Shinybow USA CAT-5 YUV Series User manual

Supplied Accessories
Check that you have the following components
in your converter pack ;
(1) 1 x Instruction Manual
(2) 1 x Transmitter or Repeater or Receiver
(3) 1 x AC Adaptor : 12VDC, @300mA
Introduction
Before you make any connections
Make sure all Video devices to be connected to the CAT5 Transmitter/Repeater/Receiver are
functioning according to their respective operation manuals before connecting them. Always
connect the YUV devices to the CAT5 Tx/Rx one at a time and make sure each works just as it
did before it was connected.
Congratulations on your purchase of one the The SB-6330 is CAT-5 Component and Audio
TRANSMITTER via simple Category 5 (CAT5) UTP cable to transmit Component Video
and Digital Audio or Composite Video and Stereo Audio for long distance connect to
Component Video : * Repeater of SB-6230R & SB-6340R
* Receiver of SB-6130R & SB-6330R. When connect To
Digital Audio(Composite Video) : * Repeater of SB-6235R or SB-6345R.
* Receiver of SB-6330R.
Transmitter(Tx) provide excellent overall performance and versatility. Its define a major
advancement beyond using discrete op amps for transmit differential Component/Audio
signals over twisted pair category cable. Use a triple, differential or single-ended input to
differential output transmit. Specifically designed for YUV signals but can be used for any
type of Video signals or high speed data transmission. Auto Tint and brightness control
design on board. High speed amplifiers designed to operate three group signals with high
performance quality of HDTV signals. The length to 1000 feet extend to REPEATER or
RECEIVER for output to multiple high definition HDTV/plasma display. Use category 5 cable.
Transmitter support double CAT5 outputs and one loop(Repeater) out port for preview AV
sources by HDTV display on the same time. The terminators are Rj45 (Category 5) jack and
Component-Digital-Audio sockets.
Specifications :
YUV Resolution
1080i (1920 x1080)
Cable for CAT5,5e
SB-6330 (Tx), SB-6330R (Rx)
Model Number
Tx, Rx Input/output
Transmitter & Receiver
Component Video (YPBPR) / Digital (Composite) / Stereo Audio
Type of Signals
Power Consumed
SB-6330(@300mA), SB-6330R(@300mA)
Power Source
DC 12 Volts, SB-6330(@300mA), SB-6330R(@300mA)
Size (L,W,H)
2.75 in x 2.60 in x 1 in (70x66x26mm)
Net Weight (Unit only)
0.4 lbs. (0.24kg) Approx.
In/Out Terminal
Rj45 Jack, HD-15 and Ear phone Jack female connectors.
Video Bandwidth
Tx : 400 Mhz, 13dB full power, Rx : 270MHz 1090V/us@G=+1
Tx slew rate
2000 V/us
Audio Frequency response
20Hz to 20KHz, +/-1db
Tx: 68dB SFDR@5 Mhz 200 load. Rx: 1 Vp-p@5MHzW
Low distortion
720p (1080 x 720)
480p (720 x 480)
1 M differentialW
Rx High input impedance
1000 feet
450 feet
600 feet
Distance
Video Maximum input levels
3.1 Vp-p(line level)
1.45 Vp-p
Audio Maximum input levels
Safeguards and Precautions
A. Keep this unit away from fire, extremely hot areas, water or moisture of any Kind.
B. Do not place this unit on any support that is not firm, level and strong.
C. Do not service the unit yourself. Opening the unit's housing will void the warranty.
D. Servicing must be by Shinybow or by an authorized technician.
C. Illegal duplication of copyrighted material is strictly prohibited by Federal Laws.
Typical Hookup and Operation
APPLICATIONS:
TX : Video line driver, Digital line driver, Low power differential
ADC driver, Signal-ended input to differential output driver
RX : High speed differential line receivers, Differential-to-sigle-
ended converters, High speed instrumentation amps, level shifting.
SB-6330R
RECEIVER
SB-6330
TRANSMITTER
2002 /95/E C
RoHS
Component Vid eo-D igita l(c omposite Video)- Ste reo Audio Transmitt er sig nals :
480p(7 20x480), 720p(1 080x720), 1080i(1 920x1080)
Front View Rear View
Front View Rear View
Front:
Input : 1x Component Video(YPBPR)
1x Digital or (Composite)+Stereo audio
Rear :
Output : 1x CAT5 (Tx) Transmitter
1x CAT5 (Tx) Transmitter
Front :
Input : 1x CAT5 (Rx) Receiver
1x CAT5 (Rx) Receiver
Rear :
Output : 1x Component Video(YPBPR)
1x Digital(Composite)+Stereo audio
Installing
Power Input : DC 12V, @300mA
Power Input : DC 12V, @300mA
SB-6330 SB-6330R
TRANSMITTER
RECEIVER
1000 fe et
Y
PB
PR
Digital
AL
AR
Y
PB
PR
Digital
AL
AR
CAT-5 out-2
CAT-5 out-1
Aud io
SB-613 5R
SB-623 5R
SB-633 0R
SB-634 5R
YUV
SB-613 0R
SB-623 0R
SB-633 0R
SB-634 0R
CAT-5 Aud io in
YUV
CAT-5 YUV in
Aud io
SB-613 5R
SB-623 5R
SB-633 0R
SB-634 5R