Sharp SJ-WX830F User manual

“Plasmacluster” and “Device of a cluster
of grapes” are trademarks of Sharp
Corporation.
“Plasmacluster” et “Device of a cluster of
grapes” sont des marques commerciales de
Sharp Corporation.
SJ-WX830F
ES Índice
• Información de seguridad....................................... ES-1
• Instalación ...............................................................ES-3
• Descripción..............................................................ES-4
• Almacenamiento de alimentos ................................ES-6
• Panel de control ......................................................ES-7
• Modos principales ...................................................ES-8
• Espacio multitemperatura......................................ES-11
• Ajustes adicionales................................................ES-13
• Dispensador automático de hielo ..........................ES-15
• Dispensador de agua ........................................................................ ES-18
• Cuidado y limpieza ................................................ES-20
• Antes de llamar al servicio técnico ........................ES-21
• Ficha del producto.................................................ES-23
EN Contents
• Safety information ................................................. EN-1
• Installation .............................................................. EN-3
• Description ............................................................. EN-4
• Storing food ............................................................ EN-6
• Control panel .......................................................... EN-7
• Main modes............................................................ EN-8
• Multi temperature room ........................................ EN-11
• Additional settings ................................................ EN-13
• Automatic ice maker............................................. EN-15
• Water dispenser .................................................. EN-18
• Care and cleaning ................................................ EN-20
• Before you call for service .................................... EN-21
• Product FICHE ..................................................... EN-23
FR Table des matières
• Information de sécurité........................................... FR-1
• Installation ...............................................................FR-3
• Description ..............................................................FR-4
• Conservation des aliments ......................................FR-6
• Panneau de contrôle ...............................................FR-7
• Modes principaux ....................................................FR-8
• Compartiment multi-température...........................FR-11
• Paramètres additionnels........................................FR-13
• Machine à glaçons automatique............................FR-15
• Distributeurs d'eau.................................................FR-18
• Entretien et nettoyage ...........................................FR-20
• Avant d'appeler le service après vente..................FR-21
• Fiche du produit.....................................................FR-23
DE Inhalt
• Sicherheitshinweise................................................ DE-1
• Aufstellung.............................................................. DE-3
• Beschreibung ......................................................... DE-4
• Aufbewahrung von Lebensmitteln .......................... DE-6
• Bedienfeld .............................................................. DE-7
• Hauptmodi .............................................................. DE-8
• Multi-Temperaturfach ........................................... DE-11
• Zusätzliche Einstellungen..................................... DE-13
• Automatische Eiswürfelmaschine......................... DE-15
• Wasserspender .................................................... DE-18
• Wartung und Reinigung........................................ DE-20
• Ehe Sie sich an den Kundendienst wenden......... DE-21
• Produktdatenblatt ................................................. DE-23
IT Contenuti
• Informazioni sulla sicurezza .................................... IT-1
• Installazione ............................................................. IT-3
• Descrizione............................................................... IT-4
• Conservare alimenti ................................................. IT-6
• Pannello di controllo ................................................. IT-7
• Modalità principali..................................................... IT-8
• Sala multitemperatura ............................................ IT-11
• Impostazioni addizionali ......................................... IT-13
• Macchina automatica per ghiaccio ......................... IT-15
• Erogatore d'acqua .................................................. IT-18
• Manutenzione e pulizia........................................... IT-20
• Prima di contattare l'assistenza.............................. IT-21
• Fiche del prodotto................................................... IT-23

EN-1
EN
Thank you very much for buying this SHARP product. Before using your SHARP
refrigerator, please read this operation manual to ensure that you gain the maximum
benet from it.
• This refrigerator is intended for making ice cubes, refrigerating and freezing food.
• This refrigerator is for household use only, with ambient temperature indicated in
the table. The climate class is specied on the rating plate.
The refrigerator is fully functional at the ambient temperature range of the indicated
climate class. If the refrigerator is used at colder temperatures, the refrigerator will
not be damaged up to a temperature of +5°C.
• The refrigerator should not be subjected to temperatures of -10°C or below for a
long period of time.
Refrigerant
This refrigerator contains ammable refrigerant (R600a:
isobutane) and insulation blowing gas (cyclopentane).
Observe the following rules to prevent ignition and
explosion.
■Do not allow any pointed objects to have contact with
the refrigeration system. The refrigeration system
behind and inside the refrigerator contains refrigerant.
■Do not use mechanical devices or other means to
accelerate the defrosting process. (This refrigerator has
adopted automatic defrosting system.)
■Do not use electrical appliances inside the refrigerator.
■Do not block the space around the refrigerator.
■Do not use ammable sprays, such as spray paint near
the refrigerator.
■Do not store ammable sprays, such as spray paint in
the refrigerator.
■In the case of failure of the refrigeration system, do not
touch the wall socket and use open ames.
Open the window and let out the air from the room.
Then ask a service agent approved by SHARP for
service.
Installation
■Do not install the refrigerator in a damp or wet location.
It may cause the damage to the insulation or electrical
leak. Dew may also appear on the outer cabinet and it
causes rust.
■The refrigerator should be installed atly and rmly on
the oor.
Power cord, Plug, Socket
Read carefully the following rules to prevent electric
shock or re.
■Connect the power plug into the wall socket rmly and
directly. Do not use an extension cord or adapter plug.
■Connect the power plug to the socket with the required
rated voltage.
■Connect the earth pin to the earth terminal properly.
■Make sure to protect the power cord from being
damaged during installation or moving. If the power
plug or cord is loose, do not insert the power plug.
■Do not touch the power plug with wet hands.
■Disconnect from the main electricity supply by removing
the main plug from the socket.
Do not remove by pulling the power cord.
■Dust deposited on the power plug may cause re.
Wipe it off carefully.
■Pull out the plug if the refrigerator is not used for a long
time.
■
If the exible supply cord become damaged, a special
cord is required and it must be replaced by a service
agent approved by SHARP, in order to avoid a hazard.
In use
■Do not store explosive substances such as aerosol
cans with a ammable propellant in this appliance.
These materials are easy to explode.
■Do not store temperature-sensitive products such as
pharmaceutical products in the refrigerator.
There are high risks of changes in product quality .
■Do not attempt to change or modify this refrigerator.
This may result in re, electric shock or injury.
■Do not place any object on the top of refrigerator.
If the object falls down from the top, it may cause injury.
■Do not touch the machinery parts (upper section of
the ice storage box) of the automatic ice maker. Bodily
injury may occur as result when the ice tray turns.
■Do not hit the glass doors hard.
Otherwise, they may break and cause physical injury.
■Do not touch the dispenser door when it is rotating. If
you catch your ngers in the door, it may cause injury.
■
This appliance can be used by children aged from 8
years or above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way or understanding the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be done by children without
supervision.
Climate
class Acceptable range of ambient temperature
SN +10°C to 32°C
N +16°C to 32°C
ST +16°C to 38°C
T +16°C to 43°C
Safety information
Warning This means that there are high risks of death or serious injury.
Caution This means that there are high risks of material damage or personal injury.
Warning
Household use only

EN-2
Care and Cleaning
■Unplug the refrigerator rst to prevent electric shock.
■Do not splash water directly on the outer cabinet or the
interior. This may lead to rusting and deterioration of
the electrical insulation.
Trouble
■If you smell something burning, pull out the power plug
immediately. Then ask a service agent approved by
SHARP for service.
■In case of gas leak, ventilate the area by opening
window. Do not touch the refrigerator or the power
socket.
Disposal
■Ensure that the refrigerator presents no danger to
children while being stored until disposal. (e.g. remove
the magnetic door seals to prevent child entrapment.)
■This refrigerator should be disposed appropriately.
Take the refrigerator to a professional recycling plant
for ammable refrigerant and insulation blowing gases.
Transportation
■When you install or move your refrigerator, use curing
mat to protect the oor from being damaged.
■Carry the refrigerator by holding the handles located on
the rear and bottom side. If you lift up the refrigerator
improperly, it may cause injury.
Caution
In use
■Do not touch food or metal containers in the freezer
compartment with wet hands. This may cause frostbite.
It is exactly the same when multi temperature room is
set at -8°C or -18°C.
■Do not place bottled drinks and cans in the freezer
compartment.
It is exactly the same when multi temperature room is
set at -8°C or -18°C.
■Do not use other than potable water to make ice cubes.
■Do not open or close the door when somebody put
a hand near the door. There is a risk that the other
people may catch their ngers in the door.
■Do not put oversized object in the pockets of the door.
If the object falls down from the pockets, it may cause
injury.
■Make sure to handle the glass shelves with care to
install or uninstall. If you drop the glass shelves, it may
break or cause injury.
Safety information
rear bottom
Rear Bottom

EN-3
EN
1Keep adequate ventilation space around the refrigerator.
• The picture shows the minimum required space
for installing the refrigerator. The measurement
condition of energy consumption is conducted
under a different space dimension.
• By keeping greater space, the refrigerator may
consume a less amount of power consumption.
• If use the refrigerator in the smaller space
dimension than pictured above, it may cause
temperature rise in the unit, loud noise and failure.
Overall space required in use
Installation Free standing type
2Use the two front the adjustable feet to place the refrigerator atly and rmly on the oor.
3Use the adjustable feet when right and left doors are not properly aligned.
Adjustable foot
Note
• Place your refrigerator to access the plug.
• Keep your refrigerator out of direct sunlight and do not
place next to heat generating appliance.
• Do not place your refrigerator directly on the ground.
Insert suitable stand such as wooden board under the
refrigerator.
• When you insert the power plug with the door opened,
door alarm sounds but it is normal. This sound stops
after closing the door.
Four casters are located on the bottom
of the refrigerator.
• The casters allow the refrigerator to
move back and forth.
Before using your refrigerator
• Clean the inside parts with a cloth soaked in warm
water.
• If you use soapy water to clean, wipe it off thoroughly
with water.
1028mm 846mm
90mm
60mm 50mm
When the left door are
raised. When the right door are raised.
Lower the foot
at right side. Lower the foot
at left side.
• Turn the adjustable feet until the opposite foot is
slightly off from the ground.
Casters
4Connect the appliance via a correctly installed socket.
1330
1440

EN-4
1. Door pocket
2. Refrigerator shelf
3. 9 way shelf (See the next page.)
4. Fixed shelf
5. Vegetable case
Moisture cover is installed on the right side only.
This cover works for storing food with high-moisture
freshly.
Moisture cover (Unremovable)
Fixed shelf Vegetable case
6. Egg holder
7. Fresh case
8. Water tank (Ice maker)
9. Dispenser tank
10. Case
11. Stainless steel tray
12. Ice storage box
To prevent damage to the ice storage box, do not
make ice in the ice storage box or pour oil into it.
13. Freezer shelf
Description
14. Freezer case
15. Light
16. Plasmacluster indicator
17. Hybrid cooling panel
The panel cools the refrigerator compartment
indirectly from the rear. In this way, food is cooled
gently without being exposed to cold air ow.
18. Control panel
19. Motion sensor (See the next page.)
20. Water dispenser
21. LED Indicator
The light reacts differently by opening refrigerator
door, freezer door (left) or using control panel. The
pattern of lighting depends on the preset temperature
of multi temperature room or operating mode.
If you wish to store large items within your
refrigerator
• You may remove any shelves or any pockets numbered
1, 2, 3, 5, 6, 7, 8, 10, 11, 12, 13, 14 in the picture above.
• Cooling performance is not inuenced even if you use
the refrigerator in the above situation.
20
18
19
21
1
8
6
1
5
7
9
12
14
10
13
11
2
1517
1615
15 154
3

EN-5
EN
Description
9 way shelf
• There are nine ways to use this shelf.
Tall food
Large food with depth
• You can use the left side shelf in the same way.
Note
•
Do not take off only one side of the shelf from the
partition.
Fixed partition becomes unstable and it may fall down.
•
Do not apply weight on the xed partition by leaning
food, etc.
The shelf may not move correctly and it may fall down.
•
Do not place food only at the back side of the shelf,
when the front shelf is pushed in. (Because the shelf
may rotate)
•
Do not use the shelf
with the front shelf half-way
on the rail.
(It may fall down from the rail)
Pull it out until it
engages to the tab.
Lift the front part
of the shelf up and
push it in.
Bring the shelf up to
the back.
Fixed partition
Rail
Tab
Motion sensor
• The control panel and LED indicator light up
automatically when the sensor detects your motion.
(Including pets.)
• If your motion has not been detected, the control panel
turns off in approximately 1 minute.
• This sensor detects the changes in infrared (heat).
The control panel lights up when the sensor detects the
change even though you are not around. The sensor
does not react if you stay still in front of it.
• Motion sensor is located at the bottom of the left side
refrigerator door. The sensor may not react depending
on your standing position or temperature differences
between ambient temperature and body temperature.
• The sensor may not react when illuminated with direct
sunlight.
Detection area
• Detection area is shaded part below.
The sensor reacts when you approach the area within
approx. 50cm from the refrigerator.
Door Alarm
• The door alarm sounds when the door* is left open.
• The door alarm sounds in 1 minute after opening the
door and again after 1 minute (once in each case).
• If the door* is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after closing all the door.
(*Only refrigerator door and left freezer door.)
Deodorizing unit
• Deodorizing catalyst is installed on the routes of cold air.
No operation and cleaning are required.

EN-6
Multi temperature room
You can choose from four kinds of temperature
zones. See “Multi temperature room” about how
to select the temperature zone.
Temperature
zone Mode Storing food
Refrigerating Drinks, Daily dish
Dessert etc.
Fresh Meat, Fish
Daily product etc.
Soft freezing Meat, Fish etc.
Freezing Frozen food
Soft freezing
This mode is suitable for storing food without freezing solid.
You may cut easily even if the food is big.
If the food is hard to cut, leave it for ve to fteen minutes
on a cooking board then try again.
Please note that this mode is not designed for long-term
storage of frozen food.
Stored food should be used within 1 week.
Advice for preventing dew or
frost inside the refrigerator
• Keep the door securely closed. If the food falls down,
it may cause a gap between the cabinet and the door.
Move it back to the shelf or the pocket.
• Stored items should be packed or sealed with such as
food containers or plastic wraps.
Advice for storing food
• Evenly place the food on the
shelves to allow the cooling air
to circulate efciently.
• Hot food should be cooled
before storing. Storing hot food
increases the temperature in
the unit and the risk of food
spoilage.
• Do not block the outlet and
inlet of the cool air circulating
circuit with food or containers;
otherwise the food is not be
evenly cooled throughout the
refrigerator.
• Do not place food directly in
front of cold air outlet. This
may lead to the food freezing.
Storing food
• Ensure that the food is of the freshest possible quality
to maximize the storage life of perishable food. The
following is a general guide to help promote longer food
storage.
• Food has a limited storage life. Make sure not to exceed
use-by date indicated by manufacturer.
Refrigerator
Fruit / Vegetables
• Fruit and vegetables should be loosely
enclosed in a plastic material e.g. wrap,
bags (do not seal) and placed in the vegetable case to
minimize moisture loss.
• Fruits and vegetables which are easily effected by low
temperature should be stored in a cool place except for
the refrigerator.
Dairy Products & Eggs
• Most dairy products have their best-before date on
the outer packaging which informs the recommended
temperature and storage life of the food.
• Eggs should be stored in the egg holder.
Meats / Fish / Poultry
• Place on a plate or a dish and cover with paper or
plastic wrap.
• For larger cuts of meat, sh, or poultry, place to the rear
of the shelves.
• Ensure all cooked food is wrapped securely or placed in
an airtight container.
Fruits, Vegetables,
Eggs Fruits,
Vegetables
Meat, Fish,
Poultry etc.
Vegetables are improper
in these cases.
They may be frozen.
Freezer
• Freeze small quantities of food at a time in
order to freeze them quickly.
• Food should be properly sealed or covered tightly.
• Place food in the freezer evenly.
• Label bags or containers to keep an inventory of
freezing food.
IN
OUT

EN-7
EN
Control panel
Compartment select key
Select key
Press to select ON/OFF of each mode or temperature setting.
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
(See the next page)
Temperature display
For indicating preset temperature or
ON/OFF of each mode.
Enter key
For entering the setting.
Icons
All modes are “OFF” by a default setting.
Main modes
Energy saving Vacation mode
Express Freezing Plasmacluster
Ice making Ice tray cleaning
Multi temperature room assisting modes
Express cool Extra cool
Defrost food Cool down
Additional settings
Water dispenser
lock Door alarm off
Sound off Control panel lock
Motion sensor off
LED indicator off
At the time of re-power distribution
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See “Multi temperature room” about the assisting mode.
• The other settings are the same as before the power
failure.
To light up the control panel
When you approach to the refrigerator, the motion sensor
reacts to it and control panel lights up automatically.
(If the control panel does not light up, press the enter
key.)
The control panel shows the preset temperature of each
compartment and the operating icons.
(All icons do not turn on because all modes are “OFF”
by a default setting.)
*
< Standby display >
* The temperature is not indicated on the display while
one of assisting modes in operation.
Note
• Press the keys with your bare hand to operate.
Operation with wet hand is invalid.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
automatically returns to the standby display. Thus if
there is no operation for another 1 minute after you step
away from the refrigerator the display turns off.
(The display does not turn off while the motion sensor is
ON.)
• Every time you open the door*, the control panel lights
up to show the current setting.
(* Only refrigerator door and left freezer door.)

EN-8
Main modes
Controlling temperature
• The refrigerator controls its temperature automatically.
You can set the preset temperature as below.
• See “Multi temperature room” about the preset
temperature of multi temperature room.
Refrigerator
• Default setting is 3°C.
• You can adjust between 0°C and 6°C in step of 1°C.
Procedure Display
1
Press enter key.
2
Select the
compartment. Current setting
The compartments change in the order shown as
on the picture by pressing this key.
→ → →
3Decrease Increase
IncreaseDecrease
Set the temperature.
4
Press enter key.
Freezer
• Default setting is -18°C.
• You can adjust between -13°C and -21°C in step of 1°C.
Procedure Display
1
Press enter key.
2
Select the
compartment. Current setting
The compartments change in the order shown as
on the picture by pressing this key.
→ → →
Advanced setting
• You can adjust the temperature in steps of 0.5°C in the
following way at procedure 3.
E.g. Refrigerator
Procedure Display
3Increase
Decrease IncreaseDecrease
Set the temperature.
• The temperature that indicated on the control panel
is not the exact temperature inside.
• The internal temperatures could be affected by such
factors as the location of the refrigerator, ambient
temperature and the frequency of door opening.
Temperature rise sign
If the inside temperature becomes as follows, this sign
lights up.
Refrigerator : more than 10°C
Freezer : more than -10°C
• Check the quality of food before you eat.
• This sign may light up at start of power supply.
This sign turns off by opening or closing the door of
lighted compartment of compartment select key when
this sign is ON.
3
or
Decrease Increase
IncreaseDecrease
or
Set the temperature.
4
Press enter key.
Set the
temperature
again.
Note

EN-9
EN
Main modes
Energy saving
• Use this mode to switch the appliance to energy-saving
operation.
How to operate
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows OFF.)
3
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
4
Press enter key.
• While this mode is operating, the temperature inside
of the refrigerator and freezer compartment becomes
higher than the normal operation as follows. The
displayed temperature is not be changed.
Under “Energy
saving” mode
Freezer Refrigerator
Approx. 2°C plus Approx. 1°C plus
(When the temperature is set at F: -18°C, R: 3°C.)
• Cancel this mode if you feel the beverages are not
cooled enough or ice making takes longer time.
Note
• The efciency of power saving depends on the
usage environment (controlling temperature, ambient
temperature, frequency of opening the doors, amount of
food).
Vacation mode
• Use this mode when going on a trip or leaving the house
for a long time.
• The temperature inside the refrigerator compartment is
adjusted to approx. 10°C.
How to operate
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows OFF.)
3
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
4
Press enter key.
Note
• Food storage period in the refrigerator compartment
becomes approx. 1/2-1/3 of normal operation.
Use this mode only when there is no perishable food.
• Temperature of refrigerator compartment cannot be
modied. (“10°C” is indicated on the display.)
< Standby display >
Tips for saving energy
• Install the refrigerator in a well-ventilated area and keep
the space to ventilate.
• Keep your refrigerator out of direct sunlight and do not
place it next to heat generating appliance.
• Avoid opening the door as much as possible.
• Hot food should be cooled before storing.
• Place the food evenly on the shelves to allow the cool
air to circulate efciently.
• The amount of energy consumption of this model is
measured as shown in the picture below.
90mm 50mm
300mm300mm

EN-10
Main modes
Plasmacluster
The ionizer inside your refrigerator releases clusters of
ions which are collective masses of positive and negative
ions, into the refrigerator compartment.
These ion clusters inactivate airborne mold fungus.
How to operate
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows OFF.)
3
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the
icon.
4
Press enter key.
Note
• There may be a slight odor in the refrigerator. This is the
smell of ozone generated by the ionizer. The amount
of ozone is minimum and quickly decomposes in the
refrigerator.
Express freezing
This mode is to freeze food quickly not to lose its avor.
Most moisture inside the food freeze between -1°C - -5°C.
It is important to accelerate the freezing speed to reach
-5°C for making high-quality frozen food.
How to operate
Procedure Display
1Put the food.
2
Press enter key.
3
Press icon. Current setting
(This indication shows OFF.)
4
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the
icon.
5
Press enter key.
Express Freezing ends automatically in
approx. 2~4 hours. (The icon turns off.)
Note
• Large food cannot be frozen in a single operation.
• Express Freezing may require more than 4 hours when
the operation overlaps with defrosting of the cooling unit.
The operation starts after defrosting is completed.
• Avoid opening the door as much as possible during
operation of this mode.
• The operating sound may become louder than usual
while this mode is ON but it is normal.
Tips for the best freezing
• Pack foods into freezer bags or put them in sealed
containers to avoid freezer burn which is a dry spot on
foods.
To help foods freeze faster, pack them in thin layers.
• Lay them at into the freezer case under the ice storage
box.
• If you wish to freeze large items, you may remove the
freezer case and spread them out on the freezer shelf.
mold
fungus
The indicator (blue) in
the refrigerator turns on.

EN-11
EN
Multi temperature room
You can choose from four kinds of temperature zones. (3°C, 0°C, -8°C, -18°C).
This room has four different assisting modes.
Temperature zone
• Default setting is -18°C.
• See “Storing food” about suitable food for each
temperature zone.
How to select
Procedure Display
1
Press enter key.
2
Select the
compartment. Current setting
The compartments change in the order shown as
on the picture by pressing this key.
→ → →
3
or
Select
temperature zone. Temperature zones change in the order shown as below
by pressing . ( :
Reverse)
4
Press enter key.
Assisting modes
• See the next page about operation procedure.
• All assisting modes end automatically.
The temperature is set at 0°C or 3°C automatically.
(See the next page.)
• The mode of express cool, extra cool, defrost food and
cool down can not be in operation at the same time.
Mode Feature
Effect / Note
This mode is to cool beverages or
food quickly.
Express
cool
This mode is to cool beverages or
food to ice-cold.
Extra cool Food with high-moisture may freeze.
This mode is to defrost frozen food.
Defrost food This mode is very convenient to
defrost food slowly.
Make sure not to defrost perishable
food completely to keep its avor or
nutrient.
Cool down
This mode is to cool down hot food
• When you want to cool down high-
temperature uid food, make sure to
keep it tightly covered or use an airtight
container.
Otherwise it may cause burn injury.
• Do not store the container which the
temperature of its outer surface is 60°C
or higher. Multi temperature room case
may become deformed by that heat.
Note
• Avoid opening the door as much as possible during the
operation.
• All assisting modes stop in the event of a power failure.
The temperature is set to the ending temperature of
each mode after recovery from the power failure.
Notes for multi temperature room
• Move all food to other compartment when you want to
use the assisting modes.
• Wait 30 minutes at least after changing temperature
zone (-8°C or -18°C). The temperature of multi
temperature room is not changed immediately.
• Do not put salt-containing food on the stainless tray
directly. Stainless tray may rust.
• Food with strong smell should be wrapped or stored in
airtight container tightly. Otherwise the strong smell may
be spreading to other compartment.
Note
• The temperature that indicated on the control panel is
not the exact temperature inside.
• All temperature zones are unadjustable.
• When multi temperature room set at -18°C, its
temperature varies depending on the setting of
freezer.
• The internal temperatures could be affected by such
factors as the location of the refrigerator, ambient
temperature and the frequency of door opening.

EN-12
Multi temperature room Assisting modes
To select mode
21 3
Press enter key. Select multi temperature room. Assisting mode icons turn on.
Move to procedure 4
of each mode.
Express cool
Procedure Display
4
Press icon. Current setting
(This indication shows OFF.)
5
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
6
Press enter key.
Operating time Approx. 60 minutes
Temperature setting inside
after completion of this mode 3°C
Extra cool
Procedure Display
4
Press icon. Current setting
(This indication shows OFF.)
5
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
6
Press enter key.
Operating time Approx. 60 minutes
Temperature setting inside
after completion of this mode 0°C
*1
*1
Defrost food
Procedure Display
4
Press icon. Current setting
(This indication shows OFF.)
5
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
6
Press enter key.
Operating time Approx. 6 hours
Temperature setting inside
after completion of this mode 3°C
Cool down
Procedure Display
4
Press icon. Current setting
(This indication shows OFF.)
5
Press icon again. The setting is changed.
• ON / OFF switches in the order by pressing the icon.
6
Press enter key.
Operating time Approx. 30~90 minutes
Temperature setting inside
after completion of this mode 3°C
*2
*2
*1
*2
*1
*2
Put the food.
*1 It takes longer time to complete when the operation overlaps with defrosting of the cooling unit because this mode
starts after defrosting is completed.
*2 The temperature setting after cancellation is the same.

EN-13
EN
2
1
Additional settings
To select mode
Applicable
modes
Water dispenser lock
Door alarm off mode
Sound off mode
Control panel lock
Motion sensor off
LED indicator off
Press enter key. Hold enter key and press select
key until the buzzer sounds.
Selected icon ashes.
:The icons change in the order
shown above by pressing
. ( :Reverse)
Water dispenser lock
• Use this mode to prevent the water dispenser from
being used unintentionally by children or others.
Procedure Display
3
or
or
Select icon.
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.
Door alarm off
• Use this mode to switch the door alarm to OFF.
• Use this mode to switch the dispenser door alarm to OFF.
Procedure Display
3
or
or
Select icon.
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.
Sound off
• Use this mode to switch the sound of control panel and
the ending sound of ice tray cleaning to “OFF”.
Procedure Display
3
or
or
Select icon.
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.

EN-14
Additional settings
Control panel lock
• Use this mode to prevent the control panel from being
used unintentionally by children or others.
Procedure Display
3
or
or
Select icon.
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.
How to cancel control panel lock
Procedure Display
1
Touch enter key for 3 seconds or more.
2
or
or
Select OFF.
3
Press enter key to set mode OFF.
Motion sensor off
• Use this mode to switch the motion sensor to OFF.
Procedure Display
3
or
or
Select indication (left).
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.
LED indicator off
• Use this mode to switch the indicator to OFF.
Procedure Display
3
or
or
Select indication (right).
4
Press enter key. Current setting
5
or
or
• ON / OFF switches in the order by pressing select
key.
6
Press enter key to set mode ON.

EN-15
EN
Automatic ice maker
Water tank
Capacity : Approx. 1.8 L
Upper limit temperature
of water : 60°C.
Description
Ice tray
Ice tray is located at
the upper section in the
back.
(Unremovable)
Ice storage box
When you pull the ice
storage box, it leans
slightly and ice cubes
come to the front part of
the box.
Stored ice cube volume
(Maximum)
Normal size ice
: Approx. 232 pcs.
Large size ice
: Approx. 112 pcs.
Shovel
How ice cubes are made
Water supply
• Water is sent from the
water tank to the ice tray.
Ice making
• Ice cubes are made.
(8 pieces at one time)
• The number of ice cubes
per cycle may
sometimes
change.
Releasing
• Ice tray rotates to
release the ice cubes
and returns to “Water
supply”.
• The ice tray doesn’t
rotates when the ice
storage box is full.
<Refrigerator>
Water tank
Pump
Pipe
Detection
lever
Ice tray
Ice storage
box
<Freezer>
Detection lever
The volume of ice cubes are
checked periodically by this lever.
The volume of ice cubes may
decrease if they are not smoothed.
(About half the volume)
Detection
lever
Full volume
Ice making
You can choose 2 sizes as shown below.
Mode Icon Required time for
each ice making
Normal ice Approx. 2 hours
Large ice Approx. 3.5 hours
Note
• The ice making time as shown above is only a rough
indication at the ambient temperature of 30°C,
temperature adjustment set to the initial setting
(refrigerator : 3°C, freezer : -18°C), Energy saving
turned off and with no opening or closing of the doors.
How to operate
• All the ice making modes are OFF(- - -) by a default
setting.
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows OFF.)
3
Press icon again. Current setting
(This indication
shows normal ice.)
• The size of ice cube switches in the order by
pressing the icon.
→ →
4
Press enter key.
The setting is
changed.
Noise-prevention sheet
To turn down the dropping sound of ice cubes.
Do not throw away this sheet.

EN-16
Automatic ice maker
How to use
Before using
• Wash the water tank and the ice storage box.
• Use ice tray cleaning mode to clean the ice tray and the
pipe. (There may be odor or dirt within the automatic ice
maker.)
Procedure
1 Pour water into the water tank, and set the water
tank.
Note
• Step 3:
Do not use other than potable water. (juice, tea,
soda and sports drink etc.) They may dirty the
inside of the ice maker and lead to break down.
• Step 5: Do not tilt the water tank. Otherwise, water
may spill when you carry it.
• Step 5:
Insert the water tank securely. Ice cubes are
not be made unless the tank is inserted fully.
Ice cubes are made automatically.
2 Take out ice cubes.
• 2 types of ice cube are made at the same time.
Cube Multifaceted shape
• Ice cubes piled up at the back of the ice storage box.
Spread them out to the front part to make more ice
cubes.
How to assemble or disassemble water tank
Latch
12
Latch
• The picture above shows how to assemble the tank.
Disassembly is in an opposite way.
Warning
Fill with potable water only.
2
3
4
1
5
Potable water
Limit line of
water
Note
• It takes approximately 24 hours to make the rst set of ice
cubes.
• For hygienic reasons, rell the water once a week even
if water remains in the tank.
• Remove the water tank approximately once a week and
wash it with water.
• When you leave the tank empty, it may sometimes make
a groaning noise but this is normal.
• Do not place the shovel or food on top of the ice cubes.
This may cause the automatic ice maker to malfunction
(damage of the detection lever, etc.) or the case not
being able to be pulled out. Set the shovel at the
designated location.
• Large size ice may not be made when the water level of
the water tank is low even if large ice mode is selected.
White in ice cubes and oating substance
• The minerals contained in water may solidify and whiten
as water freezes. Minerals turn into a state which is
insoluble once it freezes, so melting the ice cubes will
leave only white oating substance, but this is normal.
• This is more likely to happen when you use hard water
(e.g. The hardness of the water is 100 mg/L or more).
Ice making takes longer when:
• The room temperature is high.
• Less cooling operation, e.g. in winter.
• Many food products are stored.
• Refrigerator is defrosting of the cooling unit.
• The door is frequently opened.
• When you restart the ice making operation.
• Energy saving mode is in operation.
Ice making right after changing the mode
• The batch of ice cubes made right after changing the
operating mode does not reect the change in size.
This is because there are still half-made ice cubes left
in the ice tray when switching to the changed mode.
Ice cubes of the 2nd batch or later reects the mode
change.
Protrusions of ice cubes:
There are some slits in the ice tray.
• Therefore, the ice cubes have protrusions that caused
by these slits.
• The protrusions may be pointed. Be careful when putting
the ice cube directly in your mouth.
Shovel
Detection lever
Shovel
Ice tray
Slit
Protrusion

EN-17
EN
Automatic ice maker
Canceling Ice making
• Use this mode during night time or winter time.
• You can use the ice storage box as a freezer case.
How to operate
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows Normal ice
is ON.)
3
Press icon again.
Press icon again. The setting is changed.
• The size of ice cube switches in the order by
pressing the icon.
→ →
4
Press enter key.
5Empty the water tank.
Dry it thoroughly and set into the original position.
Empty
After canceling the ice making
• Even after canceling the ice making mode, the ice tray
and the detection lever operates because the ice maker
conducts the ice releasing once.
• Wait 5 hours after canceling the ice making to put food
in the ice storage box.
To start operation again
• Refer to “Ice making”.
Ice tray cleaning
• This mode is for cleaning the ice tray and the pipe.
• When use this mode : Before making ice for the rst
time or when the refrigerator has not been used for a
long time.
• The water is supplied from the water tank to the ice tray
forcibly.
• The water discharge amount at one cleaning will be
100mL.
However, when large ice mode is set as on, the water
discharge will be 230mL.
Preparation
• Pour water into the water tank and set it.
• Empty the ice storage box.
How to operate
Procedure Display
1
Press enter key.
2
Press icon. Current setting
(This indication shows OFF.)
3
Press icon again. The setting is changed.
• ON/ OFF switches in the order by pressing the
icon.
4
Press enter key. (Ice tray cleaning starts.)
• It takes approximately 40 sec.
Do not pull out the ice storage box during the
operation.
Cleaning in
progress
→
→
Finish
5Follow steps 3 to 4 again.
6Press enter key to complete. Empty the water in the
ice storage box.
Dry it thoroughly and set it into the original position.
Note
• The setting of ice making returns to previous state after
the cleaning is completed once.

EN-18
Water dispenser
Description
Dispenser door
• Touch the sensor to open the dispenser door.
• The dispenser door closes in approximately 1 minute
after the door opens.
• The dispenser door does not close while the motion
sensor detects you.
• The dispenser door alarm sounds before closing.
(You can cancel the alarm by “Door alarm OFF” mode.)
• Touch the sensor or open the refrigerator door or freezer
door (left) to prolong the opening time of the dispenser
door.
If objects or your hand is caught in the dispenser
door while the dispenser door is rotating.
• The dispenser door stops halfway.
(The dispenser door closes automatically after a while.
Touch the sensor to open the dispenser door again.)
If the motion of the dispenser door stops because of
a power failure.
• The dispenser door closes automatically after recovery
from power failure.
Locking the dispenser door
Use this mode to prevent the water dispenser from being
used unintentionally by children or others.
(See “Additional settings”.)
Dispenser door
open
Lever
Tray
Dispenser door
Sensor
How to use
Before using
Remove the dispenser tank and wash it.
(See “Cleaning the dispenser tank” about how to remove it.)
Procedure
1 Pour the water into the dispenser tank.
Note
• Make sure to install the dispenser tank before pouring
water.
• Make sure to close the cap. Otherwise, water may spill
when the door is opened or closed.
• Do not use other than potable water. If other liquid such
as juice is used, it may cause a failure.
• Upper limit temperature of the water is 50°C.
2 Pour water into a glass.

Touch the sensor lightly to
open the dispenser door.

Push the lever with the glass.
(Water is poured.)

Pull the glass.
(Water is stopped.)

The dispenser door
closes automatically.
Note
• Hold your glass beneath the dispenser
for a few seconds after use, to catch
all the dripping. Some dripping may
come down after using the dispenser.
(Dripping may increase especially after
relling water to the empty dispenser
tank.)
• For hygienic reasons, rell the water in
the dispenser tank approximately once
a week. Push the lever and let out all
water in the dispenser tank.
• Throw away the water in the tray
frequently. Otherwise water may
overow.
• If the water dispenser is not used for
an extended period of time, clean and
dry the dispenser tank thoroughly and
attach it to the original position.
• Do not put a glass or objects on the tray.
Warning
Fill with potable water only.
1
3
2
Dispenser tank
Potable water
Cap
Limit line of water
(4.0 L)
1
2
3
1
Lever
Sensor
Dispenser door
Tray
Refrigerator door open
Dispenser tank
Warning
• Do not open the dispenser door forcibly.
• Do not touch the dispenser door when it is
rotating.
The sensor is hidden
from view.