ShelterLogic 23531 User manual

05-23531-0B
10' x 20'
All-Purpose Canopy
Installation
Instructions
Please read instructions
COMPLETELY before assembly.
DO NOT RETURN
PRODUCT TO
THE STORE
Missing Parts,
Help with Assembly
Need Replacements,or
Please Contact
Customer Service:
1-800-524-9970
8 13104
13105
13107
3-Way Frame Connectors
4-Way
F r ame
Connectors
White Valance Cover
40.7" Swedged Tube
White Bungee Cords 10066
39" Straight Tube with extra hole
for top of leg
39.5" Straight Cross Tube
6
6
1
13101
13102
1007
Enclosure Kit 110286
2
24
Black Bungee Cords 00748
48
Description Qty. tPar #
8
9
Base Feet 8
10075
25 13103
Model #23531
24.4" Rafter Tube
Pg.1 08/24/06
Anchors 10431
8
10432
2
Ropes 40'
ShelterLogic ,LLC
www.shelterlogic.com
ShelterLogic
TM

1. FRAME ASSEMBLY
2. CONNECT PIPES
4. ATTACHINGLEGS Insert both middle legs on
one side of the frame,swedged
end up, then the end legs on that
same side. Repeat for the other side. Now you can secure the legs
to the side bend connectors and secure the cover with bungee cords.
3. PLACE COVER
Place cover over frame so that the
grommetted portion is face down,
this allows the valance to wrap
around and cover the frame eaves.
5. SECURING COVER
Page 2
13103
13107
13103
13104
13101
13102
13101
NOTE:
SWEDGED TUBES FIT
INTO END OF PLAIN
TUBE WHERE CRIMP
MARKS ARE.
NOTE:
SWEDGED TUBES FIT
INTO END OF PLAIN
TUBE WHERE CRIMP
MARKS ARE.
Working from the inside of the cover, you can
hide the bungee balls from the outside, giving
the canopy a cleaner look.
Combine all the parts listed below to form
the frame, starting with the center peak,
and then assemble each side.
17 - #13103 (40.7" Swedged Tubes)
8 - #13104 (24.4" Rafter Tubes)
9 - #13107 (39.5" Straight Cross)
6 - #13101 (3-Way Frame Connector)
6 - #13102 (4-Way Frame Connector)
#13105 to leg
Straight tube
#13103
Top leg
of tube
Swedged tube
Connect one each of part
# 13105 and # 13103 then
set them aside for now.
#13105
#13103

Page 3
COVER
TwistTite
Cover S-Hooks are
designed to hold the
front & back of the cover
tightly in place.
1. Hook one onto each
of the INSIDE of the
cover legs.
2. Adjust the drawstring
evenly on each side of
the canopy by pulling
the drawstrings on each
end of the cover at the
same time
3. Secure rope to "S" Hook
4. The next step will
feature our new "TwistTite"
procedure to fit the cover
snugly.
To get your cover to fit
snugly over the frame, "twist"
each corner leg pole equally
until the cover becomes very
tight. (diagram A). Make sure to
line up the hole in the top of the
leg with the hole in the corner
side bends.
Twist
tube
A
Twist
tube
Twist tube this direction
to tighten cover
6. TwistTite
7. ATTACHING ENCLOSURE KIT
8. BASE FEET AND ANCHOR
2) Tie rope to loop on 3-way frame connectors.
3) Come down leg pole to the point where the cover stops, loop the rope around the leg. By doing this, you will prevent the
anchor rope from pulling up the valance of the cover, when you install the anchors (#10431).
Rope
1) Insert the Base Feet Plates ontothe bottom of the legs.
10286
TM

CARE AND CLEANING
INFORMATION
DO NOT expose the canopy to open fire or flame by using BBQ
grills or smoking under the canopy. DO NOT use harsh
abrasives, bleach or cleansers.
Cover can be easily cleaned with mild soap and water.
ShelterLogic DOES NOT guarantee and will
not be held be responsible for any canopy exposed to and / or
damaged by conditions of snow, ice, heavy rain, or high wind
under ANY circumstance. We also will not be responsible for any
other damage caused by the canopy or to the canopy. Therefore,
ANCHORING OF CANOPY
EFFECTS OF STRONG
WINDS, SNOW OR ICE
Our canopies are designed to offer protection from damage
caused by the sun, light rain, tree sap, and birds.
properly or securely will fly away and we will not be held
other outside structure.
THIS IS A TEMPORARY STRUCTURE AND IS NOT
RECOMMENDED AS A PERMANENT STRUCTURE.
or severe weather front is approaching. We suggest you contact
your insurance carrier for information just as you would for any
After assembly your structure must be anchored to prevent
Periodically check the stakes or anchors to ensure stability of
screw-in anchors and cable attached to each leg. Mobile home
anchors will also work. Any canopy that is not anchored
PROPER AND IMPROPER
the unit, especially following exposure to the elements such as
high winds or heavy rain. The preferred anchoring system uses
kits, walls, tubes, as well as additional covers, and other
accessories. Any item purchased is shipped factory direct,
thus ensuring consistent quality of our products.
For more information, please contact our customer service
department Mon-Sat. 8:30 AM - 8:00 PM EST.
damage. PROPER ANCHORING IS YOUR RESPONSIBILITY .
Missing Parts,
Help with Assembly
Need Replacements,or
Please Contact
Customer Service:
1-800-524-9970
Replacement parts are available. We offer several anchoring
IMPORTANT!!
OUR GUARANTEE
PLEASE READ
CAREFULLY
responsible for a canopy that has blown away.
you will need to remove the cover when you know that a strong
e
EFF
Pg.4
ShelterLogic ,LLC
www.shelterlogic.com