUGHT
0 •••
PIC.FUP MENURElURN MENU
00 ••
• Setting the AIR/CABLE
It is necessary to set the receiving mode to AI Ror CABLE
channels
to receive locally broadcast TV programs.
•EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate
EZ
SETUP, perform the following procedures.
CD Press AfT to select "CH-SETTING" in the SETUP screen,
and press ENTER.
®Press AfT to select "EZ SETUP", and press ENTER.
@Press AfT to select "YES", and press ENTER.
INOTE ~
•Receivable channels of your LCD TV set are:
AIR channels: CABLE channels:
VHF: 2through 13 1(HRC and IRC)
UHF: 14 through
69 2through 125 (STD, HRC and IRC)
cc
o •
BACKUGHT
0 •••
PIC.FUPMENURElURN MENU
00 ••
~OPTION
CH-SETTING
MTS
INPUTS SELECT
V-CHIP BL.OCK
CL.OSED CAPTION
LANGUAGE
Press MENU to exit.
Press J/;./", to change the setting, and press ENTER.
Press J/;./", to select desired item, and press ENTER.
Press
~~ to select "SETUP".
Press MENU to display the Menu screen.
SETUP
MTS [STEREO] Stereo audio [SAP] Secondary
audio program
[MONO]Monophonic
audio
INPUT3 SELECT [IN] [OUT
a:] FAO]
INPUT3fOUTPUT Line Output is
terminals selecled as selected, Output
input terminals. volume
is fixed,
Speaker output is
available.
[OUTD* VAO]
Line Output
is
selected, Output
volume is variable,
Speaker output is
mute.
LANGUAGE [ENGLISH] [ESPANOL]
[FRANCAIS]
~SETUP OPTION
TREBLE [ 01-~+
BASS [ Ol-~+
BALANcer 0 ll.~a
aeSET
Press MENU to exit.
Press
.... ~ to adjust the item to your desired position.
Press MENU to display the Menu screen.
Press
~~ to select "AUDIO".
Press J/;./'" to select aspecific adjustment item.
AUDIO Adjustments
TREBLE For weaker treble For stronger treble
BASS For weaker bass For stronger bass
BALANCE Decrease audio from Decrease audio from
the right speaker the left speaker
You can adjust the sound quality to your preference with the
following settings.
INOTE ~
•The items on the AUDIO menu cannot be set when "INPUT3
SELECT' is set to "OUT
D* VAO".
•When resetting all adjustment items to factory preset values,
perform the following procedures.
CD Press AfT to select "RESET', and press ENTER.
®Press AfT to select "YES", and press ENTER.
INOTE ~
•If CH SEARCH is performed again, the previously memorized
channels will
be lost.

V-CHIP Settings
•V-CHIP
oThis function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
oRestriction of TV programs includes two ratings that contain information about the program: the MPAA (Motion Picture Association of
America) rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and
content.
oSince a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
MPAA rating
Canadian Rating Systems
•The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission
(CRTC) policy on violence
in television programming.
•While violence is the most important content element to be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and mature themes.
•When setting the V-CHIP on the Canadian system, you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
RATING
GGENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
age PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
based RRESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
XXis an older rating that is unified with NC-17 but may be encoded
in the data of older movies.
C
C8+
Children: Intended for younger children under the age of 8years. Pays careful attention to
themes that could threaten their sense of security and well-being.
Children over 8years old: Contains
no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see
on the screen.
INOTE >
oThe MPAA rating is only age-based.
MPAA rating
Example 1:
PG-13 in the age-based rating is
blocked, this will also
automatically block the higher
ratings R, NC-17 and X.
1. User setting
G
PG
PG-13 BLOCK
BLOCK
NC-17 BLOCK
BLOCK
2. Block table
1
G ~~i~
notto
block
Select
age block
based auto-
block
auto-
block
auto-
block
Example 2:
R in the age-based rating is
blocked, this will also
automatically block the higher
ratings NC-17 and X.
1. User setting
G
PG
PG-13
BLOCK
NC-17 BLOCK
BLOCK
2. Block table
IG
~f~i~
not to
block
notto
age block
based Select
block
auto-
block
auto-
block
Age
G
PG
14+
18+
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
Parental Guidance: Intended for ageneral audience, but may not be suitable for younger
children (under the age of
8) because it could contain controversial themes or issues.
Over 14 Years: Could contain themes where violence
is one of the dominant elements of
the storyline, but it must be integral
to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
Adults: Intended for viewers
18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
TV parental guidelines
Canadian French ratings
¢:= content based ~
FV VSLD
Rating (Fantasy (Violence) (Sexual (Adult (Sexually
Violence) Situation) Language) Suggestive
Dialog)
TV-Y (All children)
[8] [8] [8]
ig]
[8]
ft
TV-Y7 (Direct to Older Children) X
[8]
[8] [8] [8]
TV-G (General Audience)
[8] [8]
~
[8]
age
based TV-PG (Parental Guidance Suggested) XXXX
~
TV-14 (Parents Strongly Cautioned) XXXX
TV-MA (Mature Audience Only) XXX
[8]: The content rating can be set, but this rating is not normally broadcast by TV stations.
X :The content rating can be set.
Age
G
8ans+
13ans+
16ans+
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot
in ahumorous or unrealistic manner.
General but inadvisable for young children: May be viewed by awide public audience, but
could contain scenes disturbing to children under 8who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
Over
13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
Over 16 years: Could contain frequent violent scenes and intense violence.
Over
18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
18ans+
INOTE >
oAge-based ratings can be modified by the content-
based ratings, but only in the ·combinations indicated
by an X in the table above. .
oChoosing alower age-based rating blocks the higher
age-based ratings regardless of content rating
settings.
•If you set TV-Y and TV-Y7 to BLOCK, BLOCK
CONTENT will display all items.
1
age
I
TV-V
TV-Y7 BLOCK
TV-G BLOCK
TV-PG BLOCK
TV-14 BLOCK
TV-MA BLOCK
BLOCK CONTENT
(DLSVFVj
TV parental guidelines
Example:
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG, TV-14 and TV-MA. In addition,
D,·L, S, Vand FV in BLOCK CONTENT are automatically blocked unless you manually set BLOCK CONTENT.
1. User setting

Useful.Features (Continued)
MENU
VOL(+)
Repeat steps 1to 3of Setting V-CHIP, then "INPUT
SECRET NO." will be displayed.
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
Upper control panel of the main unit
Repeat steps 1to 3of Setting V-CHIP, or 1and 2of
Canceling
the V-CHIP BLOCK screen while V-CHIP
BLOCK
is activated, then "INPUT SECRET NO." will
be displayed.
Press and hold both CH
(A) and VOL (+) on the main
unit simultaneously until the message "INPUT SECRET
NO." blinks.
Press MENU to exit.
•Changing V-CHIP BLOCK settings
•Changing
or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
__ el
<e e_
1
---
@e®
Press MENU to exit.
v- CH I P H AS BE ENACT I VAT E 0
TV-14
oL S V
"V-CHIP HAS BEEN ACTIVATED" appears if you watch
aprogram with the same Program Rating data you
configured.
Press MENU to display "INPUT SECRET NO.".
INOTE >-
•If "STATUS" is set to "OFF", V-CHIP BLOCK will not be
activated.
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK
is temporarily canceled. If you
input an incorrect secret number, "SECRET NO.
IS
INCORRECT" is displayed. In this case, input the
correct secret number.
INOTE >-
•"V-CHIP HAS BEEN ACTIVATED" will not be displayed if
"STATUS" is set to "OFF".
•Activating V-CHIP BLOCK
• Setting STATUS
Icc
o •
BACKUGHT
O<De®
PIC.RJPMENURElURN MENU
00 ••.
•Canceling the V-CHIP BLOCK screen while V-
CHIP BLOCK is activated
~
L BLOCK
S BLOCK
V BLOCK
FV BLOCK
Press MENU to exit.
Press
A/'- to select "TV GUIDELINES", and press
ENTER.
Repeat steps 1to 4of
Setting V-CHIP.
Press
AtY to select the desired item, and press .... 1... to
select "BLOCK" or
"-----,, (unblock).
•
Setting BLOCK CONTENT (TV GUIDELINES)
_ee
---
__ e
<§)e®
-
8 ans+ BLOCK
13 ans+ BLOCK
16 ans+ BLOCK
18 alls+ BLOCK
~
C8+ BLOCK
G BLOCK
PG BLOCK
14+ BLOCK
16+ BLOCK
cc
o <8
BACKUGHT
oe •
PlC.RJP MENU MENU
00 •
Press MENU to exit.
(Canadian English ratings) (Canadian French ratings)
Press MENU to display the Menu screen.
Press
A/'- to select the desired item, and press .... ~
to select "BLOCK".
(MPAA rating) (TV GUIDELINES)
II IICI II '
G -----
~
PG-13 BLOCK
R BLOCK
NC-17 BLOCK
x BLOCK
Press .... ~ to select "SETUP".
Press
AiY to select "V-CHIP BLOCK", and press ENTER.
"INPUT SECRET NO." will be displayed. Input the 4-
digit secret number by using Channel Select.
INOTE >-
•When you input the secret number for the first time, press
ENTER to register. Otherwise, continue to step
5.
V-CHIP Settings.(Continued)
V-CHIP settings allow you to set MPAA rating, TV
GUIDELINES, Canadian English ratings
and Canadian French
ratings.
•Setting V-CHIP
INOTE >-
•The setting automatically enters "BLOCK" for any ratings below
your selection.

Press .... /~ to select "OPTION".
Press AUDIO ONLY again. The screen image will
disappear.
Press AUDIO ONLY again. The screen image will be
displayed again.
AUDIO ONLY [OFF]
PRESS'AUDIO ONLY'FOR VIDEO OFF
AUDIO ONLY
When listening to music from a music program, you can set
the Liquid Crystal display off and enjoy audio only.
I "~" I
fit AVMODE 0
1
1.",:"y 0 SLEEP
o •
BACKLIGHT
0 •••
1,00"""' ••
Setting the AUDIO ONLY on the Menu screen
Press MENU to display the Menu screen.
Directly setting the AUDIO ONLY
Press AUDIO ONLY. 'PRESS "AUDIO ONLY" FOR
VIDEO OFF' is displayed on the screen.
la.OM STRETCH 4:3
Press MENU to display the Menu screen.
Press .... ,. to select "OPTION".
Press AfT to select "VIEW MODE", and press ENTER.
(For an image
stretched vertically
with bands at the left
f()I ~O VF()9
and right sides) ~ ~ ~ ~
[Q]
(For an image
s"eCQj"YI [Q) (§) [OJ [QJ
VIEW MODE
cc
o •
BACKLIGHT
0 •••
PIC.FLlP MENUREJURN MENU
00 ••
Press MENU to exit.
You can select the picture display size for the playback image
of the DVD player from the following four modes: "4:3", "16:9",
"ZOOM" and "STRETCH".
4:3 Displays the image
in a4:3 size.
16:9 Stretches the image horizontally to display it in a
16:9 size.
ZOOM Displays the center part of the image by enlarging
it towards the horizontal and vertical directions.
STRETCH Stretches the image horizontally.
I NOTE >
•The 4:3 image will be distorted on the screen when the ''VIEW MODE"
is set to "16:9".
•When the CLOSED CAPTION mode is set to "CC1", "CC2", "T1" or
"T2", "ZOOM" and "STRETCH" cannot be set for "VIEW MODE".
CCITEXT[OFFJ
Directly setting the CLOSED CAPTION
Press CC to change the setting.
~CC/TEXT [OFF] CC/TEXT [CC1]~
L CC/TEXT [T2] Eo- CC/TEXT [T1] Eo- CC/TEXT [CC2]-'
Press CC to display the CCITEXT screen .
I NOTE ~
•CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
I NOTE ~
•If abroadcast contains Closed Caption data and MUTE is
pressed, the LCD TV set enters CLOSED CAPTION mode
automatically. Pressing MUTE again will return the LCD TV set
to its previous condition.
•Closed Caption may malfunction (white blocks, strange
characters, etc.) if signal conditions are poor or if there are
problems at the broadcast source. This does not necessarily
indicate aproblem with your LCD TV set.
•If any button is pressed to call up the On-Screen Display while
viewing aClosed Caption broadcast, the closed captions will
disappear momentarily.
•If no TEXT broadcast is being received while viewing in the
TEXT mode, the screen may become blank for some programs.
Should this occur, switch the CLOSED CAPTION mode to OFF.
•If you select "CC1", "CC2", "T1" or "T2" (or MUTE is pressed)
while "VIEW MODE" is set to "ZOOM" or "STRETCH", then the
mode for "VIEW MODE" will be automatically changed to "4:3"
or "16:9".
SHARP
LCDTV
cc
••
BACKLIGHT·
0 •••
PIC.FLlPMENUREJURN MENU
00 ••
\
\ M~ .•.•. E. r--1NPur
I V ~
~',~i¥~ A
~
CtQQ
\)~(J
~
I0
AVMODE 0
AUDIO ONLY 0 SLEEP I
Press .... f~ to select "SETUP".
Press MENU to display the Menu screen.
Press AfT to select "CLOSED CAPTION ", and press
ENTER.
Press MENU to exit.
I NOTE >
•CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
Setting the CLOSED CAPTION on the Menu screen
CLOSED CAPTION
•Setting CLOSED CAPTION
•This LCD TV set is equipped with an internal Closed Caption
decoder. "Closed Caption" is asystem which allows
conversations, narration, and sound effects in TV programs and
home videos to be viewed as captions on the TV screen (see
the illustration).
•Not all programs and videos will offer closed captioning. Please
look for the "~' symbol to ensure that captions will be shown.
•The Closed Caption broadcasts can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are
available: CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commen-
taries of TV dramas and news
programs while allowing aclear view
of the picture.
The TEXT mode displays various
information over the picture (such as
TV program schedules and weather
forecasts, etc.) that is independent of
the TV programs. L~~~~~~U

Useful Features (Continued)
BLUE SCREEN SLEEP TIMER NO SIGNAL OFF PICTURE FLIP
[MIRROR]
To display mirror images
for special uses.
[ROTATE]
To display rotated images
for special uses.
Press MENU to display the Menu screen.
Press
~~ to select "OPTION".
Press A/T to select "PICTURE FLIP", and press
ENTER.
cc I
a •
BACKLIGHT I
0 •••
PIC.FLlPMENUREllJRN MENU
eo ••
Press PIC.FLlP to change the setting.
Press PIC.FLlP to display the PICTURE FLIP screen.
[PICTURE
FLIP [NORMAL] ------+PICTURE FLIP [MIRROR] J
PICTURE FLIP [UPSIDE DOWN] .... PICTURE FLIP [ROTATE]
[NORMAL]
Normal image
orientation.
[UPSIDE DOWN]
To display upside down
images for special uses.
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
Directly setting
the PICTURE FLIP
Press MENU to exit.
Press MENU to display the Menu screen.
Press
~~ to select "OPTION".
Press
A/T to select "NO SIGNAL OFF", and press
ENTER.
Press ~~ to select "OPTION".
Press MENU to display the Menu screen.
Press
A/T to select "NO OPERATION OFF", and
press ENTER.
NO OPERATION OFF
cc
a •
BACKLIGHT
0 •••
PIC.FLlP MENUREllJRN MENU
00 ••
Power control setting allows you to save energy.
When set to "ENABLE", the power will automatically shut
down if no signal inputs for 5minutes.
When set to "ENABLE", the power will automatically shut
down if there is no operation for 3hours.
INOTE ~
•"DISABLE" is factory preset value.
•This function can work only in TV mode.
•If interfered with by other broadcast or radio waves, "NO SIGNAL
OFF" may not work properly even when the broadcast is over.
I NOTE >
•"DISABLE" is factory preset value.
i
VQ@V
o AVMODE _
AUDIO ONLY 0 SLEEP
ICC
a <8
BACKLIGHT
0 •••
/00- ••
set the SLEEP TIMER, pressing POWER on the main
the remote control will cancel the SLEEP TIMER
~
DISPLAY \
o
®®
®®®
Q)®®
S LEE P T I ME R [0 F F )
Press ~~ to select "OPTION".
Press SLEEP to display the SLEEP TIMER screen.
Press
A/T to select "SLEEP TIMER", and press
ENTER.
Press SLEEP to set the sleep timer (in minutes).
C
[OFF] -- [30MIN] --- [60MIN] ~
[150MIN] - [120MIN] -- [90MIN] ~
(minutes)
• 5 before the SLEEP TIMER turns off the LCD TV,
"5 MIN REMAINING" is displayed on the screen for 4seconds.
The SLEEP TIMER counts down and shows asimilar 4-second .
display for each remaining minute until the timer turns off the LCD
TV set.
Setting the SLEEP TIMER on the Menu screen
Press MENU to display the Menu screen.
You can set the SLEEP TIMER to automatically turn off the
TV.
Directly setting the SLEEP TIMER
I NOTE ~
•The SLEEP TIMER screen automatically disappears in 3seconds.
Press MENU to display the Menu screen.
cc
a •
BACKLIGHT
0 •••
PIC.FLlP MENUREllJRN MENU
00 ••
Press ~~ to select "OPTION".
Press MENU to exit.
Press
JIJaIY to select "BLUE SCREEN", and press
ENTER.
Press A/T to select "ON", and press ENTER.
~
-
This function automatically turns the screen blue if no
broadcast signal is received.
INOTE ~
•When received signals are weak or interfered with by some other
signals, the BLUE SCREEN function may be activated. To watch
the TV under such conditions, set "BLUE SCREEN" to "OFF".
•The BLUE SCREEN function is activated when INPUT mode is
selected with no signal being input.

Connecting External Devices Troubleshooting
Check item
•Make sure the AC cord is properly inserted in the power outlet.
•Reception other than those
of broadcasting stations can be considered.
•Make sure the input
mode is set to TV.
•Make sure the POWER switch
of the main unit is on.
There is no
picture
or
sound.
Problem
•Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
i
I
I
I
------~--------------------------------1
BThere is no •Make sure the
BRIGHTNESS is properly adjusted. I
Fjj
icture picture. •Fluorescent lamp may have reached the end of service life.
There is no •Make sure the S-VIDEO terminal has nothing connected. i
picture from •Make sure the AUDIO ONLY is not set to ON. I
INPUT1/2/3 j
0- ·Make sure the volume is not set to minimum. I
NThere is no •Make sure the sound is not set to mute. I
Q " sound. I · Make sure that headphones are not connected. I
~ I
ll~u~:;~;tjU;_.~_1 __ ~~ __ I~_}_~_if_J_s~_1-+1_: _~_:_~_~_es_cu_: __ ;t_i~_hn_e_:_~u_t~_dn_~_:_t_C~_:_lp_er_~S_b_~_r~_p_. e_r_ly __ c_o_n_n_e_c_te_d_' · -~~-~~_'-_-l_1
~
I • Make sure the antenna cable is properly connected.
I/
N: Picture is II· Bad reception could be the problem.
,not clear.
~: -~--~~--------+---- ----.--l
Picture is I· Check color adjustment. I
light or I
improperly II
tinted. iI
I · Press the BACKLIGHT button, or set the BACKLIGHT or BRIGHTNEssl
The picture isettings. .i
is too dark. i · Check CONTRAST and BRIGHTNESS adjustment. I
I
,Remote control does not work.
II : :I~:~:~::n:~:::e:: ::V~e::~:::~::I~nd of se~ice life. ~
. • Make sure the remote sensor window is not under strong lighting.
~ ---+-II-.-E-x-te-r-n-al-i-n-fl-ue-n-c-e-S-S-U-C-h-a-S-Iig-h-t-n-in-g-,-s-ta-t-ic-e-I-e-ct-r-ic-it-y-, e-t-c-. ,-m-a'-y-c-a-us-e-
improper operation. In this case, operate the unit after first turning the
Unit cannot be operated.
power off the LCD TV set, or unplugging the AC cord and re-plugging it
in after 1
or 2minutes.
I
VCR
Audio amplifier
To INPUT3/0UTPUT terminal
~
qD)~~~~'lJIIIll:::JP AiJdio(L) I
Audio(R) I
IINPUT11 ;...To::......:.:.:IN~PU::..:T...:..1.:.::te;.:.;rm=ln.:.::;al:..-- __
Component cable ~ DVD player
oI:: : ~fY~Ur external device has acomponent
Audio (L) ~::~~~~c7e~7~~~~~ ~~r:~f~i~_~~~lity
pictures).
o
Audio cable
o
oIIINPUT21 ,-T_O _IN_PU_T_2 _ter_m_in_al -....
~ S-Video cable S-Video Home video
0. ·I m:J) mo:::Jg ---+ game system Camcorder VCR
IAudioNideocable •
::r=E
:~;:(L) I ~
~ * If your external device has an S-video
Audio (Rl •terminal, S-VIDEO connection is
recommended.
v@
L@ L@
R@ R@
INPUT2!f=
VIDEO @ @
S-VIDEOO·
INOTE ~
For the cable, use acommercially available audio/video cable.
PC connection is not possible.
For more information about external device connections, see the operation manuals of your external devices.
Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result in amalfunction.
INPUT2 has two terminals, VIDEO and S-VIDEO terminals. If your external device has an S-VIDEO terminal, S-VIDEO connection is
recommended. S-VIDEO provides afiner, more detailed picture. If both terminals are connected, S-VIDEO terminal takes apriority.
Only when
4801 or 480P signal is received through the INPUT1, picture can be displayed.
You can enjoy picture and sound by connecting aVCR or ahome video game system to the terminals located on the rear of
the main unit.
When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.
[" Outp~tting Video and Aud'io (Video Output) 'J
•You can output video and audio signals from the LCD TV set through the INPUT3/0UTPUT terminals.
When using INPUT3/0UTPUT as
an output terminal, select "SETUP" in the Menu and set "INPUT3 SELECT" to "OUT [(] FAO" or
"OUT
D~ FAO" .
INOTE ~
•When using the S-VIDEO input for INPUT2 or COMPONENT input for INPUT1, no video signal will be made to the INPUT3/0UTPUT
terminal, but audio signal wil be made for connection to external audio systems.

Troubleshooting (Continued) Dimensional DraWings
IAntenna I
LC·13SH6U I 15SH6U 120SH6U
Unit: inch (mm)
-
753/64(198.7) / 8
49
/64(222.2) I
1 9/'6 (39.7) / 37 /s (98.5) /
23/64(51.9) /3
27
132(97.5) /
1
57/
64
(47.9) 357/64 (99)
I
J ·.>·.·l
I
i···
<.
•Cautions regarding use in high and low temperature environments
•When the unit is used in alow temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not
amalfunction, and the unit will recover when the temperature returns to normal.
•Do not leave the unit in ahot or cold location. Also, do not leave the unit in alocation exposed to direct sunlight or near aheater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
-4 OF to +140°F (-20°C to +60°C)
Specifications
Problem [Check item I
I
I
•The reception may be weak. I
I
The picture is not sharp. •The quality of the broadcast may also be bad.
I
The picture moves. • Make sure the antenna
is facing the correct direction.
• Make sure the outside antenna is connected.
The picture is doubled or tripled. •Make sure the antenna is facing
th~ correct direction. i
•There may be reflected electric waves from mountains or buildings.
I•There may be interference from automobiles, trains, high-voltage lines, neon lights,
The picture is spotted. Ietc.
•There may be interference between the antenna cable and AC cord. Try positioning
them further apart.
•
Is the unit receiving interference from other devices? I
There are stripes on the screen Transmission antennas of radio broadcasting stations, transmission antennas of I
I
or colors fade. amateur radios and cellular phones may also cause interference. I
• Use the unit as far apart as possible from devices that may cause possible interference. I
ILC-13SH6U ILC-15SH6U ILC-20SH6U
Items
LCD panel 13" Advanced Super View I15" Advanced Super View
/20" Advanced Super View
&BLACK TFT LCD &BLACK TFT LCD &BLACK TFT LCD
Number of dots 921,600 dots VGA
Video color systems N358
TV Standard (CCIR) NTSC
TV Tuning System PLL 181 ch.
TV function STEREO MTS+SAP
CATV 125 ch.
Brightness 430 cd/m2
Lamp life (Fluorescent lamp) 60,000 hours·
Viewing angles
H: 170° V: 170°
Audio amplifier
1.0Wx2
Speakers 113
ho x 41 /3 in. (42 x110 mm), 2pes
INPUT1 COMPONENT-IN, AUDIO-IN
INPUT2 VIDEO-IN, S-VIDEO-IN, AUDIO-IN
Terminals INPUT3/0UTPUT VIDEO-IN, AUDIO-IN /VIDEO-OUT, AUDIO-OUT
Antenna F-Type
Headphone Mini-jack for stereo (03.5 mm)
OSD language English/Spanish/French
Power supply AC 120V, 60Hz
Power consumption
43 W(0.8 Wstandby): AC 120V I50 W(0.8 Wstandby): AC 120V I 71 W(0.8 Wstandby): AC 120V
Weight Display only 8.0 Ibs./ 3.6 kg I
9.1 Ibs./ 4.1 kg
\14.1 Ibs.l6.4 kg
Display with stand
9.1Ibs./ 4.1 kg I10.2 Ibs./ 4.6 kg 116.1 Ibs./ 7.3 kg
Operating temperature +32°F to +104°F
(O°C to +40°C)
13/64(26.4)/
1
39
/64(40.7)/
215/32(62.6)
•Typical time for power output decrease of about one-half assuming continuous use in aroom with normal lighting, normal brightness and
temperature at 77°F/25°C
•As apart of policy
of continuous improvement, SHARP reserves the right to make design and specification Changes for product improve-
ment without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some
deviations from these values in individual units.

Calling'for''''Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer
assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITEDWARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when shipped
in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect
or replace the defective Product or part thereof with anew or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items ofthe Product norto the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged
or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer. .
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITEDTOTHE PERIOD(S) FROM THE
DATE OF PURCHASE SETFORTH BELOW. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized
to make any warranties other than those
described herein,
or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction
of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment ofall liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction ofall claims, whether based on contract, negligence, strict liability
or otherwise.
In no event shall Sharp be liable,
or in any way responsible, for any damages or defects in the Product which were caused
by repairs
or attempted repairs performed by anyone other than an authorized servicer. Norshall Sharp be liable or in any
way responsible for any incidental or consequential economic
or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model Specific Section
your Product Model Number & Description:
Warranty Period for this Prodyct:
Additional Item(s) Excluded from
Warranty Coverage (if any):
Where to Obtain Service:
What to do to Obtain Service:
LC-13SH6U/LC-15SH6U/LC-20SH6U
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and ninety (90) days labor from the date of
purchase.
Non-rechargeable batteries.
From aSharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid
or carry in your Product to aSharp Authorized
Servicer. Be sure to have Proof
of Purchase available. If you
ship the Product, be sure it is insured and packaged securely.
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP ORVISITwww.sharpusa.com
SHAR~
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION

PRODUCT REGISTRATION DEPARTMENT
Please do not send any products or other correspondence to this address.
If you have comments or suggestions about our product, please write to:
SHARP ELECTRONIC CORPORATION
TV Marketing Department
Sharp Plaza, Mahwah, NJ 07430-2135 U.S.A.
Visit our website at http://www.sharpusa.com
MLH01-01
II, III
First-Class
Postage
Required
Post Office will
not deliver
without proper
postage.
SHAR~
POBOX 171098
DENVER CO 80217-1098
11 •• 1.11 ••••• 1.1 ••• 11111.1 ••• 1111 ••• 1.1 •• 1 •• 111.1 •• 1 •• 1.1.1.11

SHAR~
IMPORTANTI IMPORTANTI
Please complete and"feturn within the next 10 days!
Or register ONLINEatwww.sharpusa.com
1.1. ,0 Mr.
First Name
2. 0 Mrs.
3.0 Ms. 4. 0 Miss
Initial Last Name
MLH01·01
TV
Street
ApI. No.
City
State
ZIP Code
E-mail Address:
yrs.
1.0 2.0
yrs.
1.0 2.0
13. What other brands of TVs did you seriously consider' before selecting this
Sharp product?
01. 0 No Other Brands Considered 12. 0 Apex
02. 0 RCA 13. 0 Toshiba
03. 0 Zenith 14. 0 Sanyo
04. 0 Sony 15. 0 Fisher
05. C Hitachi 16. 0 JVC
Go. 0 GE 17. 0 Advent
07. 0 Sylv~nia 18. 0 Emerson
08. 0 Magnavox 19. 0 Philips .
09. 0 Panasonic 20. 0 Mitsubishi
10. 0 KLH 21. 0 Samsung
11. 0 LG Electronics 22. 0 Other
14., Not inclUding yourself, what is the GENDER and AGE (in yearS) of children ~md
other adults living in your household?
1. 0 No one else in household 2. 0 Child under 1 year
Male Female Male Female Age
Year
2. 0 Single
Year
Day Month
2. Your date of birth:
4. Date of purchase:
Month
3. Marital status: 1. 0 Married
5. Model number:
6. Serial number:
(on back of unit)
7. Did you purchase an extended service plan for this product?
1. 0 Yes 2. 0 No
8. Where did
PLEASECONTINUE ON BACK ~. ~ ~
17. Which group describes your annual family income?
01. 0 Under $15,000 08. 0 $75,000-$99,999
02. 0 $15,000-$19,999 09. 0 $100,000-$124,999
03. 0 $20,000-$29,999' 10. 0 $125,000-$149,999
04. 0 $30,000-$39,999 11. 0 $150,000-$174,999
05. 0 $40,000 .. $49,999 12. 0 $175,000-$199,,999
06. 0 $50,000-$59,999 13. 0 $200,000-$249,999
07. 0 $60,000-$74,999 14. 0 $250,000 & over
18. Level of education: (check highest level completed)
1. 0 Completed High School
2. 0 Completed College
3. 0 Completed Graduate School
19. Which credit cards do you use regularly?
1. 0 American Express, Diners Club
2. 0 MasterCard, Visa, Discover
3. 0 DepartmentStore, Oil Company, etc.
4. 0 Do not use credit cards
1.0 2.0
15. Occupation: (check all that apply) You
ProfessionallTechnical......... 0
Upper Management/Executive 0
Middle Management :..................... 0
Sales/Marketing.. 0
Clerical/Service Worker 0
Tradesman/Machine Operator/Laborer 0
16. Are you or your spouse: You
A Homemaker? 0
Retired?.................................................. 0
A Student? 0
Self Employed/Business Owner? 0
Working from a Home Office? 0
In the Military? 0
A Veteran? [j
yrs.
Spouse
1. 0
2. 0
3. 0
4. 0
5. 0
6. 0
Spouse
1. 0
2. 0'
3. 0
4. 0
5. D
6. []
7. 0
yrs.
1.0 2.0
9. Where did you first learn about this Sharp product? (check only one)
1. 0 Salesperson 5. 0 In-Store Display
2. 0 Friend/Relative 6. 0 Retailer's Ad
3. 0 Magazine Article or Review 7. 0 Product Carton
4. 0 Sharp ~ebsite 8. 0 Other
1 o. What were the two most important factors that influenced your selection
of this product?· (check up to two)
01. 0 Sharp reputation 08. 0 Durability
02. 0 Prior experience with Sharp 09. 0 Portability
03. 0 Style/Appearance 10. 0 Recommended by
04. 0 Unique features a friend/relative
05. 0 PriceNalue 11. 0 Recommended by
06. 0 Product size a salesperson
07. 0 Warranty 12. 0 Other
11. Please check the location where this unit will be used.
1. 0 Living Room ' 6. 0 Basement
2. 0 Adult's Bedroom 7. 0 Home Office
~. 0 Child's Bedroom, 8. 0, Mobile HomelTrailer
4. 0 Family/Rec'Room, 9. '0 Other
5. 0 Kitchen
12. Which of the following products do you currently own or intend to purchase
within the next 6 months? (A) (B)
Currently Own Intend to Buy
Digital Television 0 01. 0
TV Larger Than 2r 0 02. 0
LCD Television 0 03. 0
Projection TV 0 04. 0
Combination TV 0 05.' 0
Camcorder 0 06. 0
Digital Satellite~ ~...................... 0 07. 0
LCD Projector 0 08. 0
Dolby Digital (AC-3) Audio System 0 09. 0
Home Theater Audio System...................... 0 10. 0
(PVR) Personal Video Recorder......... ......... 0 11. 0
HDTV Receiver............................................ 0 12. 0
Wireles.s Video Receiver 0 13. 0

Please fold here.
20. For your primary residence, do you:
1. 0 Own? 2. 0 Rent?
21. How recently did you inove into your current residence?
1. 0 Within 30 days· 4. 0 7 to 12 months ago
2: 0 Within 1- 3 months 5. 0 Have not moved in
3. 0 Within 4- 6 months the last 12 months
22. Which of ·the following do you plan to do within the next 6 or 12 months?
1·6 7·12
Months Months
Buy/Lease a New Vehicle 0 1; 0
Buy/Lease a Used Vehicle ~...... 0 2. .0
I'
23. Please ch~ckaU that apply to your household.
01. 0 Shop by Catalog/Mail
02. 0 Shop via the Internet
03. 0 Member of Frequent Flyer Program
04. 0 Donate to Charitable Causes
05. 0 Own a Compact Disc Player
06. D Have a Dog
07. 0 Have a Cat
08. 0 Own a Wireless/Cellular Phone
09. 0 Subscribe to an Online/Internet Service
10. 0 Speak Spanish
11. 0 Own an Apple/Macintosh Computer
12. 0 Own a CD-ROM Drive
Thanks for taking the time to fill out this questionnaire. Your answers will be used·for market
research· studies and reports. They will also allow· you to receive important mailings and
special offers from a number of fine companies whose· products and services relate directly
to the specific interests, hobbies, and other information indicated above. Through this
selective program, you will be able to obtain more information about activities in which you
are involved 'and less about those in which you are not. Please chec.k here if, for some
reason, you would prefer not to participate in this opportunity. 0
Pailure to return this card will not diminish your warranty rights.
Part Code: TCADEA141WJZZ
• Copyright @',2004 All Rights Reserved
•
24. To help us understand our customers' lifestyles, please indicate the interests and
activities in which. you or your spouse enjoy participating on a regular basis.
01. 0 Bicycling 26. 0 Health/Natural Foods
02. 0 Golf 27. 0 Photography
03. 0 Physical Fitness/Exercise 28. 0 Cultural/Arts Events
04. 0 Running/Jogging 29. 0 Fashion.Clothing
05. 0 Snow Skiing 30. 0 Art/Antique Collecting
06. 0 Tennis 31. 0 Foreign Travel
07. 0 Camping/Hiking 32., 0 Cruise Ship Vacations
08. 0 Fishing 33. 0 Travel in USA
09. 0 Hunting/Shooting 34: 0 Gourmet Cooking/Fine Foods
10. 0 Powerboating 35. 0 Wines
11. 0 Sailing 36. 0 Stamp/CoinCollecting
12. 0 Grandchildren 37. 0 Collectibles
13. 0 Needlework/Knitting 38. 0 Our Nation's Heritage
14. 0 Sewing 39. 0 Real Estate Investments
15. 0 Flower Gardening 40.' 0 Stocks/Bond Investments
16. 0 Vegetable Gardening 41. 0 Contests/Sweepstakes
17.. 0 Crafts . 42. 0 Casino Gambling
18. 0 Buy Prerecorded Videos 43. 0 Science Fiction
19. 0 Automotive Work 44. 0 Wildlife/Environmental Issues
20. 0 Electronics 45. 0 DietinglWeight Control
21. 0 Home Workshop/Do-It- 46. 0 Sc"ience/New Technology
Yourself 47. 0 Self-Improvement
22. 0 Recreation Vehicles (RV's) 48. 0 Walking for Health
23. 0 Listen to RecordslTapes/CDs 49. 0 Watching Sports on TV
24. 0 Avid Book Reading 50. 0 Home Video Recording
25. 0 Bible/Devotional Reading 51. 0 Moneymaking Opportunities
25. Using the numbers in the above list, please indicate your 3 most
~~portant activities:
Printed in China
Please seal w.ith tape. Do not staple.