Shell SPS-500-01 User manual

SPS-500-01
Portable Power
Station
© 2021 Shell Brands International AG. All rights reserved.
583Wh Portable Lithium Battery
Emergency Power Source

2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
EXPLANATION OF SYMBOLS� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
SIGNAL WORDS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
INTENDED USE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
BEFORE FIRST USE� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
TIPS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
PARTS AND FEATURES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
INSTALLATION INSTRUCTIONS� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
OPERATING INSTRUCTIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
COMPLIANCE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
USER MAINTENANCE INSTRUCTIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
MOVING AND STORAGE INSTRUCTIONS� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
SPECIFICATIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
TROUBLESHOOTING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
WARRANTY CONDITIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
FCC STATEMENT � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18

3
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK
OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS
WARNING – When using this product, basic precautions should always be followed,
including the following:
a) Read all the instructions before using the product�
b) To reduce the risk of injury, close supervision is necessary when the product is used near
children�
c) Do not put fingers or hands into the product�
d) Use of an attachment not recommended or sold by the power pack manufacturer may
result in a risk of fire, electric shock or injury to persons�
e) To reduce the risk of damage to the electrical plug and cord, pull the plug rather than
the cord when disconnecting the power pack�
f) Do not use a battery pack or product that is damaged or modified� Damaged or
modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk
of injury�
g) Do not operate the power pack with a damaged cord or plug, or a damaged output
cable�
h) Do not disassemble the power pack; take it to a qualified service person when service
or repair is required� Incorrect reassembly may result in a risk of fire or electric shock�
i) To reduce the risk of electric shock, unplug the power pack from the outlet before
attempting any instructed servicing�
j) When charging the internal battery, work in a well ventilated area and do not restrict
ventilation in any way�
k) Do not expose a power pack to fire or excessive temperature� Exposure to fire or
temperature above 265 °F (130 °C) may cause explosion�
l) Have servicing performed by a qualified repair person using only identical replacement
parts� This will ensure that the safety of the product is maintained�
• This product is not waterproof� Use indoor if it is raining or the ground is wet outside��
• The product is not to be stored or kept in a vehicle�
• Do not plug in a device that exceeds the rated power or current value of the AC or DC
output ports� Doing so may result in electrical shock, chemical burn, fire, or explosion
and will void the warranty�

4
• Do not disassemble the product, there are no user-serviceable parts inside� Incorrect
reassembly may result in electrical shock, chemical burn, fire, or explosion causing
personal injury or damage to other devices� Disassembly of the product will void the
warranty�
• Improper use of this product may result in electrical shock, chemical burn, fire, or
explosion causing personal injury or damage to other devices�
• The product may become warm during operation� During operation, keep the product
away from materials that may be affected by warm temperatures�
• Do not leave a product on prolonged charge when not in use�
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE!
EXPLANATION OF SYMBOLS
Alternating current (AC)
Direct current (DC)
SIGNAL WORDS
DANGER Indicates a hazardous situation that, if not avoided, will result in
death or serious injury�
WARNING Indicates a hazardous situation that, if not avoided, could result in
death or serious injury�
CAUTION Indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury�
NOTICE Indicates information considered important, but not hazard related�

5
INTENDED USE
• This product is intended for charging external devices� This product supports DC and AC
outputs and provides USB-A & QC, USB-C PD and wireless charging functionality�
• This product features an emergency light function to alert other motorists of non-moving
objects on the road�
• This product is intended for private use only� It is not intended for commercial use�
• This product is not waterproof� Use indoor if it is raining or the ground is wet outside�
• This product is not suitable for use with personal safety equipment, equipment for
nuclear facilities, the manufacture of air and spacecraft, etc�
BEFORE FIRST USE
DANGER
• Keep any packaging materials away from children and pets – these materials are a
potential source of danger, e�g� suffocation�
• Remove all the packing materials�
• Remove and review all components before use�
TIPS
CAUTION
• The product is not permitted for use on aircrafts�
• To preserve the battery lifespan, recharge the battery at least every 6 months�
• Use original or certified charger and cables�
• Avoid extreme temperature�
• Do not drop�
• Do not disassemble�
• Do not expose to liquids�
• Install the plug covers after each operation�
• Fully charge the battery before first use and prolonged storage�
• Charge, operate and store the product in the allowed temperature range only
(32–104 °F [0–40 °C])�
• Switch off external devices before connecting them to the product�
• When transporting the product (e�g� in a car) fix the product securely to prevent hitting
other objects or a fall�

6
PARTS AND FEATURES
OUT
Mins Hours
IN
Watts
OVERLOAD HOT COLD AC USB-A TYPE-C CAR PORT 12V WIRELESS LED
188
2 3 4
1
58 9 106 7
Item Part Name Item Part Name
1Display 6Over temperature warning
2Power of input/output 7Low temperature warning
3Battery level 8Output mode
4Battery life time 9LED indicator
5Overload warning 10 Error indicator

7
12
13
14
15
16
17 18 19 20 21 22 23
27
11
1
26
25
24
Item Part Name Item Part Name
11
Power button
20
USB-C PD socket (input&output)
12 DC output on/off button 21 AC power socket x2
13
Car charger socket 22 AC output on/off button
14
Input indicator 23 USB output on/off button
15
Anderson sockets (Solar panel)
24
Fan
16 DC socket (input only) 25
LED light on/off button
17 DC socket x2 (output only) 26 Wireless charging panel
18
USB-A QC socket
27
Handle
19
USB-A socket x2

8
28
29
30
Item Part Name
28
LED light module
29
12V car charger
30
Power adaptor

9
INSTALLATION INSTRUCTIONS
Charging the product
NOTICE
• Fully charge the product before first use�
• During charging, the input indicator
14
lights up and the bars of the battery level
3
are flashing�
• When the input indicator
14
goes off and the battery level
3
shows 100 %, the
product is fully charged� Disconnect the charger from the product�
• There are 4 ways of charging the product:
Charging method How to charge Full charge duration
Power adaptor
30
• Connect the power adaptor
30
to the DC socket
16
�around 9 hours
12 V car charger
29
• Connect the car charger plug
to the DC socket
16
� around 9 hours
65 W solar panel
MPPT (not provided)
• Connect the solar panel
plug
to the Anderson sockets
15
or
to the DC socket
16
�
(connect to one at a time)
around 9 hours
(depending on the
weather conditions)
USB-C power delivery
65 W (not provided) • Connect the charger to the
USB-C PD socket
20
�around 9 hours
not support less than
PD 65W charger
Want to be faster? Here is a way to speed up the charging time:
Connect both 65W power adapter and USB-C power delivery 65W charger at the
same time, you can have the most optimum charging rate at 130W maximum, the
duration time will be around 4�5 hours to fully charge�

10
OPERATING INSTRUCTIONS
Before operating the product, refer to the Important safety instructions chapter on
P� 3 in order to avoid the risk of fire, electric shock or injury to persons�
Switching on/off
NOTICE
• After 2 minutes of inactivity without any power input/output, the display
1
goes off�
• After 2 hours of inactivity without any power input/output, the product switches off�
• To switch on, press and hold the power button
11
for 3 seconds� The power
button
11
and the display
1
light up�
• To switch off, press and hold the power button
11
for 3 seconds� The power
button
11
and the display
1
go off�

11
Charging external devices
CAUTION
• Before connecting, ensure the connected device(s) do not exceed the product’s output
(see the Specifications chapter, P� 14)�
• Switch off external devices before connecting them to the product�
When the product is on, press the corresponding button to charge:
How to charge Start/stop charging On indicator
• Connect the external device to the
car charger socket
13
�
• Connect the external device to the
DC socket
17
�
Press the DC output on/
off button
12
�
DC output on/off
button
12
lights
up�
• Place the wireless charging
compatible external device on the
wireless charging panel
26
�
• Connect the external device to the
USB-A socket(s)
19
�
• Connect the external device to the
USB-A QC socket
18
�
• Connect the external device to the
USB-C PD socket
20
�
Press the USB output
on/off button
23
�
USB output on/off
button
23
lights
up�
• Connect the external device(s) to
the AC power socket(s)
21
�
Press and hold the AC
output on/off button
22
for 2 seconds�
AC output on/off
button
22
lights
up�
Status Battery level Condition
1 100% — 6% Can be used normally�
2 Below 5% Battery level
3
flashes on the
display� Can be used normally�
30% PleaseError code 04 show up�
recharge immediately�

12
Operating the LED light module (not only for emergency use)
NOTICE
• The LED light module
28
can be used to support the emergency triangle of your vehicle
to alert other motorists of non-moving object on the road�
• Place the emergency triangle of your vehicle 100 feet (30 m) behind the vehicle, and
this product, with the emergency light on, 10 feet (3 m) behind the vehicle�
To toggle between the LED light modes, press the LED light on/off button
25
repeatedly�
LED indicator
9
is on when any LED light mode is active�
Press LED light on/off button
25
Light mode
1Steady emergency triangle light
2Flashing emergency triangle light
3Night torch mode high
4Night torch mode low
5SOS/repellent mode (with beep sound)
6Off
NOTICE
• Hold the LED light on/off button
25
for 3 seconds to enter the SOS/repellent mode
directly� LED indicator
9
is on when any light mode is active�
COMPLIANCE
Output Devices Wattage Usage life
AC power 32" TV 60 W approx� 7�5 hours
Car charger 12 V Electric kettle 120 W max� approx� 2 hours
DC Mini fridge 60 W approx� 37 hours
DC Drone 90 W approx� 9 recharges
USB-C PD Mobile phone 20 W approx� 53 recharges
USB-C PD 12" Mac Book 30 W approx� 7 recharges
USB-C PD Motion camera 5 W max� approx� 95 recharges

13
USER MAINTENANCE INSTRUCTIONS
CAUTION
• Install the plug covers before cleaning and/or storing the product�
• Always carry the product by the handle
27
�
• Disconnect all external devices and switch off the product before cleaning�
• During cleaning, do not immerse the product in water or other liquids� Never hold the
product under running water�
• To clean the product, wipe with a soft, slightly moist cloth�
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils
to clean the product�
MOVING AND STORAGE INSTRUCTIONS
NOTICE
• The product’s battery is not replaceable�
• Fully charge the battery before storage� In case of a prolonged storage, fully charge the
product every 6 months�
• Store the product in its original packaging in a dry area� Keep away from children and
pets�
• Store the product in dry, warm conditions, away from direct sunlight�

14
SPECIFICATIONS
General
Model: SPS-500-01
Discharging temperature: -4°F to 140°F (±5°F), -20°C to 60°C (±3°C)
Charging temperature: 32°F to 122°F (±5°F), 0°C to 50°C (±3°C)
Net weight*: 15.0 lb (6.7 kg)
Dimensions*: 11.81 x 7.08 x 8.66" (30 x 18 x 22 cm)
*The weight and dimensions may vary due to measurement errors. Please refer to the actual
measurements.
Power Output
AC output: 500 W Continuous
120 V 60 Hz, Pure Sine Wave
DC output x2: 12 V , 5 A(each)
Car socket output: 12 V , 10 A
USB output:
2 x USB-A 5 V, 2.4 A Max. 12 W x 2
1 x USB (QC)
5 V, 3 A;
9 V, 2 A;
12 V, 1.5 A
Max. 18 W
1 x Type C (PD)
5 V, 3 A
9 V, 3 A
15 V, 3 A
20 V, 3.25A
Max. 65 W
Wireless output: 5 V 3 A, Max. 15W
Power Input
Power input: Max. 65 W, 24 V
Solar panel input: Max. 65 W panel power, max. 5 A current
USB input: Mi n. 60 W Type C (PD)
Battery
Battery type: Lithium-Ion 583 Wh
Shelf life: 1 year (after full charge)
Cycle life: 500 cycles (80 %)

15
TROUBLESHOOTING
Error code Problem Solution
01
Over load Remove extra devices from DC or
AC outputs
02
PV (Solar panel) charging
input over-powered
Replace another solar panel with
less output power�
03
or
03
Temperature too high
Keep the product at suitable
ambient temperature�
Temperature too low
04
Output low voltage Recharge the station before use
05
Short circuit Remove the appliance and check if
there are any short circuits�
06
System error Email support@skyintelligent�com
for customer support�
07
DC input error Plug the DC charging cable to the
correct input socket - see page 7
16

16
Error code Problem Solution
The product does not switch on
Charge the battery�
(see Charging the product
chapter, P� 9)
The product does not charge
or operate
Ensure to press the corresponding
charging type button�
(see Charging external
devices chapter, P� 11)
Ensure the device and charging
cables are functioning� Change to
another cable if problem persists�
Fan
24
blockage Switch off the product� Vacuum the
fan’s
24
vents�

17
WARRANTY CONDITIONS
a) We will, at our discretion, repair any product that proves to be defective in material or
workmanship during the warranty period of 12 months�
b) A valid proof of purchase must be presented upon request for warranty service;
c) The warranty shall not apply if:
• the product was modified or repaired in any way by persons other than our
technicians
• the product has been damaged through misuse, negligence or inflow of any liquid
• the product was not used according to user manual
• losses or damages are caused by force majeure or natural disasters
d) The warranty terms and conditions are subject to change without prior notice�
e) Product specifications are subject to change without prior notice�
f) Shell shall not be liable for technical or editorial errors or omissions contained herein�
g) Visit www�skyintelligent�com/support for support and the latest product information�

18
FCC STATEMENT
FCC SUPPLIER’S DECLARATION OF CONFORMITY
Unique Identifier SPS-500-01
Responsible Party TianHeng Consulting, LLC
U�S� Contact
Information
392 Andover Street,
Wilmington, MA 01887, USA
Email support@skyintelligent�com
FCC COMPLIANCE STATEMENT
1� This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation�
2� Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment�
FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules� These limits are designed to provide
reasonable protection against harmful interference in a residential installation� This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications�
However, there is no guarantee that interference will not occur in a particular installation�
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna�
• Increase the separation between the equipment and receiver�
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected�
• Consult the dealer or an experienced radio / TV technician for help�

ISED COMPLIANCE STATEMENT
19
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s)� Operation is subject
to the following two conditions:
(1) This device may not cause interference�
(2) This device must accept any interference, including interference that may cause
undesired operation of the device�
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence� L’exploitation est autorisée aux deux conditions
suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement�
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment� This equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body�
Cet équipement est conforme aux limites d'exposition aux radiations FCC/IC CNR-102
établies pour un environnement non contrôlé� Cet équipement doit être installé et utilisé avec
une distance minimale de 20 cm entre le radiateur et votre corps�
Imported by:
TianHeng Consulting Inc�
130 Terence Matthews Cres, Suite C2
Kanata, ON K2M 0J1
Canada

SPS-500-01
Portable Power Station
Power Station is part of the Shell Energy range of products.
Shell and the Shell Pecten logo are trade marks of Shell. Used under license.
583Wh Portable Lithium Battery
Emergency Power Source
V4�0