Shenzhen Codejet 128K User manual

Codejet 128K High Resolution Inkjet Printer
Instruction Manual

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 1 -
Distinguished Customer,
Thanks for your selection of Codejet 128K Inkjet Printer. We are sure this printer can print
high-quality & high-efficient inkjet printing effect with its outstanding performance.
To reach the best printing effect, please read this instruction manual carefully before using
this printer. Especially pls draw your attention to the Attention Items mentioned at Part 1.
Shenzhen Aomaisen Technology Co.,Ltd.
TEL:[phone]
FAX:[phone]
Codejet reserves its right to update the parameters and enhance product performance
without prior notice.

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 2 -
CONTENTS
THANKS FOR SELECTION OF Codejet 128K
P1
CONTENTS INDEX
P2
PART 1 ATTENTIONS & TECHNICAL PARAMETERS
P3-P5
PART 2 INSTALLATION
2.1 Environment & Location
2.2 Ink cartridge installation
2.3 Sensor installation
2.4 Relative position of printinghead & ink cartridge
2.5 Checking after Assembly
2.6 Packing requirements for shipment
P6-P8
P6
P6
P6-P7
P7
P8
P8
PART 3 Keyboard Introducing
P9-P10
PART 4 Operation System
4.1 Main Menu introducing
4.2 Editing printing Message
4.3 Printing Parameters Settings
4.4 Clock Settings
4.5 Variable Settings
4.6 Start Printing
4.7 Advance Settings
4.8 About the machine
P11-P23
P11
P12-P16
P16-P18
P18-P19
P20
P20-P22
P22-P23
P23
PART 5 SOFTWARE OPERATION
5.1 Installation of software
5.2 Downloading character fonts & pictures
P24-P33
P24-P28
P28-P33
PART 6 PRINTINGHEAD CLEANING & PRINTING POSITION
P34-P35
PART 7 INK SELECTION
P35-P36
PART 8 MAINTENANCES
P36-P37
PART 9 FAQ
P38-P40
ACCESSORIES
P41

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 3 -
PART 1 ATTENTIONS & TECHNICAL PARAMETERS
Thanks for selecting Codejet Inkjet High-Resolution Printer 128K. It is a high resolution ink jet
printer used for printing text, symbols etc. The printing band is 1mm -18mm. The printing
speed is up to 35 Meters per minute. Please read following instructions for detailed operations
and maintenances.
IMPORTANT NOTES
★TO ASSURE THE BEST PRINTING EFFECT AND THE MACHINE KEEP THE BEST
PERFORMANCES, PLS MAKE SURE USING THE DESIGNATED INK AND CLEANING
SOLVENT BY CODEJET.
POOR PRINTING QUALITY OR MACHINE DAMAGED RESULTED FROM
NON-DESIGNATED INK OR CLEANING SOLVENT WILL BE OUT OF WARRANTY.
★NEVER TOUCH OR CLEAN THE NOZZLES WITH ANY MATERIALS, ONLY COULD
USE DESIGNATED CLEANING SOLVENT TO CLEAR THE NOZZLES, OR THE
PRINTINGHEAD WILL BE DAMAGED. AND PLS BE SURE SQUEEZE THE INK
CARTRIDGE TILL THE INK FLOWING OUT FROM NOZZLES SMOOTHLY AFTER YOU
SPRAYING CLEANING SOLVENT TO THE NOZZLES, OR THE PRINTINGHEAD WILL
BE DAMAGED FOREVER.
★NEVER LEAVE THE MACHINE WITHOUT THE INK CARTRIDGE INSERTED. OR THE
INK SYSTEM MAY WILL BE POLLUTED. NEVER PUT YOUR FINGERS INTO THE INK
SLOT, OR YOUR FINGERS WILL BE INJUR BY THE SHARP NEEDLE AT THE SLOT.
★PLS BE SURE SPRAY THE CLEANING SOLVENT TO THE NOZZLES FOR 3 TO 5
TIMES BEFORE SQUEEZING THE INK CARTRIDGE.
★WHEN YOU NEED STOPING TO USE MACHINE, PLS TURN POWER DOWN. THEN
PUT THE PROTECTING CAP ON DIRECTLY. PLS DO NOT SPRAY THE CLEANING
SOLVENT TO THE NOZZLES FOREVER, OR THE NOZZLES WILL BE BLOCKED.
★PLS DO NOT USE MIXED INK WITH DIFFERENT INKS MIXED, EVEN IF THESE INKS
SUPPLIED BY CODEJET, OR IT WILL DAMAGE THE INK SYSTEM BADLY AND WILL
BE OUT OF WARRANTY.
★INKS AND CLEANING SOLVENT ARE BELONG TO INFLAMMABLE SUBSTANCE, PLS
BE SURE THE MACHINE KEEP AWAY FROM FIRE SOURCES.
★PLS BE SURE CUT POWER DOWN WHEN YOU TAKE THE MACHINE APART TO
AVOID GETTING AN ELECTRIC SHOCK.

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 4 -
★PLS DO NOT LOOK AT THE NOZZLES WHEN THE MACHINE IS WORKING TO AVOID
THE INK SPLASH INTO YOUR EYES, IF INK SPLASHED INTO YOU EYES BY
ACCIDENT, PLS WASH IT BY WATER IMMEDIATELY AND THEN SEE A DOCTOR.
★PLS DO NOT INSERT OR PULL OUT THE PLUG WHEN THE MACHINE IS WORKING,
OR THE MAINBOARD WILL BE BURNED OUT
★WE WILL PROVIDE FURTHER DETAILED EXPLANATION IN RELATIVE CHAPTERS.

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 5 -
Technical Parameters
Print Resolution：200 DPI
Print Fonts：High Resolution Character Fonts and DOT-MATRIX Character Fonts
Languages ：English and National Chinese library Grade 1 & Grade 2, PingYing Input
Method.
Printing symbols：Can print logos & pictures, the length unlimited.
Printing lines: up to 15 lines
Printing character height：from 1mm to18mm
（1、2、3、4、5、6、7、8、10、12、15、18mm）
Printing Distance：Distance between printinghead and printed object is 5-10mm
Automatic Printing：Date, Time, Lot No, Shift No, Serial No. ect
Message Memory：Save up to 100 messages and 100 pictures
Text Length：Max. 200 characters per message
Serial No：1-9 variable sequential numbers
Printing Speed：Maximum 35 meters /minute. Speed isn’t influenced by the printing
lines.
Ink colors：Black, Red, White, Blue
Printing direction ：Printinghead can be rotated 180°, programmely the printed
message can be rotated vertically and horizontally.
Printing material: porous and non-porous materials.
Applicable products：Beverage, Food, Pharmaceuticals, Cosmetics, Plastic Pipes,
Steel, Aluminum Alloy, Batteries, Electrics, Chemicals, Tobacco, Timer etc.
Ink Cartridge：Solvent-based or oil-based environmentally friendly ink cartridge. No
need to use air source or Pump.
Interface：USB, Encoder、sensor、Power Cord
Machine Size：34.7x22x 10Cm
Machine Supporter: can be adjusted from 50-75cm.
Rated Power ：AC 110V-220V
Power：Average lower than 100W
Operation Temperature：15℃ – 32℃ ；40% - 70% Humidity
Status Display: Printing, Encoder, Sensor

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 6 -
PART 2 Assembling
2.1 Environment &Location
a. The electricity supply must be stable, free from momentary high voltage and
interference.
b. The Machine must be grounded.
c. To reach the best printing quality, please assemble your printer on the production
line and pls be sure the flowing production line is stable.
d. Any warped edges that pass through the printinghead might lower the printing
quality.
e. Please keep a certain distance between the printed products, so that the sensor
can detect the printed products smoothly.
f. The metal supporter for machine must be places horizontally without any vibration.
g. 128K Inkjet printer must be assembled horizontally without any lean front or lean
back, or ink will leak or can not print out.
h. The rated voltage for 128K Inkjet Printer is 110V-220V/50-60H
2.2 Ink cartridge assembling
a. The ink supply is ink cartridge. It’s easy and simple to replace ink cartridge.
b. To replace the ink cartridge, please press down the clip and take out the old
cartridge. And insert new one, If it is hard to insert, please check and make sure
the side with hole is downward.
c. If you replace the ink cartridge when the machine is working, pls quick (several
seconds are ok), or the air easy to be absorbed into ink system. If the air absorbed
in by accident, pls squeeze the ink cartridge to make sure the air pulled out.
2.3 Sensor assembling

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 7 -
The sensor must be assembled in front of the printinghead, either left or right. The
exact position depends on the flowing direction of product. When the sensor detects
the product, it starts counting the time and will start printing when reaching the delay
time. Pls be sure a certain distance between products, or the sensor can not detect
the printed products smoothly. Please refer to following pictures.
2.4 The relative position of printinghead and ink cartridge
a. If the printinghead is higher than the recommended location, the inkjet printer will
not start printing.
b. If the printinghead is lower than the recommended location, the ink will leak from
the printinghead.
c. When assembling printinghead, the distance between the bottom of printinghead
and bottom of machine should be 30mm~50mm. If it’s higher than 50mm, the spray
head will not begin printing. If it’s lower than 30mm,the ink will leak. Please refer to
following picture.
Direction of Proucts
Direction of Proucts
30-50mm
30-50 mm
Bottom of Spray Head
Bottom of Spray Head
Base of Machine
Base of Machine
Sensor on Left
Hoding
Bracket for

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 8 -
2.5 Checking after assembling finished
a. Check whether the ink cartridge is already inserted.
b. Check whether turn power on.
c. Check whether the printinghead is cleaned and squeeze the ink cartridge
d. Enter a message as described in the Message Editting Section.
e. Click the to activate the printing function.
2.6 Packing requirements of shipment.
Pls be sure packing the machine according to following steps, when you need to ship
machine,
a. When the ink cartridge stay in the machine, please always keep the position of
printinghead is higher than the position of the ink cartridge, or the ink will be flowed
out from printinghead.
b. Pls be sure the protecting film don’t touch the nozzles, when you put the protecting
film on the printinghead, so that assuring the printinghead will not be polluted or
damaged
c. Please ensure the printinghead isn’t damaged by any possible accident during
transportation, because it’s very delicate and easily damaged.
d. If you remove the ink cartridge, please refer to instruction of Part 8 Maintenance
to clean the inking system.

Codejet 128K Inkjet Printer Instruction Manual—English Version
- 9 -
PART 3 Introduction to Keyboard