Sherman 40 cutter User manual

V1.2 16.06.09

USER MANUAL

Inverter PLASMA CUTTING

40 CUTTER

Sherman

EDGE WITH EQUIPMENT! EDGE WITH EQUIPMENT! EDGE WITH EQUIPMENT!

before installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions andbefore installation and and start-up device and equipment should with y acquainted Æ si ę with this and instructions and

1. GENERAL

Commissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this andCommissioning and operation of the device and devices can with on the make Æ Only after a careful study ę with this and

instructions and Service. instructions and Service. instructions and Service.

Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the Because of ę du on you and Continuously development of technical devices and equipment, some of its functions may and is Æ modifications and their effects can with roses with than Æ si ę the

details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device. details of the description in the manual. This is not a bug ę dem devices and device, but the result of post ę progress and you and głych modification work devices and device.

damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited damage to the device and equipment caused by the incorrect ś CIW and Supported and causes loss ę powers ñ under warranty. Any alteration cutter s and prohibited

and cause and loss ę warranty. and cause and loss ę warranty. and cause and loss ę warranty. and cause and loss ę warranty. and cause and loss ę warranty.

2. SAFETY S State 2. SAFETY S State 2. SAFETY S State

workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma workers operate and cy devices and device should have Æ the necessary ę coordinates qualifications entitling and ce them for you ę plasma

cutting:

•know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t know Æ health and safety devices during operation and money ñ electricity which are and device and Equipment to you ę cut plasmas and and fittings ę t

Auxiliary Power Supply and electric and,Auxiliary Power Supply and electric and,Auxiliary Power Supply and electric and,Auxiliary Power Supply and electric and,

•know Æ safety rules when handling compressed concentrations arek air. know Æ safety rules when handling compressed concentrations arek air. know Æ safety rules when handling compressed concentrations arek air. know Æ safety rules when handling compressed concentrations arek air. know Æ safety rules when handling compressed concentrations arek air.

• know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose. know Æ tre SC this manual and operated Æ device and device for its intended purpose.

EDGE WITH EQUIPMENT EDGE WITH EQUIPMENT EDGE WITH EQUIPMENT

these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying these ę a plasma can with s play with and Æ safety ñ State of the Operator and other persons staying and in smokers and in smokers

near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory near with u. Therefore, when you ę belongs with s keep Æ special ś precautions with Well ś you. before beginning and CASH to you ę belongs with y acquainted Æ si ę Obligatory

health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up: health and safety regulations and in force and main factors affecting the workplace. When you ę existing plasma cutting and ff ę following and ce risk with up:

•TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly TIME WITH EQUIPMENT PR AND DEM ELECTRIC - MO WITH E BY C w deadly

•ARC NEGATIVE IMPACT ON THE EYES AND SKIN Ê HUMAN ARC NEGATIVE IMPACT ON THE EYES AND SKIN Ê HUMAN ARC NEGATIVE IMPACT ON THE EYES AND SKIN Ê HUMAN

•POISONING AND GAS fumes

•BURNS

•THREATS WITH OF THE EXPLOSION AND AFTER WITH AREM THREATS WITH OF THE EXPLOSION AND AFTER WITH AREM THREATS WITH OF THE EXPLOSION AND AFTER WITH AREM THREATS WITH OF THE EXPLOSION AND AFTER WITH AREM THREATS WITH OF THE EXPLOSION AND AFTER WITH AREM

•NOISE

preventing season with pr-up and electrocution: preventing season with pr-up and electrocution: preventing season with pr-up and electrocution: preventing season with pr-up and electrocution: preventing season with pr-up and electrocution:

•Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset Temp and connectors Æ device and the device technically efficient electrical installation WŁA ś securing competent and effectiveness ś you reset

(additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment (additional protection Fouling with Resettable); should with s check Æ and correctly connected and whether Æ network so with e other devices and equipment

at the workplace,

•wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device, wires pr and governmental mounts Æ off the and assorted devices and device,

•do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices, do not touch Æ at the same time ś not non-insulated parts rts you handle the plasma, the subject of ę and the device housing and devices,

• not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation, not at with uses Æ brackets and wires pr and official with damaged insulation,

• under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you under conditions of a specific risk with down time with eniem pr and electrocution (in work ś environments with high with humidity above ś and you

closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves closed tanks ę these) to work Æ augmentation of helper and CYM work ę Watch and and CYM over safety ñ stwem ARE USED Æ clothing ir ę gloves

with good WŁA ś properties ś snip insulation with good WŁA ś properties ś snip insulation with good WŁA ś properties ś snip insulation with good WŁA ś properties ś snip insulation with good WŁA ś properties ś snip insulation

• if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut, if you noticed with pose any improperly ś you should with s return Æ si ę people who are competent in order to be removed ę cut,

• It is forbidden to operate devices and devices with photo ę these covers. It is forbidden to operate devices and devices with photo ę these covers. It is forbidden to operate devices and devices with photo ę these covers. It is forbidden to operate devices and devices with photo ę these covers. It is forbidden to operate devices and devices with photo ę these covers.

Preventing negative effects Electrical arc handwriting on the eyes and skin ę human: handwriting on the eyes and skin ę human: handwriting on the eyes and skin ę human:

• use Æ protective clothing (r ę gloves, apron, boots, leather) use Æ protective clothing (r ę gloves, apron, boots, leather) use Æ protective clothing (r ę gloves, apron, boots, leather) use Æ protective clothing (r ę gloves, apron, boots, leather) use Æ protective clothing (r ę gloves, apron, boots, leather)

•use Æ shields of helmets or protective PHARMACOLOGICAL ś properly matched filter, use Æ shields of helmets or protective PHARMACOLOGICAL ś properly matched filter, use Æ shields of helmets or protective PHARMACOLOGICAL ś properly matched filter, use Æ shields of helmets or protective PHARMACOLOGICAL ś properly matched filter, use Æ shields of helmets or protective PHARMACOLOGICAL ś properly matched filter,

• use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful use Æ protective veil of non-combustible materials and WŁA ś properly chosen Æ color patterns E S absorbing walls and smokers harmful

radiation,

• protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials. protects Æ person located and si ce ę near with u for your help and screens and protective materials.

Poisoning prevention fumes and gases secreted during those ę photos: during those ę photos: during those ę photos:

• keeps Æ headgear ę outside the smoke, keeps Æ headgear ę outside the smoke, keeps Æ headgear ę outside the smoke, keeps Æ headgear ę outside the smoke, keeps Æ headgear ę outside the smoke,

• use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange, use Æ device and the ventilation device being cut and and g and installed in limited air exchange,

• purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks) purging C w know with white air at work in closed space ę this (tanks)

• use Æ masks and respirators. use Æ masks and respirators. use Æ masks and respirators.

Preventing burns:

• use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and use Æ suitable and boats with protective and and protects shoes and ce of burns ñ dating and smokers from the arc radiation and

spatter,

• Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation Avoids Æ dirt ñ boats with s lubricants and oils can and cymi lead Æ its inflammation

Explosion prevention and the with arom: Explosion prevention and the with arom: Explosion prevention and the with arom:

•It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks It is forbidden ę operating devices and device and you ę cut in public threat with or explosive atmospheres with larger stocks

•The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting, The position you ę should be cut Æ equipment with They clutch ę t ga ś fighting,

• The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials. The position you ę body should strewn Æ si ę a safe distances ś those from flammable materials.

Preventing negative effects of noise:

• use Æ earplugs or other ś noise protection measures, use Æ earplugs or other ś noise protection measures, use Æ earplugs or other ś noise protection measures, use Æ earplugs or other ś noise protection measures, use Æ earplugs or other ś noise protection measures,

• Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at. Warns Æ about the dangers ñ stwie person located and si ce ę near with at.

EDGE WITH EQUIPMENT!EDGE WITH EQUIPMENT!EDGE WITH EQUIPMENT!

Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.Do not u with uses C sources pr and du to thaw with ania frozen ę these tubes.

Before starting devices and equipment should with y: Before starting devices and equipment should with y: Before starting devices and equipment should with y: Before starting devices and equipment should with y: Before starting devices and equipment should with y:

•check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation. check Æ connection status and June ñ electrical and mechanical. It is forbidden ę at with uses Æ brackets and wires pr and official with damaged insulation.

the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution the incorrect ś pistachio insulation brackets and wires pr and governmental threatens season with eniem pr and electrocution

• take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace. take care Æ about WŁA ś Competent working conditions, ie. will provide Æ WŁA ś CIW and temperatures é, humidity SC and ventilation ę in the workplace.

Closed off the premises ę protects those Æ from rain Closed off the premises ę protects those Æ from rain Closed off the premises ę protects those Æ from rain Closed off the premises ę protects those Æ from rain Closed off the premises ę protects those Æ from rain

•Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.Place ś these Æ CUTTING ę the site allows with Livia and Its easy CYM and Supported are present.

people operating and ce cutter ę should: people operating and ce cutter ę should: people operating and ce cutter ę should: people operating and ce cutter ę should: people operating and ce cutter ę should:

•know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting, know Æ and observes Æ Obligatory safety regulations and in force and ce the performance of ę plasma cutting,

• at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably at with uses Æ WŁA ś proper, specialized equipment ę here the protective r ę gloves, apron, rubber boots, shield or welding helmet with a suitably

selected filter

•know Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off andknow Æ tre SC this manual and operated Æ CUTTING ę in accordance with its intended purpose. Any repair device and devices can and would Æ made off and

only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not only after disconnecting and combined the power plug from the socket and lying. when the device and device is connected and connected to the network is not

allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the allowed to touch gol and r ę k and nor by the moist and boats Z any elements forming and circuit current smokers and du you ę cutting. It is forbidden to remove the

guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration guards outside ę Interior on the equipment and On device and included into the network. All processing of cutting their own s and prohibited and may and is Æ deterioration

of the security ñ countries. of the security ñ countries. of the security ñ countries.

All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices All maintenance and repair may and would Æ carried off and only by authorized persons under the terms safety ñ State labor Obligatory and in force and devices

for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting for smokers and money ñ electric. It is forbidden ę cutting operation in areas at risk with or explosive atmospheres with FIRE! The position you ę cutting

equipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whetherequipment with They should be Æ in equipment ę t ga ś At the end-fighting ñ done using power cord and cy devices and device should with s disconnect and whether

Æ from the network. Æ from the network.

The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account The above with above risk with drill and general safety rules is not exhaustive and safety issues ñ State your work while driving ę cut, the with not take into ę account

the and job site. Wa with NYM supplemented s andthe and job site. Wa with NYM supplemented s andthe and job site. Wa with NYM supplemented s andthe and job site. Wa with NYM supplemented s andthe and job site. Wa with NYM supplemented s andthe and job site. Wa with NYM supplemented s and

bench safety instructions, training and instructional with e given by supervisors.bench safety instructions, training and instructional with e given by supervisors.bench safety instructions, training and instructional with e given by supervisors.

3. GENERAL DESCRIPTION

The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter The cutter 40 serves CUTTER with s for you ę cut plasmas and aIR and sheets and elements of steel, aluminum and copper. It is a device and inverter

device, manufactured with components made in MOSFET technology. The cutter requires air supply from outside ę inner spring concentrations ark device, manufactured with components made in MOSFET technology. The cutter requires air supply from outside ę inner spring concentrations ark device, manufactured with components made in MOSFET technology. The cutter requires air supply from outside ę inner spring concentrations ark device, manufactured with components made in MOSFET technology. The cutter requires air supply from outside ę inner spring concentrations ark device, manufactured with components made in MOSFET technology. The cutter requires air supply from outside ę inner spring concentrations ark

air.

4. SPECIFICATIONS

4.1 Cut

40 CUTTER

Napi ę of power Napi ę of power Napi ę of power AC 230V 50Hz

Maximum power consumption 4.8 kVA

rated current and give you ę photos / cycle rated current and give you ę photos / cycle rated current and give you ę photos / cycle rated current and give you ę photos / cycle rated current and give you ę photos / cycle A 34/60%

Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos 9 mm

Current adjustment range and du you ę photos Current adjustment range and du you ę photos Current adjustment range and du you ę photos Current adjustment range and du you ę photos Current adjustment range and du you ę photos A 14-34

The method of regulating pr and du you ę photos The method of regulating pr and du you ę photos The method of regulating pr and du you ę photos The method of regulating pr and du you ę photos The method of regulating pr and du you ę photos Liquid

Maximum current consumption and du Maximum current consumption and du Maximum current consumption and du 20.5 A

Mass 9 kg

dimensions 371 x 153 x 232 mm

Degree ñ Fouling protection with Resettable Degree ñ Fouling protection with Resettable Degree ñ Fouling protection with Resettable Degree ñ Fouling protection with Resettable Degree ñ Fouling protection with Resettable IP21S

4.2 Wooden Handle

handle type PT31 type Esab

Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial Maximum load until Activities SC pr and Judicial 35 And

Duty cycle 60%

these ś the air pressure these ś the air pressure these ś the air pressure 3.5-5.0 bar (0.35-0.5 MPa)

Air flow 120 l / min

arc ignition tactile

Long SCLong SC 5 m

Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos Maximum thickness SC these ę photos

It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to It SC maximum thickness ś you you ę body was established under optimal conditions you ę cutting steel in ę welding rod as usual ś you. In order to

choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample. choose WŁA ś proper device and equipment recommended ę the execution of tests in real operating conditions and on the sample material sample.

Duty cycle

Duty cycle is based on a period of 10 minutowym.Cykl 60% means, with that after six minutes of operation devices and Equipment is required for 4-minute break. Duty cycle is based on a period of 10 minutowym.Cykl 60% means, with that after six minutes of operation devices and Equipment is required for 4-minute break. Duty cycle is based on a period of 10 minutowym.Cykl 60% means, with that after six minutes of operation devices and Equipment is required for 4-minute break. Duty cycle is based on a period of 10 minutowym.Cykl 60% means, with that after six minutes of operation devices and Equipment is required for 4-minute break. Duty cycle is based on a period of 10 minutowym.Cykl 60% means, with that after six minutes of operation devices and Equipment is required for 4-minute break.

Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption. Duty cycle of 100% means with e devices and device can with that worked Æ the way you and Continuously without interruption.

Attention! Heating test was carried out at a temperature of surrounding and the air. Duty cycle at 40 ° C was determined by simulation are present.Attention! Heating test was carried out at a temperature of surrounding and the air. Duty cycle at 40 ° C was determined by simulation are present.Attention! Heating test was carried out at a temperature of surrounding and the air. Duty cycle at 40 ° C was determined by simulation are present.Attention! Heating test was carried out at a temperature of surrounding and the air. Duty cycle at 40 ° C was determined by simulation are present.

Degree ñ protection Degree ñ protection Degree ñ protection

IP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñIP set ś la the extent to which devices and The unit is resistant to a passage ę to internal and inside pollution ñ

solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the solids and water. IP21S means with e devices and This product is designed for use in enclosed areas ę and those not suitable ę for use in the

rain or ś snow. rain or ś snow. rain or ś snow.

5. CONSTRUCTION AND OPERATION

Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in Fundamentals and the construction of the power conversion cutters s and electronics made in MOSFET technology enables with Livia and ce work ę in

terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz. terms of Part ę frequency ś you above with above 100 kHz.

The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body The principle of operation is based on rectified voltage ę cut single-phase mains and More on voltage ę a constant-voltage conversion obtained ę body

standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and standing on a rectangular course and high-angle part ę frequency ś Those voltage transformation ę cut in the range required for the process of ę cut and

re-erection of the resulting voltage ę photo on the voltage ę of a solid. re-erection of the resulting voltage ę photo on the voltage ę of a solid. re-erection of the resulting voltage ę photo on the voltage ę of a solid. re-erection of the resulting voltage ę photo on the voltage ę of a solid. re-erection of the resulting voltage ę photo on the voltage ę of a solid.

Fig.1 Scheme connected and connection devices and equipment Fig.1 Scheme connected and connection devices and equipment Fig.1 Scheme connected and connection devices and equipment Fig.1 Scheme connected and connection devices and equipment Fig.1 Scheme connected and connection devices and equipment

6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE 6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE 6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE 6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE 6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE 6. Cape AND CONNECTION TO SUPPLY NETWORK AND MORE

1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply, 1. office and equipment should be Æ at with off final useful and only in a single-phase power supply,

with a three-wire grounded neutral.

2. Plasma cutting CUTTER 40 s and adapted to cooperate with the network and 230V 50 Hz 2. Plasma cutting CUTTER 40 s and adapted to cooperate with the network and 230V 50 Hz 2. Plasma cutting CUTTER 40 s and adapted to cooperate with the network and 230V 50 Hz 2. Plasma cutting CUTTER 40 s and adapted to cooperate with the network and 230V 50 Hz 2. Plasma cutting CUTTER 40 s and adapted to cooperate with the network and 230V 50 Hz

secured and fuses 16 A time-delayed action. secured and fuses 16 A time-delayed action. secured and fuses 16 A time-delayed action.

3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s 3. office and equipped device with They are in the power cord and plug and months. before connect and EXCLUDING power should with s

make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached). make sure Æ si é, or switch and power switch is in the OFF position (off and attached).

7. Air system

inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer inside and inside the office and Equipment is located ę service unit consisting and months up ę reducer with pressure gauge and filter-dryer. Filter-dryer

equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies equipment with is located in the automatic drainage valve and old, whose outlet is located ę in the bottom ś wall of the office and device. empty with nannies

filter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office andfilter-dryer ff ę occurs automatically after being cut ę five (disconnect and combined) with pneumatic or possibly drop you ś pressure to take ś these "0". . office and

device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More device should be Æ arranged in such a way on the substrate with in, and with Eby allows with liwiało smooth outflow of liquid. appearance of ę drains and More

liquid from the device and Equipment is normal and indicates proper operation of the valve drainage liquid from the device and Equipment is normal and indicates proper operation of the valve drainage liquid from the device and Equipment is normal and indicates proper operation of the valve drainage

and lying. Filter-dryer does not require additional maintenance and lying. Filter-dryer does not require additional maintenance and lying. Filter-dryer does not require additional maintenance

at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control. at with user, please with y only temporarily made Æ its control.

Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device. Spr concentrations They should air with s connected and whether Æ for short slee Æ ca inlet on the back ś wall of the office and device.

Figure 2. The bottom ś The walls of the office and Equipment CUTTER 40 Figure 2. The bottom ś The walls of the office and Equipment CUTTER 40 Figure 2. The bottom ś The walls of the office and Equipment CUTTER 40 Figure 2. The bottom ś The walls of the office and Equipment CUTTER 40 Figure 2. The bottom ś The walls of the office and Equipment CUTTER 40

8. FUNCTIONAL DESCRIPTION SWITCHING AND Towels and POKR Ê Tel 8. FUNCTIONAL DESCRIPTION SWITCHING AND Towels and POKR Ê Tel 8. FUNCTIONAL DESCRIPTION SWITCHING AND Towels and POKR Ê Tel 8. FUNCTIONAL DESCRIPTION SWITCHING AND Towels and POKR Ê Tel 8. FUNCTIONAL DESCRIPTION SWITCHING AND Towels and POKR Ê Tel

1. The LED power

2. LED thermal protection devices or improper operation and2. LED thermal protection devices or improper operation and

equipment

3. Pressure gauge you ś air pressure 3. Pressure gauge you ś air pressure 3. Pressure gauge you ś air pressure

4. knob ę you adjust the background ś air pressure 4. knob ę you adjust the background ś air pressure 4. knob ę you adjust the background ś air pressure 4. knob ę you adjust the background ś air pressure 4. knob ę you adjust the background ś air pressure

5. Power Cord Mass

6. Holder plasma

7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos 7. knob ę background adjustment pr and du you ę photos

8. Off and main switch 8. Off and main switch 8. Off and main switch

9. You ś display 9. You ś display 9. You ś display

Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection Prepared for the office workplace and Attachment device and switches off ę L and towel (8) is and CYM up ę on the front panel. On and cutting connection

indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure. indicated by lighting up ę LEDs (1). setting pr and du you ę body made up ę knob ę background (7). knob ę background (4) regulates a ę these ś the air pressure.

It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage. It SC these ś manometer indicates the pressure (3). The LED (2) indicates overheating or abnormal and wash ę e.g., cutting. short circuit or damage.

9. CI Ê CIE plasma TV AND aIR AND9. CI Ê CIE plasma TV AND aIR AND9. CI Ê CIE plasma TV AND aIR AND9. CI Ê CIE plasma TV AND aIR AND9. CI Ê CIE plasma TV AND aIR AND9. CI Ê CIE plasma TV AND aIR AND

9.1. Preparing device and Equipment for work 9.1. Preparing device and Equipment for work 9.1. Preparing device and Equipment for work

Half and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrationsHalf and whether Æ device and device with with source of spring concentrations Superior air. The air should be Æ dry and free of oil. (Je with If the compressed air concentrations

ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure. ark comprises an oil or water ę should with s installation ę aIR and equipment with s Æ an additional air dryer and a filter). set Æ WŁA ś competent you ś the air pressure.

connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz. connect and whether Æ ground cable to the item you ę this. connect and whether Æ plug ę device and devices into a power outlet 230V 50Hz.

9.2. Setting these parameters ę photos 9.2. Setting these parameters ę photos 9.2. Setting these parameters ę photos

knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting. knob ę background adjustment pr and du you ę photos (7) set C. dan and worth SC pr and du you ę cutting.

9.3. initiation arc

Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material Close with s Æ you handle ę this element and lightly touch it and c On and whether Æ button on the handle. Nast and pi spark me ę between the material

and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will and the electrodes and while opening the air valve, which causes the glow of the plasma arc, and thus starts ę process you ę cut, which b ę It will

continue until you release the button on the handle.

9.4. keeping you ę cutting.9.4. keeping you ę cutting.9.4. keeping you ę cutting.

In order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ UloIn order to avoid ę body interference ñ a glow ę arc during those ę or moving body holder ę dem material should be Æ even, and the nozzle holder should be Æ Ulo

with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This, with It perpendicular to the element you ę This, at a fixed distances ś you from him. proper and ratings ę pr ę speed ś you you ę body seems ę on the basis of k and This,

at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The at which you ę you ejected material on the side of its lower edge ę tools, as well as with an observation based on material flow, and those ę this surface. The

best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to best results you ę body receives a ę follow and c maximum pr ę speed ś you. In case the pr ę speed SC these ę cut is too large with and, stream ñ It is not able to

sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die, sufficiently melt Æ metal and discarded Æ it outdoors and Inside the element you ę of what could with s cause Æ a referral ę part rts of molten metal to the die,

and thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SCand thus lead Æ to serious with football failure. If you ę cut thin sheets of aluminum and ę You should start a Æ si ę slow to properly penetrated Æ material. Fast SC

these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material. these ę body can with the related ę greater Æ penetrated the ę five for the lower arch and edge ę d with these ę this material.

During normal operation of a distance holder of the material should be Æ from 0 to 2 mm. In the case of solar flares arc or when the flame of his ñ bDuring normal operation of a distance holder of the material should be Æ from 0 to 2 mm. In the case of solar flares arc or when the flame of his ñ bDuring normal operation of a distance holder of the material should be Æ from 0 to 2 mm. In the case of solar flares arc or when the flame of his ñ bDuring normal operation of a distance holder of the material should be Æ from 0 to 2 mm. In the case of solar flares arc or when the flame of his ñ bDuring normal operation of a distance holder of the material should be Æ from 0 to 2 mm. In the case of solar flares arc or when the flame of his ñ b

ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you ę be green or arc b ę will emit any abnormal sound should with s off immediately and whether Æ device and device and check Æ part of the state rts you

wear with sailing and radiant are present.wear with sailing and radiant are present.wear with sailing and radiant are present.wear with sailing and radiant are present.wear with sailing and radiant are present.wear with sailing and radiant are present.

these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the these ę a can with the break Æ by releasing the button on the handle or by the sudden lifting of the handle material. After releasing the button on the

handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the handle ff and pi immediately shuts off ś than ę of arc, and after several seconds Off and flow connection spr concentrations Superior air. delay with the

pressure off and combined movement of spring concentrations Superior air has to cool the heated components of the handle. pressure off and combined movement of spring concentrations Superior air has to cool the heated components of the handle. pressure off and combined movement of spring concentrations Superior air has to cool the heated components of the handle. pressure off and combined movement of spring concentrations Superior air has to cool the heated components of the handle. pressure off and combined movement of spring concentrations Superior air has to cool the heated components of the handle.

10. BEFORE CALLING SERVICE

In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them In the event of a malfunction device and devices, before sending the cutting service to be with s check Æ letter ę basic failure and try Æ remove them

yourself rte d.yourself rte d.

Any repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office andAny repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Attention! office and

device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns. device is not sealed and in with Users can with e pictures rte d housing ę cutters to remove ę cutting minor breakdowns.

symptoms Cause fast ę seriously fast ę seriously fast ę seriously

No power, signal failure or malfunction

device and equipment device and equipment device and equipment

No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment No calls and or loose connection with inside the plug and inside the office and equipment check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside check Æ and improve Æ half and all connection plugs inside and inside

the office and equipment the office and equipment the office and equipment

after incl and switched power supply LED after incl and switched power supply LED after incl and switched power supply LED

signaling is not ś lit ęsignaling is not ś lit ęsignaling is not ś lit ęsignaling is not ś lit ę

No voltage ę power cut No voltage ę power cut No voltage ę power cut check Æ He joins the fuses and Check the check Æ He joins the fuses and Check the check Æ He joins the fuses and Check the check Æ He joins the fuses and Check the check Æ He joins the fuses and Check the

network feel Æ if there is voltage ę a network network feel Æ if there is voltage ę a network network feel Æ if there is voltage ę a network network feel Æ if there is voltage ę a network network feel Æ if there is voltage ę a network

Once connected and switched power diode Once connected and switched power diode Once connected and switched power diode

signaling no power ś lit ęsignaling no power ś lit ęsignaling no power ś lit ęsignaling no power ś lit ę

switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and power switch is located ę in position with Off-up switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components switch and whether Æ excl and switch (8) in position, with ON components

LED signaling power supply ś lit é, the fan is LED signaling power supply ś lit é, the fan is LED signaling power supply ś lit é, the fan is LED signaling power supply ś lit é, the fan is LED signaling power supply ś lit é, the fan is

not working, no voltage ę cut output ś partial. not working, no voltage ę cut output ś partial. not working, no voltage ę cut output ś partial. not working, no voltage ę cut output ś partial. not working, no voltage ę cut output ś partial.

Napi ę the power of and which it is unstable and causes incl andNapi ę the power of and which it is unstable and causes incl andNapi ę the power of and which it is unstable and causes incl andNapi ę the power of and which it is unstable and causes incl andNapi ę the power of and which it is unstable and causes incl andNapi ę the power of and which it is unstable and causes incl and

overvoltage protection connection ę processing industry overvoltage protection connection ę processing industry overvoltage protection connection ę processing industry

off and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æoff and whether Æ device and take 2-3 minutes and owned and whether Æ

again

On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On On short-term and connection and off and connection switch and On

switch caused and overvoltage protection connection ę processing switch caused and overvoltage protection connection ę processing switch caused and overvoltage protection connection ę processing switch caused and overvoltage protection connection ę processing switch caused and overvoltage protection connection ę processing

industry

again

Not bow strikes out ęNot bow strikes out ę No WŁA ś proper contact wire crimp mass No WŁA ś proper contact wire crimp mass No WŁA ś proper contact wire crimp mass improve Æ mass contact terminal improve Æ mass contact terminal improve Æ mass contact terminal

faulty switch and plasma switch in the handle faulty switch and plasma switch in the handle faulty switch and plasma switch in the handle replace Æ switch and switch replace Æ switch and switch replace Æ switch and switch replace Æ switch and switch replace Æ switch and switch

the incorrect ś competent connected and connection to the the incorrect ś competent connected and connection to the the incorrect ś competent connected and connection to the the incorrect ś competent connected and connection to the the incorrect ś competent connected and connection to the

office holder plasma and equipment office holder plasma and equipment office holder plasma and equipment

check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or check Æ connection status and June ñ electric holder check Æ or

pins in a nest with are not going and Deadlock broken or not andpins in a nest with are not going and Deadlock broken or not andpins in a nest with are not going and Deadlock broken or not andpins in a nest with are not going and Deadlock broken or not andpins in a nest with are not going and Deadlock broken or not andpins in a nest with are not going and Deadlock broken or not and

si ęsi ę

Ś lit ę LED overheating Ś lit ę LED overheating Ś lit ę LED overheating Ś lit ę LED overheating office and device has been overheated. office and device has been overheated. office and device has been overheated. wait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ thesewait Æ a few minutes with LED shuts off ś and not continue Æ these

ę you. ę you.

The fan is not working The fan was blocked folded ę t andThe fan was blocked folded ę t andThe fan was blocked folded ę t andThe fan was blocked folded ę t and

shields andshields and

upright Æ shields ę fan upright Æ shields ę fan upright Æ shields ę fan upright Æ shields ę fan upright Æ shields ę fan

unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos unsatisfactory and as ca SC these ę photos Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those Bad as SC at with parts and materials used rts those

supplies,

replace Æ part rts those supplies replace Æ part rts those supplies replace Æ part rts those supplies replace Æ part rts those supplies replace Æ part rts those supplies

The air flows from inadequate andThe air flows from inadequate and

intensity ś these andintensity ś these andintensity ś these andintensity ś these and

check Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrationscheck Æ in until Implement and cy air, improve Æ half and in connection concentrations

and the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrationsand the zł and pods and state szybkozł and Check whether Æ spr concentrations

ark ę air ark ę air ark ę air

11. OPERATION AND USER LIST CZ ES CI SUPPLIES 11. OPERATION AND USER LIST CZ ES CI SUPPLIES 11. OPERATION AND USER LIST CZ ES CI SUPPLIES

Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust. Operation of devices and Equipment should be done CUTTER 40 Æ si ę in an atmosphere free from components with r and smokers and du with ego dust.

Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers, Do not with s sets Æ device and equipment in a dusty, near with at work and grinders etc. smokers. Dust and pollution control filings metallic plates and smokers,

and half pipes and June ñand half pipes and June ñand half pipes and June ñand half pipes and June ñ

internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments internal and inside the office and devices can with s lead Æ electrical short, and consequently to damage to the cutter. It should with avoided Æ operation in ś environments

with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep with high with humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep

dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting dew on the metal parts, eg. after the cold office and Equipment to be a warm room with s wait Æ until disappearance ę cut dew. It is recommended ę if cutting

operation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę followingoperation outdoor place it under a roof to protect against adverse weather conditions. office and CUTTER device 40 should be Æ operated in next ę following

and conditions: and conditions:

-value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10% value changes ś you effective voltage ę Power cut no wi ę greater than with 10%

- ambient temperature of from -10 ° C to + 40 ° C

- these ś Atmospheric pressure 860 to 1060 hPa these ś Atmospheric pressure 860 to 1060 hPa these ś Atmospheric pressure 860 to 1060 hPa

- humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80% humidity SC or ę the bottom of the air no wi ę greater than with 80%

- high SC above sea level to 1000m high SC above sea level to 1000m high SC above sea level to 1000m

You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type: You k from parts rts those operating handle plasmas about Esab PT31 acid type:

lp Name Catalog No.

TECWELD

Referention

number

1 Electrode 1 Electrode 18205 18205

2 nozzle 1.0 2 nozzle 1.0 18866 18866

3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 3 Pier ś you ñ swirl and cy 18785 18785

4 The sleeve 4 The sleeve 18204 18204

The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl The full list of parts rts You consumables and parts rts spare parts available ę It is available on the website and in the company www.tecweld.pl

TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you. TECWELD. there is a possibility with possibility SC directly ś middle part of the purchase rts you.

12. INSTRUCTIONS FOR MAINTENANCE

As part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñAs part of the daily operation should with be maintained at Æ CUTTING ę in a purely ś these checks and Æ connection status and June ñ

external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside external ę Interior. regularly lists Æ part rts those supplies. Periodically (depending with not the working conditions) or ś these Æ device and internal device and Inside

blow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñblow through spring concentrations salty air to remove ę dust and swarf cutting metal plates with control and smokers and wires and connect and June ñ

electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace electric. Not less than with once a month and cu checks Æ condition of the filter cup and the water separator air preparation unit. If they wear with replace

life Æ for new ones. life Æ for new ones. life Æ for new ones.

part List rts Spare air preparation unit Lp. part List rts Spare air preparation unit Lp. part List rts Spare air preparation unit Lp.

Name Catalog No. TECWELD

1 chalice separator 7811366

2 Drain valve 7811368

3 filter dryer 7811367

Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you: Not less than with once every six months should with s will Æ general overview and du and the state calls and June ñ electrical, and in particular ś you:

- Fouling protection status with Resettable Fouling protection status with Resettable Fouling protection status with Resettable

- the insulation

- Security system status ñSecurity system status ñ

- correctness ś those actions cooling system correctness ś those actions cooling system correctness ś those actions cooling system

13. INSTRUCTION STORAGE AND TRANSPORT

office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust. office and device should with s store Æ at -10 ° C to + 40 ° C and relative humidity ś of relative ę org to 80% free with r and smokers fumes and dust.

Transportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should withTransportation of packaged devices and money ñ It should take place Æ si ę indoor ś by public transport. Packaged for transport devices and device should with

be secured Æ before moving up ębe secured Æ before moving up ębe secured Æ before moving up ębe secured Æ before moving up ę

and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.and ensure Æ the WŁA ś CIW and position are present.

14. COMPLETE SPECIFICATION

1. Cut 1 piece.

2. Handle for you ę cut plasmas and PT31 type Esab 2. Handle for you ę cut plasmas and PT31 type Esab 2. Handle for you ę cut plasmas and PT31 type Esab 2. Handle for you ę cut plasmas and PT31 type Esab 2. Handle for you ę cut plasmas and PT31 type Esab 1 piece

3. Earth cable with a clamp 1 piece.

4. welding shield 1 piece.

5. Hammer welding with brush and5. Hammer welding with brush and 1 piece.

6. Manual 1 piece.

7. Packaging 1 piece.

15. SCHEME ELECTRICAL

16. GUARANTEE

Provide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic andProvide a guarantee ę for a period of 12 months ę months leading actors and smokers activity SC economic and

or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be or 24 months and ce for consumers from the date of sale with s. Warranty b ę be

respected after the presentation by advertise and lying proof of purchase (invoice or and lying proof of purchase (invoice or

receipt) and the warranty card entered and names and product serial number, date receipt) and the warranty card entered and names and product serial number, date receipt) and the warranty card entered and names and product serial number, date receipt) and the warranty card entered and names and product serial number, date receipt) and the warranty card entered and names and product serial number, date and he'll sell with s and he'll sell with s and he'll sell with s and he'll sell with s

bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty bearing and seal and tk and point of sale with s. In the case of warranty

repair advertised devices and device should with y sends Æ the company TECWELD and device should with y sends Æ the company TECWELD and device should with y sends Æ the company TECWELD and device should with y sends Æ the company TECWELD and device should with y sends Æ the company TECWELD and device should with y sends Æ the company TECWELD

companies and forwarding service and GLS. Shipments sent at the expense of the TECWELDcompanies and forwarding service and GLS. Shipments sent at the expense of the TECWELDcompanies and forwarding service and GLS. Shipments sent at the expense of the TECWELDcompanies and forwarding service and GLS. Shipments sent at the expense of the TECWELDcompanies and forwarding service and GLS. Shipments sent at the expense of the TECWELD after ś through other companies after ś through other companies after ś through other companies

forwarding will not ę d and accepted !! forwarding will not ę d and accepted !! forwarding will not ę d and accepted !! forwarding will not ę d and accepted !! forwarding will not ę d and accepted !!

office and complaints sent to the device must be Æ packed in the original carton, and protected by Styrofoam original fittings. TECW ELD office and complaints sent to the device must be Æ packed in the original carton, and protected by Styrofoam original fittings. TECW ELD office and complaints sent to the device must be Æ packed in the original carton, and protected by Styrofoam original fittings. TECW ELD office and complaints sent to the device must be Æ packed in the original carton, and protected by Styrofoam original fittings. TECW ELD office and complaints sent to the device must be Æ packed in the original carton, and protected by Styrofoam original fittings. TECW ELD

Company shall not be liable ś you for damage caused during transport cutter.Company shall not be liable ś you for damage caused during transport cutter.Company shall not be liable ś you for damage caused during transport cutter.

them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household them with If you plan to get rid of Æ si ę this product, do not dispose of together with normal household

waste. According to the WEEE Directive (Directive 2002/96 / EC) Obligatory and in force and More in waste. According to the WEEE Directive (Directive 2002/96 / EC) Obligatory and in force and More in waste. According to the WEEE Directive (Directive 2002/96 / EC) Obligatory and in force and More in waste. According to the WEEE Directive (Directive 2002/96 / EC) Obligatory and in force and More in waste. According to the WEEE Directive (Directive 2002/96 / EC) Obligatory and in force and More in

the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y the European Union for u with ywanego equipment ę electrical and electronic equipment should with y

USE Æ methods of utilization. USE Æ methods of utilization. USE Æ methods of utilization.

In Poland, in accordance with the provisions of the Act of July 1, 2005. about zu with the used In Poland, in accordance with the provisions of the Act of July 1, 2005. about zu with the used In Poland, in accordance with the provisions of the Act of July 1, 2005. about zu with the used

equipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes withequipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes withequipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes withequipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes withequipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes withequipment ę of electrical and electronic equipment it is prohibited to place ł and Including other wastes with

ytego equipment ę MARK crossed here ś PARTICULAR trash.ytego equipment ę MARK crossed here ś PARTICULAR trash.ytego equipment ę MARK crossed here ś PARTICULAR trash.ytego equipment ę MARK crossed here ś PARTICULAR trash.ytego equipment ę MARK crossed here ś PARTICULAR trash.

AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point AT with user who intends to get rid of Æ si ę this is the obligations and tied to donate zu with ytego equipment ę electrical and electronic collection point

zu with ytego equipment ę here. Collection points are conducted andzu with ytego equipment ę here. Collection points are conducted andzu with ytego equipment ę here. Collection points are conducted andzu with ytego equipment ę here. Collection points are conducted andzu with ytego equipment ę here. Collection points are conducted andzu with ytego equipment ę here. Collection points are conducted and

among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste among others by wholesalers and retailers of equipment ę here and the communal organizational units conducting and ce activity SC in waste

collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego collection. above with Obligatory six and Compounds laws have been introduced to limit the amount ś you waste resulting from wear with ytego

equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here. equipment ę electrical and electronic equipment and to ensure an adequate level of collection, recovery and recycling of with ytego equipment ę here.

Proper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and siProper implementation of these Obligatory and not display is particularly important in the case when zu with the used equipment ę located close and si

ę dangerous ingredients that have and particularly negative impact on ś environment and human health.ę dangerous ingredients that have and particularly negative impact on ś environment and human health.ę dangerous ingredients that have and particularly negative impact on ś environment and human health.ę dangerous ingredients that have and particularly negative impact on ś environment and human health.ę dangerous ingredients that have and particularly negative impact on ś environment and human health.ę dangerous ingredients that have and particularly negative impact on ś environment and human health.

TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald TECWELD Peter Polak 41-943 Piekary Ś l and State Street. Emerald

21/3/6 Branch:

41-924 Bytom, ul. cross with 3 words 41-924 Bytom, ul. cross with 3 words 41-924 Bytom, ul. cross with 3 words

Tel. (+48 32) 38-69-428, fax (+48 32) 38-69-434 e-mail:

[email protected] www.tecweld.pl

DECLARATION OF CONFORMITY Ś CI DECLARATION OF CONFORMITY Ś CI DECLARATION OF CONFORMITY Ś CI

01 / CUTTER40 / 2016

authorized with manufacturer's representative: authorized with manufacturer's representative: authorized with manufacturer's representative:

TECWELD Peter Polak

41-943 Piekary Ś l and State Street. 41-943 Piekary Ś l and State Street. 41-943 Piekary Ś l and State Street. 41-943 Piekary Ś l and State Street. 41-943 Piekary Ś l and State Street.

Emerald 21/3/6

branch:

41-909 Bytom ul.

cross with Half POLISH cross with Half POLISH cross with Half POLISH

We declare, with e ni with article mentioned above: We declare, with e ni with article mentioned above: We declare, with e ni with article mentioned above: We declare, with e ni with article mentioned above: We declare, with e ni with article mentioned above:

plasma cutter

Trade name: 40 CUTTER

Type: CUT 30H

Manufacturer's trademark:

which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These which refers ę meets the requirements of this declaration seq ę following and smokers of European Union directives and national rules enter and These

smokers Directive:

Low Voltage Directive ę Partial LVD 2006/95 / EC Low Voltage Directive ę Partial LVD 2006/95 / EC Low Voltage Directive ę Partial LVD 2006/95 / EC

compatibility Directive ś Electromagnetic EMC 2004/108 / EC compatibility Directive ś Electromagnetic EMC 2004/108 / EC compatibility Directive ś Electromagnetic EMC 2004/108 / EC

II RoHS Directive 2011/65 / EU

and is compatible with ff ę following and Norms: and is compatible with ff ę following and Norms: and is compatible with ff ę following and Norms: and is compatible with ff ę following and Norms: and is compatible with ff ę following and Norms:

BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy, BS EN 60974-1: 2013-04 equipment ę t arc welding - Th ESC 1: Welding with sources of energy,

BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic BS EN 60974-10: 2010 equipment ę t arc welding - Th ESC 10: Requirements for and ce compatibility ś electromagnetic

compatibility (EMC)

BS EN 50581: 2013-03 Technical documentation evaluation of electronic and electrical products, taking into ę account the BS EN 50581: 2013-03 Technical documentation evaluation of electronic and electrical products, taking into ę account the BS EN 50581: 2013-03 Technical documentation evaluation of electronic and electrical products, taking into ę account the BS EN 50581: 2013-03 Technical documentation evaluation of electronic and electrical products, taking into ę account the

limitation of use of hazardous substances.

Year affix the CE mark on the device and device: Year affix the CE mark on the device and device: Year affix the CE mark on the device and device: 2015

Bytom, dn. 01/07/2016 Peter Polak

(Signature of authorized person with nion (Signature of authorized person with nion (Signature of authorized person with nion

Table of contents

Other Sherman Welding System manuals