Shelfology Mosey Magnet Board User manual

Mosey
Magnet Board
Install Guide
Shelfology
Certied Rad™
Made In The U.S.A.
By Woodworkers, For
Woodworkers_

Required
Tools Optional Tools
¼" Diameter
Drill Bit
Drill Level
Measuring
Tape Pencil
Stud Finder
Table of Contents Page
Installation Steps 004
Warnings 006
Rad Tips 007
3
GET MORE RADNESS NOW AT SHELFOLOGY.COM_ NEED A HAND? 949.244.1083 // [email protected]_
P.002
Mosey Magnet Board Install Guide Introduction

What’s In
The Box What You’ll Need
With a vast variety of
colors and sizes, Mosey
will help you post
everything from fond
memories to urgent
memos. Made in-house
by us in the United
States of Awesome.
Rad!
Mosey Magnet
Board
1x
Wall Anchor
Set
1x
1⁄2" Nylon
Stando Set
1x
Matching 2"
Wall Fastener
Set
1x
What You’ll
Need
1x
Expo
Dry-Erase
Marker Kit
1x
What You’ll
Need
1x
What You’ll
Need
1x
Magnet Set
1x
Innate Radness
Done!
P.003
CERTIFIED RAD™_
MADE IN THE U.S. OF A.
LIGHTNING FAST LEAD TIMES_
Mosey Magnet Board Install Guide
Introduction

Installation
Steps
001
002
003
Partially install a fastener into an upper
fastener hole location. Mark the location
first with a pencil or fastener tip if
needed. Do not fasten to full tightness.
Yo, let's go! Position your Mosey magnet
board on your wall, ideally with fastener
holes aligned on a stud or blocking.
See Rad Tip ➀ on page 7 for more on
blocking.
Level the board. Mark all remaining
fastener hole locations. Uninstall the rst
fastener, and set the board aside.
GET MORE RADNESS NOW AT SHELFOLOGY.COM_ NEED A HAND? 949.244.1083 // [email protected]_
P.004
Mosey Magnet Board Install Guide Installation Steps

Stay
Rad!
Drill a pilot hole for each fastener location
using a ⁄" drill bit. Pilot holes and wall
anchors are not needed for locations
backed by studs or blocking.
Install drywall anchors in each fastener
hole location crossing drywall that isn't
backed by studs or blocking. If you are
installing on masonry, you must use a
wall anchor rated for masonry use. If
you are using your own anchors, we
recommend Toggler brand.
Position the board. Beginning at the top
of the board, install all wall fasteners
through board and nylon standos.
Stand back and relax, you did it! Give
your cat a celebratory st bump, if
present. Before using any dry erase
markers, see Rad Tip ➁ on page 7.
If you need more help, please reach out
to a shelf geek today.
[e-mail]
949.244.1083
004
006
005
007
P.005
CERTIFIED RAD™_
MADE IN THE U.S. OF A.
LIGHTNING FAST LEAD TIMES_
Mosey Magnet Board Install Guide
Installation Steps

Warnings
1.1 Magnet boards must
be correctly installed
into studs, blocking, or
the appropriate wall
anchors. Failure to do
so may result in sagging
boards, falling objects,
or serious injury.
2.1 This product
contains chemicals
known to the State
of California to cause
cancer and birth defects
or other reproductive
harm. Don't eat these
magnet boards. If
you live outside of
California, do whatever
you want. For more
boring information, visit
www.p65warnings.
ca.gov.
3.1 Any Shelfology
Certied Rad™ product
should be aunted with
caution around friends,
loved ones, and even
complete strangers,
as minimal or extreme
jealousy may occur.
Shelf responsibly.
➁
California
Proposition 65
Warning
➂
This Product
May Make
Others
Incredibly
Jealous
➀
Correct Install
Required For
Safe Use
Whoa, you made it! We
are vicariously stoking
for you right now. Post
your sweet shele on
Instagram now!
@shelfology
#radshele
Need a hand? Speak with a
Shelf Geek at 949.244.1083 or
[e-mail] today.
How did we do? You’ll get
an email soon asking for a
product review, and we’d be
stoked if you oblige. You rock in
advance!
GET MORE RADNESS NOW AT SHELFOLOGY.COM_ NEED A HAND? 949.244.1083 // [email protected]_
P.006
Mosey Magnet Board Install Guide Warnings

1.1 Studs are the vertical
2x4 boards that make
up the bones of your
walls. They provide
solid structure for your
magnet boards to
attach to.
1.2 Blocking is typically
added later between
studs in the wall for
additional support to
mount products to, and
is usually made from
2x4 or 2x6 lumber.
2.1 To avoid staining
your Mosey Magnetic
board, use only Expo
brand dry erase markers
and common dry erase
solutions to clean.
➀
Fasten Into
All Studs &
Blocking The
Magnet Board
Crosses
➁
Use Expo
Brand Dry
Erase Markers
To Save Your
Mosey
P.007
CERTIFIED RAD™_
MADE IN THE U.S. OF A.
LIGHTNING FAST LEAD TIMES_
Mosey Magnet Board Install Guide
Rad Tips

Need a hand? Speak with a
Shelf Geek at 949.244.1083 or
[e-mail] today.
How did we do? You’ll get
an email soon asking for a
product review, and we’d be
stoked if you oblige. You rock
in advance!
© Shelfology 2023
Printed In The USA
TM