Shehds LED Beam+Wash 19x15W RGBW Zoom Lighting User manual

1
Maintenance
1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects
better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.
Statement
The product has well capability and intact packing when leave factory,All of the user should comply
with above warning item and manual ,any misuse cause of the damages are not included in our
guarantee,and also can’t be responsible for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change
Attention Item
1.For guarantee the life of product,please do not put it on the wet place and not use it the place over
40 degree.
2.Please don’t lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger of get an electric
LED Beam+Wash 19x15W RGBW Zoom Lighting

2
shock.
4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the
life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low.
5.After power off,if it is need used again,please cool down over 20 minuter.
6.Please look round the manual for ensure the product can be used normally.
1. Maintenance
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Intermittently using will extend this item’s service life.
Please clear the fan ,fan net , and optical lens in order to keep good work state.
Do not use the alcohol or any other organic solvent to wipe the shell.
2. Statement
The product has perfect performance and integrity packing. All users should be strictly
complying with the warning and operating instructions as stated. Or we aren’t in charge of
any result by misusing. Any damage resulting by misuse is not within the Company’s
warranty. Any fault or problem caused by neglecting the manual is also not in the charge
of dealers.
Note: All information is subject to change without prior notice.
3. Safety Precaution
In order to guarantee the product’s life, please don’t put it in the damp places or even
the environment over 60degress.
Always mount this unit in safe and stable matter.
Install or dismantle should operate by professional engineer.
Using lamp，the change rate of power voltage should be within±10%，If the voltage is
too high，it will shorten the light’s life; If it’s not enough, will influence the effect.

3
Please restart it 20 minutes later after turning off light , until full-cooling. Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will improve
the life of bulbs and lamps.
In order to make sure the product is used well, please read the Manual carefully.
Product Introduction
*Power Supply:AC90--275V,50--60HZ
* Power consumption:285W
* Fixing lamp:LED 19×15W RGBW
* DMX-Control-channels:29/15 DMX Channels
* Shuttle:Flash rate:0--10HZ
* Dimmer:0-100% mechanic dimmer
* Long Lifespan LEDs(more than 60,000 hours)
DMX Channel Summary-29 Channels Mode
Channel
Value
Features
CH1
0-255
Pan X axis rotation
CH2
0-255
Tilt Y axis rotation
CH3
0-255
Focusing
CH4
0-255
Pan/Tilt rotation speed adjustment
CH5
0-255
LED1# Total dimming adjustment
CH6
0-255
Red1 Dimmer
CH7
0-255
Green1 Dimmer
CH8
0-255
Blue1 Dimmer
CH9
0-255
White1 Dimmer
CH10
0-255
LED1# Strobe

4
CH11
0-255
LED2# Total light adjustment
CH12
0-255
Red2 Dimmer
CH13
0-255
Green2 Dimmer
CH14
0-255
Blue2 Dimmer
CH15
0-255
White2 Dimmer
CH16
0-255
LED2# Strobe
CH17
0-255
LED3# Total light adjustment
CH18
0-255
Red3 Dimmer
CH19
0-255
Green3 Dimmer
CH20
0-255
Blue3 Dimmer
CH21
0-255
White3 Dimmer
CH22
0-255
LED3# Strobe
CH23
10-127
RGBW Mix Color select
128-160
Color jump mode
161-174
Color Gradient mode
175-200
Color Pulse mode
201-255
Color auto change
CH24
0-255
CH23 speed adjustment
CH25
10-180
Motor auto run mode
181-255
Motor Sound control mode
CH26
0-255
CH25 Program speed adjustment
CH27
0-255
Pan X axis Fine rotation
CH28
0-255
Tilt Y axis Fine rotation

5
CH29
0-255
Rest
DMX Channel Summary-15 Channels Mode
Channel
Value
Features
CH1
0-255
Pan X axis rotation
CH2
0-255
Tilt Y axis rotation
CH3
0-255
Focusing
CH4
0-255
Pan/Tilt rotation speed adjustment
CH5
0-255
LED1 Total dimming adjustment
CH6
0-255
Red Dimmer
CH7
0-255
Green Dimmer
CH8
0-255
Blue Dimmer
CH9
0-255
White Dimmer
CH10
0-255
LED Strobe
CH11
10-127
RGBW Mix Color select
128-160
Color jump mode
161-174
Color Gradient mode
175-200
Color Pulse mode
201-255
Color auto change
CH12
0-255
CH23 speed adjustment
CH13
10-180
Motor auto run mode
181-255
Motor Sound control mode

6
CH14
0-255
CH13 Program speed adjustment
CH15
0-255
Rest