Sherwood PAIR DINING CHAIR User manual

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 1 of 7
Thank you for purchasing the SHERWOOD Pair Dining Chair.Please read the instructions
carefully to ensure safe operation of the product.
Size: L450 x 520 x H985
Colour: Brown PU
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required
Tools: as hardware package
Persons required for assembly: 2 persons
Time for assembly: 30 minutes

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 2 of 7
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Tools not included.
WARNINGS
•DO NOT use power tools to construct this product.
•DO NOT over tighten screws or bolts.
•DO NOT use this product if parts are missing, damaged or worn.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
• To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 3 of 7
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
Parts
1 2 3 4
Description: Padded seat
Qty: 1pc
Carton No: 1/1
Description: Stretchers
Qty: 2pcs
Carton No: 1/1
Description: Front legs
Qty: 2pcs
Carton No: 1/1
Description: Chair back
Qty: 1pc
Carton No: 1/1

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 4 of 7
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
FITTINGS (NOT TO SCALE)

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 5 of 7
Layout Parts on Soft Surface
Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 6 of 7
STEP
Parts Required

SHERWOOD PAIR DINING CHAIR ASSEMBLY INSTRUCTIONS
Batch No.
Page 7 of 7
Complete Assembly
Your Sherwood Pair Dining Chair is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference