Shehds COB Zoom Par Warm User manual

1
-Maintenance
1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects
better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.
-Statement
The product has well capability and intact packing when leave factory,All of the user should comply
with above warning item and manual ,any misuse cause of the damages are not included in our
guarantee,and also can’t be responsible for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change
-Attention Item
1.For guarantee the life of product,please do not put it on the wet place and not use it the place over
40 degree.
2.Please don’t lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger of get an electric
LED 200W COB Zoom Par Warm White

2
shock.
4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the
life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low.
5.After power off,if it is need used again,please cool down over 20 minuter.
6.Please look round the manual for ensure the product can be used normally.
-Display Control Instruction
Welcome to use our light.The light uses energy-saving LED,long Product life,shockproof,dustproof,
DMX receiver and self-running feature, which can produce a variety of vivid lighting effects,easy to
operate, suitable for all types of entertainment decoration,architectural lighting industry.
Instructions:Press the function key A cycled out the eight different function effects,digital tube first
two digits on behalf of which the current function(see menu).The last two digits represent the
functions in which the address code or speed parameters.Press the B or C key to modify the
parameter values.Press the D key to confirm.

3
-Product Introduction
* Power Supply:AC90--275V,50--60HZ
* Power consumption:200W
* Fixing lamp:LED Cool and Warm White
* DMX-Control-channels:3/7 DMX Channels
* Shuttle:Flash rate:0--10HZ
* Dimmer:0-100% mechanic dimmer
* Long Lifespan LEDs(more than 60,000 hours)
-Display Control Instruction
Display
translate
Function
A001-255
A-DMX
7 Channel control mode
D001-255
D-DMX
3 Channel control mode
AT01-05
Auto
Auto mode
SP00-99
Speed
Auto mode Speed
SD00-99
Sound
Sound Control mode
U000-255
Cool White
Cool White LED adjustment
U000-255
Warm White
Warm White adjustment
F000-255
Focus
Focusing
ST00-20
Strobe
Strobe adjustment
TENP
Temperature
Temperature Control

4
-DMX Channel Summary- 3 Channels Mode ( A001 )
Channel
Function
Value
Function
1.
Speed
0-255
Cool White
2.
Dimming
0-255
Warm White
3.
Strobe
0-255
Focusing
-DMX Channel Summary- 7 Channels Mode ( d001 )
Channel
Function
Value
Function
1.
X axis
0-255
Total dimming
2.
X axis
0-255
Cool White
3.
Y1 axis
0-255
Warm White
4.
Strobe
0-255
Strobe
5.
Focus
0-255
Focusing
6.
Auto
0-255
Auto run mode
7.
Speed
0-255
Function Speed