Sherpa COMFORT RIDE User manual

B. assemble carrier
1. Place top shell on bottom shell, aligning at the
start of the zippers.
(Fig 4)
2. Connect top shell zipper to the bottom shell
zipper.
(Fig 5)
3. As you finish zipping the shells together the
zipper will overlap itself. Be sure to tuck the
beginning of the zipper underneath the end as
shown.
(Fig 6)
C. attach shoulder strap
1. Unfold the shoulder strap and drape across the
carrier, making sure that the padding is facing
down, the strap is facing up, and there are no twists
in the strap.
2. Feed one end through one of the top webbing loops
at the back of the carrier.
(Fig 7)
3. Slide metal fastener onto the bottom webbing loop,
making sure to go through both layers of webbing
until the fastener is locked in place.
(Fig 8)
4. Pull loose end diagonally across the carrier. Repeat
steps 2 & 3 with the loose end as described above.
(Fig 9)
Note: To wear the carrier on your right side, connect the strap
from the front mesh side to the back pocket side. To wear the
carrier on your left side, connect the strap from the front
pocket side to the back mesh side.
A. Insert support plate
1. Unfold top shell and turn upside down. Find the
pocket on the underside and open the
hook-and-loop closure.
(Fig 1)
2. Holding support plate in one hand, bend to a
curved shape and insert it completely into pocket.
The curved side should push against the top of
the shell to create the domed shape.
(Fig 2)
3. Press hook-and-loop closure to secure. (Fig 3)
00460-72069-201 page 1
COMFORT RIDE™PET CARRIER
a
ZIPPERED SIDE POCKET
BOTTOM
WEBBING LOOPS
POCKET SIDE
MESH SIDE
REMOVABLE LINER
b
d
c
Remove all parts from box and the protective inner bag.
Open the zippered side pocket on the top shell to find the
adjustable shoulder strap and support plate.
TOP
WEBBING
LOOPS
a. Top shell
b. Bottom shell with liner
Locate parts
c. Adjustable shoulder strap
d. Support plate
Fig 1
Fig 3
Fig 2
Fig 4
Fig 5
Fig 6
Fig 7
Fig 9
Fig 8

Manufactured for Worldwise, Inc.
6 Hamilton Landing, Suite 150
Novato, CA 94949 USA
[phone]
[email protected]
www.sherpapet.com
Designed in the USA, Made in China
1 year warrAnty
CARE INSTRUCTIONS: Unzip liner from base.
Machine wash liner, cold. Air dry. Wipe base and
frame with damp cloth.
WARNING: HOT CARS ARE DANGEROUS FOR PETS.
NEVER LEAVE YOUR DOG UNATTENDED IN A CAR.
For pets only. This is not a toy. Keep out of reach of
children and pets when not in use. This carrier is not
a kennel or permanent habitat and is intended for pet
transport only. Train your pet to be comfortable in the
carrier before travel use. Do not leave pet unattended
with/in carrier. When using this carrier in your car,
please be sure it is correctly installed in the back seat
only per included instructions. Do not allow pets to
chew on the carrier. Inspect regularly and immedi-
ately discontinue use if any part becomes loose or
detached. Do not use or store near heat or flame.
Remove all packaging and dispose of properly, or
retain in a safe place, as appropriate.
Worldwise®will not accept the return of a bag that
has carried an animal. The original purchase receipt
must be provided to submit a warranty claim.
Please see insert inside the bag for details or visit
www.sherpapet.com.
SherpaPet @sherpabrand
COMFORT RIDE™PET CARRIER
a
ZIPPERED SIDE POCKET
BOTTOM
WEBBING LOOPS
POCKET SIDE
MESH SIDE
REMOVABLE LINER
b
d
c
E. Fold down for storage
1. Unzip top shell from bottom shell. (Fig 10)
2. Open the pocket on the underside of the top shell
and remove support plate.
(Fig 13)
3. Store the support plate in the side pocket. (Fig 14)
4. Lay the top shell on its side and push down to
collapse.
(Fig 15)
5. Store the folded top shell with the bottom shell.
D. remove liner for washing
1. Unzip top shell from bottom shell. (Fig 10)
2. Unzip liner from bottom shell and remove to wash.
Be sure to follow all care instructions.
(Fig 11)
3. To reattach liner, connect liner zipper to the inner
bottom shell zipper. As you finish zipping the shells
together the zipper will overlap itself. Be sure to
tuck the beginning of the zipper underneath the end
as shown.
(Fig 12)
Remove all parts from box and the protective inner bag.
Open the zippered side pocket on the top shell to find the
adjustable shoulder strap and support plate.
TOP
WEBBING
LOOPS
a. Top shell
b. Bottom shell with liner
Locate parts
c. Adjustable shoulder strap
d. Support plate
Fig13
Fig15
Fig14
Fig10
Fig11
Fig12
page 2