ShelterLogic 22966 User manual

05_22966_22976_0A
Page 1
10' x 10' Slant Leg Pop-Up Canopy
Assembly Instructions
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
1-800-524-9970
1-800-559-6175
Canada:
DESCRIPTION MODEL #
10'x10'Slant Leg Pop-Up - Red 22966
10'x10'Slant Leg Pop-Up - Checkered 22976
RECOMMENDED TOOLS
Before you start: 2+ individual recommended for assembly, approximate time 15 min.
5/7/12

05_22966_22976_0A
Page 2
WARNING
• Do NOT smoke or use open ame devices in or around this temporary
portable shade product.
• Do NOT store ammable liquids (gasoline, kerosene, propane,
barbeque grills, re pits, deep fryers or smokers inside this product).
• Choose the set-up location of your portable shade product carefullly.
Check for overhead utility lines, trees, branches or other structures.
CAUTION
1. Please read instructions COMPLETELY before assembly. If you have
questions, please call the consumer support number.
2. This product is classied as a temporary portable shade product and
is intended to provide basic shade and protection from
environmental elements, including the effects of sun, rain, tree sap,
bird and animal excrement.
3. Proper anchoring is the RESPONSIBILITY OF THE OWNER. Any
temporary portable shade product that is not anchored securely and
properly has the potential to blow away in high winds. ShelterLogic
cannot be held responsible for damage caused by any product that
blows away.
4. THIS IS A SHADE PRODUCT AND NOT RECOMMENDED AS A
PERMANENT STRUCTURE. IT IS NOT DESIGNED TO BE USED
IN HIGH WINDS, SNOW OR ICE STORMS.
WARNINGS & CAUTIONS

05_22966_22976_0A
Page 3
Step 1:
Remove assembly
from portable, wheeled
storage bag. Grab corner
legs in each hand. Lift
frame slightly off ground.
Stepping backwards, pull
frame apart until your
arms are fully extended.
Step 2:
Unfold cover. Place
cover over frame.
Align corner pockets
of cover over frame
legs.
Step 3: Do not place hands
between frame tubes.
Push up until canopy is
fully opened.
Step 5: Pull corners down snug,
attaching hook and loop
fasteners. Secure cover
fasteners around top
roof frame.
Step 4: Slide corner brackets
up until button snaps
into place.
Step 6:
Step 7:
For temporary anchoring of canopy on grass, dirt or packed
soil, insert temporary spike anchors through corner feet.
CAUTION: Temporary spike anchors are NOT designed
for permanent installation. Never leave canopy unattended.
For assembly questions, Please call Customer Support:
1-800-524-9970 or in CANADA: 1-800-559-6175
SHOWN
WITHOUT
COVER
FOR
CLARITY
CORNER OF
SHELTER
COVER
FASTENER
ANCHOR
Slide legs to desired
height, making sure
buttons snap into place.

05_22966_22976_0A
Page 4
Part Part Number Description
1 15349 Leg Tube Assembly
2 15273 Gemel Assembly
3 15276 Slide Tube Assembly
4 22603 TOP CREST KIT
5 22604 SLIDING CONNECTOR KIT
6 15550 Replacement Cover - Checkered Flag
6 800813 Replacement Cover - Red
not shown 15554 Replacement Roller Bag
To Order Replacement Parts, Please Order by Part Number:
see 4
see 5
4 5
A
6